CISCO-IGMP-SNOOPING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
16
Rows
16
Columns
108
.1.3.6.1.4.1.9.9.263.1.2.1 · 1 row entry · 19 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cisInterfaceStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IGMP-SNOOPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IGMP-SNOOPING-MIB::cisInterfaceStatsTable'
Table contains statistics information for IGMP Snooping. An
entry appears in this table for each IGMP Snooping capable 
interface in the device.
cisInterfaceStatsEntry row .1.3.6.1.4.1.9.9.263.1.2.1.1
An entry contains statistics information for a specific IGMP
Snooping capable interface. It provides information about
IGMP messages and reports that have been transmitted and
received at the interface.
Indexes
Column Syntax OID
Total IGMP General Queries that have been transmitted through
an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.1
Total IGMP Group-Specific Queries that have been transmitted
through an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.2
Total IGMP Membership Reports that have been transmitted
through an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.3
Total IGMP Leave messages that have been transmitted through
an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.4
Total IGMP General Queries that have been received at an
interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.5
Total IGMP Group-Specific Queries that have been received at
an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.6
Total IGMP Membership Reports that have been received at an
interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.7
Total IGMP Leave messages that have been received at an
interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.8
Total valid IGMP packets have been received at an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.9
Total packets those are not valid IGMP messages received
at an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.10
Total non IGMP messages messages that have been received
at an interface, comprising cgmp join, pim hello, dvmrp
and mospf messages.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.11
Total MAC-based General Queries that have been received at
an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.12
Total Topology Change Notifications that have been received
at an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.13
Number of Source-List-Change records with the record type
ALLOW_NEW_SOURCES that have been sent from hosts connected
to an interface. This record type indicates that the Source
Address fields in this Group Record conta…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.14
Number of Source-List-Change records with the record type
BLOCK_OLD_SOURCE that have been sent from hosts connected to
an interface. This record type indicates that the Source
Address fields in this Group Record contain…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.15
Number of Current-State records with the state MODE_IS_INCLUDE
that have been sent from hosts in response to a Query received
at an interface. This state indicates that the interface has a
filter mode of INCLUDE for th…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.16
Number of Current-State records with the state MODE_IS_EXCLUDE
that have been sent from hosts in response to a Query received
at an interfaces. This state indicates that the interface has a
filter mode of EXCLUDE for th…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.17
Number of Filter-Mode-Change records with the record type
CHANGE_TO_INCLUDE_MODE that have been sent through an
interface. This type of record indicates that the filter mode
has been changed to INCLUDE mode for the spe…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.18
Number of Filter-Mode-Change records with the record type
CHANGE_TO_EXCLUDE_MODE that have been sent through an
interface. This type of record indicates that the filter mode
has been changed to EXCLUDE mode for the spe…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.2.1.1.19
.1.3.6.1.4.1.9.9.263.1.4.1 · 1 row entry · 11 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cisVlanConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IGMP-SNOOPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IGMP-SNOOPING-MIB::cisVlanConfigTable'
Table contains VLAN based configuration information
for IGMP Snooping.
cisVlanConfigEntry row .1.3.6.1.4.1.9.9.263.1.4.1.1
An entry is created for each IGMP Snooping capable VLAN
found in the device. An entry is removed if such VLAN
becomes IGMP Snooping incapable or has been removed.
Indexes
Column Syntax OID
This object indicates the VLAN in which IGMP Snooping
is configured.
CISCO-VTP-MIBVlanIndex
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.9.9.263.1.4.1.1.1
When this object is set to 'true' IGMP Snooping
is enabled on this VLAN else disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.263.1.4.1.1.2
This object specifies whether Fast-Leave mechanism
(also known as Immediate-Leave) is to be performed by IGMP
Snooping or not. When enabled, IGMP Snooping will remove
the interface from the group mentioned in the IGMP …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.263.1.4.1.1.3
The object indicates the operational mode of IGMP Snooping.
The object should return igmpOnly(2) or igmpCgmp(3) only.
CisIgmpMode
Type Values:
1auto
2igmpOnly
3igmpCgmp
.1.3.6.1.4.1.9.9.263.1.4.1.1.4
This object specifies the multicast router port learning
method for IGMP Snooping as described below:
pimDvmrp(1) : Protocol Independent Multicast / Distance Vector
Multicast Routing Protocol.
cgmp(2) …
Enumerationr/w
Enumerated Values:
1pimDvmrp
2cgmp
.1.3.6.1.4.1.9.9.263.1.4.1.1.5
This object specifies whether Report Suppression is enabled
for this VLAN.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.263.1.4.1.1.6
Specifies the IGMP Last Member Query Interval of this VLAN.

Value of zero for this object indicates that IGMP leave timer
is not configured for this VLAN. In that case, IGMP leave
timer used in this VLAN…
millisecondsUnsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.9.9.263.1.4.1.1.7
This object specifies the Last Member Query Count for this
VLAN.

Value of zero for this object indicates that Last Member
Query Count is not configured for the VLAN. In that case,
Last Member Query Count…
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.9.9.263.1.4.1.1.8
This objects specifies the Robustness Variable for this VLAN.

Value of zero for this object indicates that Robustness
Variable is not configured for the VLAN. In that case,
Robustness Variable used in thi…
Unsigned32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.9.9.263.1.4.1.1.9
This objects specifies whether TTL check is enabled on this
VLAN.

Setting this object will only take effect when
cisTimeToLiveCheckEnabled is 'true'.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.263.1.4.1.1.10
This objects specifies whether checking of Router-Alert option
is enabled for IGMP traffic in this VLAN.

Setting this object will only take effect when
cisRouterAlertCheckEnabled is 'true'.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.263.1.4.1.1.11
.1.3.6.1.4.1.9.9.263.1.4.2 · 1 row entry · 16 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cisIgmpQuerierTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IGMP-SNOOPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IGMP-SNOOPING-MIB::cisIgmpQuerierTable'
Table containing information regarding the IGMP Querier in
the VLAN.  The device can be configured to be the IGMP Querier
for the VLAN. An IGMP Querier for the VLAN is selected by 
using a Querier Election process.
cisIgmpQuerierEntry row .1.3.6.1.4.1.9.9.263.1.4.2.1
An entry is created for each IGMP Snooping capable VLAN
found in the device. An entry is removed if such VLAN
becomes IGMP Snooping incapable or has been removed.
Column Syntax OID
The object indicates the VLAN that the Querier will send
IGMP queries on.
CISCO-VTP-MIBVlanIndex
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.9.9.263.1.4.2.1.1
This object specifies whether IGMP Snooping Querier function
is enabled on the VLAN. Setting this object to 'enable' will
enable IGMP Snooping Querier function on this VLAN; Setting
this object to 'false' will disable …
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.263.1.4.2.1.2
The object indicates the current state of the device as an
IGMP Querier in a VLAN.

disabled(1) : Querier function is disabled for this device
in this VLAN.
electing(2) : The device is in …
Enumeration
Enumerated Values:
1disabled
2electing
3querier
4nonQuerier
5inactive
.1.3.6.1.4.1.9.9.263.1.4.2.1.3
The object indicates the operational IGMP version of the
Querier for the VLAN. IGMP version of the Querier is
determined by the type of IGMP General Query received by
the device.
CisIgmpVersion
Type Values:
1version1
2version2
3version3
4unknown
.1.3.6.1.4.1.9.9.263.1.4.2.1.4
The object indicates IP address type of the IGMP Querier
for the VLAN.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.263.1.4.2.1.5
The object indicates the operational IP address of the IGMP
Querier for the VLAN.
INET-ADDRESS-MIBInetAddress
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.263.1.4.2.1.6
The object indicates the interface on which IGMP Querier is
detected for the VLAN. The value of this object is zero
if the device itself is acting as IGMP Querier for the VLAN.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.9.9.263.1.4.2.1.7
Specifies the number of TCN queries to be executed upon
receiving TCN on this VLAN.

Value of zero for this object indicates that querier TCN query
count is not configured for the VLAN.
Unsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.9.9.263.1.4.2.1.8
Specifies the TCN query interval time for this VLAN.

Value of zero for this object indicates that querier
TCN query interval is not configured for the VLAN. In that
case, querier TCN query interval used …
secondsUnsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.9.9.263.1.4.2.1.9
Specifies the querier expiration timer on this VLAN.

Value of zero for this object indicates that querier
expiration timer is not configured for the VLAN. In that
case, querier expiration timer used in t…
secondsUnsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.9.9.263.1.4.2.1.10
Specifies the Max Response Time value of queries generated
by IGMP Snooping Querier on this VLAN.

Value of zero for this object indicates that querier Max
Response Time is not configured for the VLAN. In …
secondsUnsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.9.9.263.1.4.2.1.11
Specifies the interval between IGMP Queries to this VLAN.

Value of zero for this object indicates that querier
query interval is not configured for the VLAN. In that case,
querier query interval used in …
secondsUnsigned32r/w
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.9.9.263.1.4.2.1.12
Specifies the administrative IP address type of the IGMP
Querier of this VLAN.
INET-ADDRESS-MIBInetAddressTyper/w
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.263.1.4.2.1.13
Specifies the administrative Internet address of the
IGMP Querier of this VLAN, when IGMP Snooping Querier
function is enabled on this VLAN. The type of this
address is determined by the value of
cisIgmpQuerierAdminAdd…
INET-ADDRESS-MIBInetAddressr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.263.1.4.2.1.14
Specifies the administrative version of the IGMP version
that the Querier feature uses on this VLAN.

Value 'unknown' indicates that the administrative version is
not configured for IGMP Querier on this VL…
CisIgmpVersionr/w
Type Values:
1version1
2version2
3version3
4unknown
.1.3.6.1.4.1.9.9.263.1.4.2.1.15
Indicates the remaining TCN queries in respond to TCN on this
VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.4.2.1.16
.1.3.6.1.4.1.9.9.263.1.5.1 · 1 row entry · 1 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cisIfConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IGMP-SNOOPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IGMP-SNOOPING-MIB::cisIfConfigTable'
Table containing configuration information for IGMP
Snooping on capable Layer two interfaces.
cisIfConfigEntry row .1.3.6.1.4.1.9.9.263.1.5.1.1
An entry is created for each Layer two interface
capable of being flood with multicast traffic by IGMP
Snooping.
Indexes
Column Syntax OID
When this object is set to 'true' multicast traffic will be
flooded on the port for cisTopoChangeFloodQueryCount of Igmp
General Queries upon receiving a Topology Change
Notification (TCN) for the VLAN to which the por…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.263.1.5.1.1.1

cisMcastRouterCfgTable

table deprecated
.1.3.6.1.4.1.9.9.263.1.6.1 · 1 row entry · 3 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cisMcastRouterCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IGMP-SNOOPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IGMP-SNOOPING-MIB::cisMcastRouterCfgTable'
Table containing multicast router configuration information
for IGMP Snooping. This table is deprecated and replaced by
cisMcastRouterConfigTable.
cisMcastRouterCfgEntry row .1.3.6.1.4.1.9.9.263.1.6.1.1
An entry is created for each interface in the VLAN that is
either learned or configured as multicast router port.
A multicast router port is learned using the method
specified by cisVlanIgmpSnoopingLearningMode.
Column Syntax OID
This object indicates the VLAN to which the multicast router
port belongs.
CISCO-VTP-MIBVlanIndex
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.9.9.263.1.6.1.1.1
This object indicates if the multicast router port is
a configured (static) or learned (dynamic) port.
Enumeration
Enumerated Values:
1static
2dynamic
.1.3.6.1.4.1.9.9.263.1.6.1.1.2
This object is a conceptual row entry that allows to add
or delete entries to or from the cisMcastRouterCfgTable.
When creating an entry in this table 'createAndGo' method
is used and the value of this object is set to …
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.263.1.6.1.1.3
.1.3.6.1.4.1.9.9.263.1.6.2 · 1 row entry · 4 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cisMcastRouterConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IGMP-SNOOPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IGMP-SNOOPING-MIB::cisMcastRouterConfigTable'
Table containing a list of multicast router used by IGMP
snooping.  An entry is created for every multicast router
learnt by the system.  An entry can also be created
manually by user. Only entries which are manually created
can be deleted from the table.
cisMcastRouterConfigEntry row .1.3.6.1.4.1.9.9.263.1.6.2.1
A set of configuration and information regarding a single
multicast router.
Column Syntax OID
This object indicates the VLAN to which the multicast router
port belongs.
CISCO-VTP-MIBVlanIndex
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.9.9.263.1.6.2.1.1
This object indicates type of the multicast router.

static: the multicast router is configured manually.

dynamic: the multicast router is learned by the system.
Enumeration
Enumerated Values:
1static
2dynamic
.1.3.6.1.4.1.9.9.263.1.6.2.1.2
This object specifies the storage type of this conceptual
row.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
.1.3.6.1.4.1.9.9.263.1.6.2.1.3
This object is used to manage creation, deletion and
modification of rows in this table.

Once a row becomes active, value in any column within
such row can not be modified.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.263.1.6.2.1.4

cisMcastGroupTable

table deprecated
.1.3.6.1.4.1.9.9.263.1.7.1 · 1 row entry · 8 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cisMcastGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IGMP-SNOOPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IGMP-SNOOPING-MIB::cisMcastGroupTable'
Table containing multicast group address information for
IGMP Snooping.
cisMcastGroupEntry row .1.3.6.1.4.1.9.9.263.1.7.1.1
An entry is created by IGMP Snooping for each group learned
in the VLAN.
Column Syntax OID
This object indicates the VLAN in which the group is learned.
CISCO-VTP-MIBVlanIndex
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.9.9.263.1.7.1.1.1
This object indicates IP multicast address type learned
by IGMP Snooping.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.263.1.7.1.1.2
This object indicates IP multicast address learned by
IGMP Snooping.
OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.9.9.263.1.7.1.1.3
This object indicates the IGMP filter mode for this group.

include(1) : reception of multicast packets sent to the group
specified by cisMcastGroupAddress is requested
only from …
Enumeration
Enumerated Values:
1include
2exclude
.1.3.6.1.4.1.9.9.263.1.7.1.1.4
This object indicates the IGMP version for the group.
This is determined by the type of IGMP Membership Report
received by the device.
CisIgmpVersion
Type Values:
1version1
2version2
3version3
4unknown
.1.3.6.1.4.1.9.9.263.1.7.1.1.5
This object indicates the number of hosts that
are in INCLUDE mode for the group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.7.1.1.6
This object indicates the number of hosts that
are in EXCLUDE mode for the group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.7.1.1.7
This object indicates the set of ports on which IGMP
Membership Reports are received for the group indicating
interest to receive traffic sent to the group.
CISCO-TCCiscoPortList
Type Constraints:
range: 0..256
.1.3.6.1.4.1.9.9.263.1.7.1.1.8
.1.3.6.1.4.1.9.9.263.1.7.2 · 1 row entry · 11 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cisMulticastGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IGMP-SNOOPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IGMP-SNOOPING-MIB::cisMulticastGroupTable'
Table containing a list of multicast group information for
IGMP Snooping.
cisMulticastGroupEntry row .1.3.6.1.4.1.9.9.263.1.7.2.1
An entry of multicast group in the system. An entry is created
for each group learned or configured in the system.
Column Syntax OID
This object indicates the VLAN in which the group is
learned or configured.
CISCO-VTP-MIBVlanIndex
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.9.9.263.1.7.2.1.1
This object indicates the Customer Equipment (CE) VLAN in
which the group is learned or configured.
CISCO-VTP-MIBVlanIndex
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.9.9.263.1.7.2.1.2
This object indicates the type of Internet address of
the multicast group and source in this entry.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.263.1.7.2.1.3
This object indicates IP multicast address of the group. Type
of this address is indicated by cisMulticastGroupAddressType.
OctetString
Constraints:
range: 1-48
.1.3.6.1.4.1.9.9.263.1.7.2.1.4
This object indicates IP address of the source of the multicast
traffic. Value of zero for this object indicates that the
multicast traffic of the group indicated by the corresponding
instance of cisMulticastGroupAddres…
OctetString
Constraints:
range: 1-48
.1.3.6.1.4.1.9.9.263.1.7.2.1.5
This object indicates whether this multicast group is learned
or manually configured on the device.

dynamic(1): this multicast group is learned from multicast
traffic on this VLAN.
static(2) : …
Enumeration
Enumerated Values:
1dynamic
2static
.1.3.6.1.4.1.9.9.263.1.7.2.1.6
This object indicates the versions of IGMP packets received
from this group.
Bits
Enumerated Values:
0igmpV1
1igmpV2
2igmpV3
.1.3.6.1.4.1.9.9.263.1.7.2.1.7
This object indicates the time (in seconds) since this source
started sending multicast data for the multicast group.
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.7.2.1.8
This object indicates the time (in seconds) the association of
this source and the multicast group will be expired, if there is
no host interests in receiving multicast data from it.

This object has the v…
secondsSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.7.2.1.9
This object indicates the number of hosts that are in
INCLUDE mode for the group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.7.2.1.10
This object indicates the number of hosts that are in
EXCLUDE mode for the group.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.7.2.1.11
.1.3.6.1.4.1.9.9.263.1.7.3 · 1 row entry · 2 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cisMulticastGroupPortListTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IGMP-SNOOPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IGMP-SNOOPING-MIB::cisMulticastGroupPortListTable'
Table containing a list of ports joining multicast groups.
cisMulticastGroupPortListEntry row .1.3.6.1.4.1.9.9.263.1.7.3.1
An entry containing a list of ports joining a multicast group.
Column Syntax OID
This object indicates the bridge-port range of this row.
CISCO-TCCiscoPortListRange
Type Values:
1oneto2k
2twoKto4K
3fourKto6K
4sixKto8K
5eightKto10K
6tenKto12K
7twelveKto14K
8fourteenKto16K
.1.3.6.1.4.1.9.9.263.1.7.3.1.1
The set of ports that joining a multicast group. It has
the information of up to 2k ports with the port number
starting from the information indicated in
cisMcastPortRangeIndex object of the same row. For example,
if …
CISCO-TCCiscoPortList
Type Constraints:
range: 0..256
.1.3.6.1.4.1.9.9.263.1.7.3.1.2
.1.3.6.1.4.1.9.9.263.1.7.4 · 1 row entry · 9 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cisMulticastGroupConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IGMP-SNOOPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IGMP-SNOOPING-MIB::cisMulticastGroupConfigTable'
A list of configured multicast group and associated ports
in the system.
cisMulticastGroupConfigEntry row .1.3.6.1.4.1.9.9.263.1.7.4.1
An entry of multicast group and its associated ports, which
is configured manually.
Column Syntax OID
This object specifies the VLAN in which the group is
configured.
CISCO-VTP-MIBVlanIndex
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.9.9.263.1.7.4.1.1
This object specifies the Customer Equipment (CE) VLAN in
which the group is configured.
CISCO-VTP-MIBVlanIndex
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.9.9.263.1.7.4.1.2
This object specifies the type of Internet address of
multicast group and source in this entry.
INET-ADDRESS-MIBInetAddressType
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
.1.3.6.1.4.1.9.9.263.1.7.4.1.3
This object specifies IP address of the multicast group.
Type of this address is indicated by
cisMulticastGroupConfAddressType.
OctetString
Constraints:
range: 1-48
.1.3.6.1.4.1.9.9.263.1.7.4.1.4
This object specifies the IP address of the source of the
multicast traffic for this group. Value of zero for this
object indicates that the multicast traffic of this group can
come from any source. Type of this address…
OctetString
Constraints:
range: 1-48
.1.3.6.1.4.1.9.9.263.1.7.4.1.5
This object specifies the bridge-port range of this row..
CISCO-TCCiscoPortListRange
Type Values:
1oneto2k
2twoKto4K
3fourKto6K
4sixKto8K
5eightKto10K
6tenKto12K
7twelveKto14K
8fourteenKto16K
.1.3.6.1.4.1.9.9.263.1.7.4.1.6
The set of ports that are configured to join a multicast
group. It has the information of up to 2k ports with the
port number starting from the information indicated in
cisMcastPortRangeIndex object of the same row. Fo…
CISCO-TCCiscoPortListr/w
Type Constraints:
range: 0..256
.1.3.6.1.4.1.9.9.263.1.7.4.1.7
This object specifies the storage type of this conceptual
row.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
.1.3.6.1.4.1.9.9.263.1.7.4.1.8
This object is used to manage creation, deletion and
modification of rows in this table.

Once a row becomes active, value in any column within
such row can not be modified.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.263.1.7.4.1.9
.1.3.6.1.4.1.9.9.263.1.10.1 · 1 row entry · 5 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cisIfLimitTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IGMP-SNOOPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IGMP-SNOOPING-MIB::cisIfLimitTable'
Table containing a list of IGMP Snooping limit filters.
cisIfLimitEntry row .1.3.6.1.4.1.9.9.263.1.10.1.1
Entry containing IGMP Snooping limit filters. A limit
filter can be applied on a Layer2 interface, and VLAN(s) carried
by the interface when it is in trunk mode.
Column Syntax OID
Specifies the VLAN which IGMP Snooping filters configured in
this entry will be applied on when the interface is in trunk
mode. Value of zero indicates that the corresponding filters
are applicable to every VLAN carried…
CISCO-PRIVATE-VLAN-MIBVlanIndexOrZero
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.9.9.263.1.10.1.1.1
Specifies the maximum number of IGMP group and channels that
allowed on the interaface, or VLAN(s) carried by the interface
if it is in trunk mode.
Unsigned32r/w
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.9.9.263.1.10.1.1.2
Specifies the access group that is excluded from the filter
configured via cisIfLimitMax.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.263.1.10.1.1.3
Specifies the storage type of this conceptual row.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
.1.3.6.1.4.1.9.9.263.1.10.1.1.4
This object is used to manage creation, deletion and
modification of rows in this table.

All writable objects in this row may be modified at any time.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.263.1.10.1.1.5
.1.3.6.1.4.1.9.9.263.1.10.2 · 1 row entry · 4 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cisIfLimitTotalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IGMP-SNOOPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IGMP-SNOOPING-MIB::cisIfLimitTotalTable'
Table containing a list of IGMP Snooping total limit
filters.
cisIfLimitTotalEntry row .1.3.6.1.4.1.9.9.263.1.10.2.1
Entry containing IGMP Snooping total limit filters for a
Layer 2 interface.
Indexes
Column Syntax OID
Specifies the maximum total number of IGMP group or channels
that allows on all VLANs carried by the interaface when it is
in trunk mode.
Unsigned32r/w
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.9.9.263.1.10.2.1.1
Specifies the access group that is excluded from the
limitation specified by cisIfToltalLimitChannelsAllowed.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.263.1.10.2.1.2
Specifies the storage type of this conceptual row.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
.1.3.6.1.4.1.9.9.263.1.10.2.1.3
This object is used to manage creation, deletion and
modification of rows in this table.

All writable objects in this row may be modified at any time.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.263.1.10.2.1.4
.1.3.6.1.4.1.9.9.263.1.10.3 · 1 row entry · 4 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cisIfAccessGroupTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IGMP-SNOOPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IGMP-SNOOPING-MIB::cisIfAccessGroupTable'
Table containing a list of IGMP Snooping filters based on
access-group.
cisIfAccessGroupEntry row .1.3.6.1.4.1.9.9.263.1.10.3.1
An IGMP Snooping access-group filter, containing an access
control list describing which IGMP groups or channels can be
joined on the interface, and/or on which specific VLAN(s) the
filter should be applied when the int…
Column Syntax OID
Specifies the VLAN which IGMP Snooping filters configured in
this entry will be applied on when the interface is in trunk
mode. Value of zero indicates that the corresponding filters
are applicable to every VLAN carrie…
CISCO-PRIVATE-VLAN-MIBVlanIndexOrZero
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.9.9.263.1.10.3.1.1
Specifies the access group to indicate which IGMP groups or
channels can be joined.
OctetStringr/w
Constraints:
range: 1-255
.1.3.6.1.4.1.9.9.263.1.10.3.1.2
Specifies the storage type of this conceptual row.
SNMPv2-TCStorageTyper/w
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
.1.3.6.1.4.1.9.9.263.1.10.3.1.3
This object is used to manage creation, deletion and
modification of rows in this table.

Once a row becomes active, value in any column within
such row can not be modified.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.9.9.263.1.10.3.1.4
.1.3.6.1.4.1.9.9.263.1.10.4 · 1 row entry · 4 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cisVlanFilterConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IGMP-SNOOPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IGMP-SNOOPING-MIB::cisVlanFilterConfigTable'
Table containing a list of VLAN. An entry will exist for
each VLAN which supports IGMP Snooping feature.
cisVlanFilterConfigEntry row .1.3.6.1.4.1.9.9.263.1.10.4.1
Entry containing IGMP Snooping filters configuration for
a particular VLAN.
Indexes
Column Syntax OID
Specifies the access group to control which IGMP group or
channels can be joined on this VLAN.

A zero length string of this instance indicates that there is
no access-group based filter applied to this VL…
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.263.1.10.4.1.1
Specifies the maximum number of IGMP groups or channels that
allows on each switch port in this VLAN, or trunk ports
carrying this VLAN.

Value of zero indicates that there is no limit of number of IGMP
gr…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.10.4.1.2
Specifies the access group that is excluded from the filter
configured via cisVlanFilterLimitMax.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.263.1.10.4.1.3
Specifies the minimum version of IGMP hosts allowed on this
VLAN.

Value 'unknown' is not configurable for this object.
CisIgmpVersionr/w
Type Values:
1version1
2version2
3version3
4unknown
.1.3.6.1.4.1.9.9.263.1.10.4.1.4
.1.3.6.1.4.1.9.9.263.1.10.5 · 1 row entry · 5 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cisFilterStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IGMP-SNOOPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IGMP-SNOOPING-MIB::cisFilterStatsTable'
A table containing statistics information about IGMP Snooping
filters in the system. An entry is created for each IGMP
Snooping capable interface in the system, or each VLAN carried
by an interface when it is in trunk mode.
cisFilterStatsEntry row .1.3.6.1.4.1.9.9.263.1.10.5.1
An entry providing statistic information about IGMP Snooping
filter on an IGMP Snooping capable interface, or on a VLAN that
the interface carries when it is in trunk mode.
Column Syntax OID
Indicates the VLAN which the entry provides statistics
information for, when the interface is in trunk mode.
Value of zero indicates that statistics information provided
in this entry is for the interface that is in acc…
CISCO-PRIVATE-VLAN-MIBVlanIndexOrZero
Type Constraints:
range: 0..4095
.1.3.6.1.4.1.9.9.263.1.10.5.1.1
Indicates the number of join-request denied due to
Access-Group filter on the interface, or on the VLAN
indicated by the value of cisFilterStatsVlanNumber when
the interface is in trunk mode.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.10.5.1.2
Indicates the number of join-request denied due to exceeding
the maximum number of IGMP groups or channels allowed on the
interface, or on the VLAN indicated by the value of
cisFilterStatsVlanNumber when the interface i…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.10.5.1.3
Indicates the number of join-request denied due to exceeding
the maximum number of IGMP groups or channels across
all VLANs on the interface, when it is in trunk mode.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.10.5.1.4
Indicates the number of join-request denied due to originating
from hosts with lower than minimum required IGMP version on the
interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.263.1.10.5.1.5
.1.3.6.1.4.1.9.9.263.1.11.1 · 1 row entry · 2 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cisVlanExplicitTrackingTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IGMP-SNOOPING-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IGMP-SNOOPING-MIB::cisVlanExplicitTrackingTable'
Table containing configuration information of Explicit Tracking
for IGMP in the system.  Explicit Tracking allows the device to
track the IGMP membership status of all hosts in the system that
respond to IGMP Membership Queries.  Tracking information is
used to build the explicit-tracking database to serve for
fast-leave processing for IGMPv3 hosts, proxy reporting and
statistic collection.
          
An entry is created for each IGMP Snooping capable VLAN found in
the device.
cisVlanExplicitTrackingEntry row .1.3.6.1.4.1.9.9.263.1.11.1.1
An entry of Explicit Tracking configuration for a corresponding
VLAN.
Indexes
Column Syntax OID
This object specifies whether Explicit Tracking is enabled
on this VLAN.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.9.9.263.1.11.1.1.1
This object specifies the maximum number of entries that can
be installed in the explicit-tracking database for this VLAN.

Value of zero for this object indicates that tracking
information for this VLAN w…
Integer32r/w
Constraints:
range: 2147483647-2147483647
range: -1-0
.1.3.6.1.4.1.9.9.263.1.11.1.1.2