cieIfDhcpMode

CISCO-IF-EXTENSION-MIB · .1.3.6.1.4.1.9.9.276.1.1.2.1.6
Commands MIB view Table view

Object

column r/w SNMPv2-TCTruthValue 
The DHCP mode configured by the
administrator.
If 'true' the DHCP is enabled. In which
case an IP address is requested in DHCP.
This is in addition to any that are 
configured by the administrator in
'ciiIPAddressTable' or 'ciiIPIfAddressTable'
in CISCO-IP-IF-MIB.
If 'false' the DHCP is disabled. In which
case all IP addresses are configured by the
administrator in 'ciiIPAddressTable' or 
'ciiIPIfAddressTable'.
For interfaces, for which DHCP cannot be or
is not supported, then this object has the
value 'false'.

Context

MIB
CISCO-IF-EXTENSION-MIB
OID
.1.3.6.1.4.1.9.9.276.1.1.2.1.6
Type
column
Access
readwrite
Status
current
Parent
cieIfInterfaceEntry
Groups
3

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IF-EXTENSION-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IF-EXTENSION-MIB::cieIfDhcpMode'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'CISCO-IF-EXTENSION-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IF-EXTENSION-MIB::cieIfDhcpMode.<ifIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IF-EXTENSION-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IF-EXTENSION-MIB::cieIfDhcpMode'

Syntax

SNMPv2-TCTruthValue
Source
SNMPv2-TCTruthValue
Base type
Enumeration
Type Description
Represents a boolean value.

Values & Constraints

Type Values
1true
2false

Conformance

Member of
ciscoIfExtensionTableIntfGroup1 ciscoIfExtensionTableIntfGroup2 ciscoIfExtensionTableIntfGroup3
Compliance refinements
ciscoIfExtensionMIBCompliance1 readonly SNMPv2-TC::TruthValue
Values: false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only required
on interfaces which support DHCP.
ciscoIfExtensionMIBCompliance10 readonly SNMPv2-TC::TruthValue
Values: false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
ciscoIfExtensionMIBCompliance11 readonly SNMPv2-TC::TruthValue
Values: false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
ciscoIfExtensionMIBCompliance12 readonly SNMPv2-TC::TruthValue
Values: false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
ciscoIfExtensionMIBCompliance13 readonly SNMPv2-TC::TruthValue
Values: false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
ciscoIfExtensionMIBCompliance14 readonly SNMPv2-TC::TruthValue
Values: false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
ciscoIfExtensionMIBCompliance15 readonly SNMPv2-TC::TruthValue
Values: false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
ciscoIfExtensionMIBCompliance2 readonly SNMPv2-TC::TruthValue
Values: false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only required
on interfaces which support DHCP.
ciscoIfExtensionMIBCompliance3 readonly SNMPv2-TC::TruthValue
Values: false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only required
on interfaces which support DHCP.
ciscoIfExtensionMIBCompliance4 readonly SNMPv2-TC::TruthValue
Values: false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only required
on interfaces which support DHCP.
ciscoIfExtensionMIBCompliance5 readonly SNMPv2-TC::TruthValue
Values: false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
ciscoIfExtensionMIBCompliance6 readonly SNMPv2-TC::TruthValue
Values: false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
ciscoIfExtensionMIBCompliance7 readonly SNMPv2-TC::TruthValue
Values: false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
ciscoIfExtensionMIBCompliance8 readonly SNMPv2-TC::TruthValue
Values: false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
ciscoIfExtensionMIBCompliance9 readonly SNMPv2-TC::TruthValue
Values: false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.