CISCO-IF-EXTENSION-MIB

        A MIB module for extending the IF-MIB (RFC2863)
to add objects which provide additional information
about interfaces not available in other MIBS.
This MIB replaces the OLD-CISCO-INTERFACES-MIB.
        
GLOSSARY :
        
Virtual Switch - A physical switch partitioned into 
        multiple logical switches.
        
Interface Sharing - An interface can be shared among 
        multiple virtual switches.
        
Speed Group - An interface is capable of operating in any one of
the speed range depending on the capability of the hardware.
        
Virtual Link (VL) - Virtual Link is a logical connectivity 
    between two end points. A physical interface can 
    have multiple Virtual Links.
        
No Drop Virtual Link - According to 802.3 standard, 
    No drop specifies lossless service on a virtual link.
        
Drop Virtual Link - According to 802.3 standard,
    Traffic drop may occur on this virtual Link.
    
Source file
CISCO-IF-EXTENSION-MIB
Last revised
Identity
ciscoIfExtensionMIB
Base OID
1.3.6.1.4.1.9.9.276
Imported Objects
CISCO-SMI ciscoMgmt
CISCO-TC IfOperStatusReason
ENTITY-MIB entPhysicalIndex
IF-MIB ifAdminStatus ifIndex ifName ifOperStatus ifType InterfaceIndexOrZero
SNMP-FRAMEWORK-MIB SnmpAdminString
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Counter64 Gauge32 Integer32 MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC DisplayString TEXTUAL-CONVENTION (no object page) TimeStamp TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-IF-EXTENSION-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-IF-EXTENSION-MIB::ciscoIfExtensionMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-IF-EXTENSION-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-IF-EXTENSION-MIB::ciscoIfExtensionMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (96)
.1.3.6.1.4.1.9.9.276
.1.3.6.1.4.1.9.9.276.0
.1.3.6.1.4.1.9.9.276.1
.1.3.6.1.4.1.9.9.276.1.1
.1.3.6.1.4.1.9.9.276.1.1.1
.1.3.6.1.4.1.9.9.276.1.1.1.1
millisecondsSNMPv2-SMIGauge32
.1.3.6.1.4.1.9.9.276.1.1.1.1.1
.1.3.6.1.4.1.9.9.276.1.1.1.1.10
.1.3.6.1.4.1.9.9.276.1.1.1.1.11
.1.3.6.1.4.1.9.9.276.1.1.1.1.12
millisecondsSNMPv2-SMIGauge32
.1.3.6.1.4.1.9.9.276.1.1.1.1.2
millisecondsSNMPv2-SMIGauge32
.1.3.6.1.4.1.9.9.276.1.1.1.1.3
.1.3.6.1.4.1.9.9.276.1.1.1.1.4
.1.3.6.1.4.1.9.9.276.1.1.1.1.5
.1.3.6.1.4.1.9.9.276.1.1.1.1.6
.1.3.6.1.4.1.9.9.276.1.1.1.1.7
.1.3.6.1.4.1.9.9.276.1.1.1.1.8
.1.3.6.1.4.1.9.9.276.1.1.1.1.9
.1.3.6.1.4.1.9.9.276.1.1.2
.1.3.6.1.4.1.9.9.276.1.1.2.1
.1.3.6.1.4.1.9.9.276.1.1.2.1.1
.1.3.6.1.4.1.9.9.276.1.1.2.1.10
.1.3.6.1.4.1.9.9.276.1.1.2.1.11
.1.3.6.1.4.1.9.9.276.1.1.2.1.12
OctetString
.1.3.6.1.4.1.9.9.276.1.1.2.1.13
Enumeration
.1.3.6.1.4.1.9.9.276.1.1.2.1.14
Enumeration
.1.3.6.1.4.1.9.9.276.1.1.2.1.15
Enumeration
.1.3.6.1.4.1.9.9.276.1.1.2.1.16
Enumeration
.1.3.6.1.4.1.9.9.276.1.1.2.1.17
.1.3.6.1.4.1.9.9.276.1.1.2.1.18
.1.3.6.1.4.1.9.9.276.1.1.2.1.19
.1.3.6.1.4.1.9.9.276.1.1.2.1.2
Enumeration
.1.3.6.1.4.1.9.9.276.1.1.2.1.20
Enumeration
.1.3.6.1.4.1.9.9.276.1.1.2.1.21
.1.3.6.1.4.1.9.9.276.1.1.2.1.3
.1.3.6.1.4.1.9.9.276.1.1.2.1.4
.1.3.6.1.4.1.9.9.276.1.1.2.1.5
.1.3.6.1.4.1.9.9.276.1.1.2.1.6
cieIfMtu r/w
Integer32
.1.3.6.1.4.1.9.9.276.1.1.2.1.7
OctetString
.1.3.6.1.4.1.9.9.276.1.1.2.1.8
.1.3.6.1.4.1.9.9.276.1.1.2.1.9
.1.3.6.1.4.1.9.9.276.1.1.3
.1.3.6.1.4.1.9.9.276.1.1.3.1
Unsigned32
.1.3.6.1.4.1.9.9.276.1.1.3.1.1
.1.3.6.1.4.1.9.9.276.1.1.3.1.2
.1.3.6.1.4.1.9.9.276.1.1.3.1.3
.1.3.6.1.4.1.9.9.276.1.1.3.1.4
.1.3.6.1.4.1.9.9.276.1.1.3.1.5
.1.3.6.1.4.1.9.9.276.1.1.4
.1.3.6.1.4.1.9.9.276.1.1.4.1
.1.3.6.1.4.1.9.9.276.1.1.4.1.1
.1.3.6.1.4.1.9.9.276.1.1.4.1.2
.1.3.6.1.4.1.9.9.276.1.1.4.1.3
.1.3.6.1.4.1.9.9.276.1.1.4.1.4
.1.3.6.1.4.1.9.9.276.1.1.4.1.5
.1.3.6.1.4.1.9.9.276.1.1.4.1.6
.1.3.6.1.4.1.9.9.276.1.1.4.1.7
.1.3.6.1.4.1.9.9.276.1.1.4.1.8
.1.3.6.1.4.1.9.9.276.1.2
.1.3.6.1.4.1.9.9.276.1.2.1
cieLinkUpDownEnable deprecated r/w
Bits
.1.3.6.1.4.1.9.9.276.1.2.2
Enumeration
.1.3.6.1.4.1.9.9.276.1.2.3
cieIfIndexPersistence deprecated r/w
.1.3.6.1.4.1.9.9.276.1.2.4
.1.3.6.1.4.1.9.9.276.1.2.5
.1.3.6.1.4.1.9.9.276.1.2.5.1
.1.3.6.1.4.1.9.9.276.1.2.5.1.1
.1.3.6.1.4.1.9.9.276.1.2.5.1.2
.1.3.6.1.4.1.9.9.276.1.2.6
minutesUnsigned32
.1.3.6.1.4.1.9.9.276.1.2.7
.1.3.6.1.4.1.9.9.276.1.2.8
Bits
.1.3.6.1.4.1.9.9.276.1.2.9
.1.3.6.1.4.1.9.9.276.1.3
.1.3.6.1.4.1.9.9.276.1.3.1
.1.3.6.1.4.1.9.9.276.1.3.1.1
Integer32
.1.3.6.1.4.1.9.9.276.1.3.1.1.1
Integer32
.1.3.6.1.4.1.9.9.276.1.3.1.1.2
.1.3.6.1.4.1.9.9.276.1.4
.1.3.6.1.4.1.9.9.276.1.4.1
.1.3.6.1.4.1.9.9.276.1.4.1.1
packets per secondSNMPv2-SMICounter64
.1.3.6.1.4.1.9.9.276.1.4.1.1.1
octets per secondSNMPv2-SMICounter64
.1.3.6.1.4.1.9.9.276.1.4.1.1.2
packets per secondSNMPv2-SMICounter64
.1.3.6.1.4.1.9.9.276.1.4.1.1.3
octets per secondSNMPv2-SMICounter64
.1.3.6.1.4.1.9.9.276.1.4.1.1.4
secondsUnsigned32
.1.3.6.1.4.1.9.9.276.1.4.1.1.5
.1.3.6.1.4.1.9.9.276.1.5
.1.3.6.1.4.1.9.9.276.1.5.1
.1.3.6.1.4.1.9.9.276.1.5.1.1
Integer32
.1.3.6.1.4.1.9.9.276.1.5.1.1.1
.1.3.6.1.4.1.9.9.276.1.6
.1.3.6.1.4.1.9.9.276.1.6.1
.1.3.6.1.4.1.9.9.276.1.6.1.1
OctetString
.1.3.6.1.4.1.9.9.276.1.6.1.1.1
.1.3.6.1.4.1.9.9.276.1.6.1.1.2
.1.3.6.1.4.1.9.9.276.2
.1.3.6.1.4.1.9.9.276.2.1
.1.3.6.1.4.1.9.9.276.2.2
Dependencies (12) 8 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (5)
Enumeration
disable(1)
enable(2)
global(3)
OctetString range: 0..256
OctetString range: 0..128
OctetString range: 0..64
OctetString range: 0..8
Conformance Groups (24)
A collection of objects containing packet
statistics for a given interface.
.1.3.6.1.4.1.9.9.276.2.2.1
A collection of objects containing
information about properties of
interfaces.
.1.3.6.1.4.1.9.9.276.2.2.2
A collection of objects containing
information about properties of
interfaces.
.1.3.6.1.4.1.9.9.276.2.2.3
A collection of objects providing
global system-wise information about
interfaces.
.1.3.6.1.4.1.9.9.276.2.2.4
A collection of objects providing
the information about 802.1q
custom EtherType on the
interface.
.1.3.6.1.4.1.9.9.276.2.2.5
A collection of objects containing
information about utilization rates of
interfaces.
.1.3.6.1.4.1.9.9.276.2.2.6
A collection of objects containing
mapping information about the ifIndex values
of interfaces and their dot1dBasePort
values.
.1.3.6.1.4.1.9.9.276.2.2.7
A collection of objects for the
'ifName' to 'ifIndex' mapping.
.1.3.6.1.4.1.9.9.276.2.2.8
A collection of objects containing
information about properties of
interfaces.
.1.3.6.1.4.1.9.9.276.2.2.9
A collection of objects containing
information about set of interfaces.
.1.3.6.1.4.1.9.9.276.2.2.10
A collection of objects to control
'cieLinkUp/cieLinkDown' and standard mib-II
defined 'linkUp/linkDown' notifications.
.1.3.6.1.4.1.9.9.276.2.2.11
A collection of cisco specific linkUp and
linkDown notifications.
.1.3.6.1.4.1.9.9.276.2.2.12
An optional group used to provide information on asymmetrical
interface speeds.
.1.3.6.1.4.1.9.9.276.2.2.13
A collection of objects containing
information about calculation interval for
utilization rate on interfaces.
.1.3.6.1.4.1.9.9.276.2.2.14
A collection of objects containing information about ifIndex
Persistence of interfaces.

Since cieIfIndexPersistence and cieIfIndexPersistenceEnabled are
deprecated, so, cieIfIndexPersistenceGroup containing these two
objects are deprecated by cieIfIndexPersistenceControlGroup.
.1.3.6.1.4.1.9.9.276.2.2.15
The group of objects that help configure the
cieDelayedLinkUpDownNotif on the system.
.1.3.6.1.4.1.9.9.276.2.2.16
A collection for cisco specific delayed trap notifications.
.1.3.6.1.4.1.9.9.276.2.2.17
A collection of objects containing information about ifIndex
Persistence of interfaces.
.1.3.6.1.4.1.9.9.276.2.2.18
A collection of objects containing
information about properties of
interfaces.
.1.3.6.1.4.1.9.9.276.2.2.19
Additional objects containing information about a
set of interfaces.
.1.3.6.1.4.1.9.9.276.2.2.20
Objects containing information about a
VL (Virtual Link) statistics on an interface.
.1.3.6.1.4.1.9.9.276.2.2.21
This group is supplement to ciscoIfExtensionTableIntfGroup3.
.1.3.6.1.4.1.9.9.276.2.2.22
A collection of objects to control
'cieLinkUp/cieLinkDown' and standard mib-II
defined 'linkUp/linkDown' notifications.
.1.3.6.1.4.1.9.9.276.2.2.23
This group is supplement to ciscoIfExtensionTableIntfGroup3SupR01.
.1.3.6.1.4.1.9.9.276.2.2.24
Compliance Statements (16)

OID .1.3.6.1.4.1.9.9.276.2.1.1
The compliance statement for entities which
implement the CISCO-IF-EXTENSION-MIB.
Required groups

OID .1.3.6.1.4.1.9.9.276.2.1.2
The compliance statement for entities which
implement the CISCO-IF-EXTENSION-MIB.
Required groups
optional ciscoIfExtensionTablePacketGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup1 Implementation of this group is optional.
optional ciscoIfExtensionSystemGroup Implementation of this group is optional.
optional ciscoIfExtDot1qEtherTypeGroup Implementation of this group is optional.
Object refinements
ObjectAccessSyntaxDescription
cieIfDhcpMode readonly
false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only required
on interfaces which support DHCP.
cieIfMtu readonly
It is compliant to implement this object as
read-only.

OID .1.3.6.1.4.1.9.9.276.2.1.3
The compliance statement for entities which
implement the CISCO-IF-EXTENSION-MIB.
Required groups
optional ciscoIfExtensionTablePacketGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup1 Implementation of this group is optional.
optional ciscoIfExtensionSystemGroup Implementation of this group is optional.
optional ciscoIfExtDot1qEtherTypeGroup Implementation of this group is optional.
optional ciscoIfExtUtilizationGroup Implementation of this group is optional.
optional ciscoIfExtDot1dBaseMappingGroup Implementation of this group is optional.
Object refinements
ObjectAccessSyntaxDescription
cieIfDhcpMode readonly
false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only required
on interfaces which support DHCP.
cieIfMtu readonly
It is compliant to implement this object as
read-only.

OID .1.3.6.1.4.1.9.9.276.2.1.4
The compliance statement for entities which
implement the CISCO-IF-EXTENSION-MIB.
Required groups
optional ciscoIfExtensionTablePacketGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup1 Implementation of this group is optional.
optional ciscoIfExtensionSystemGroup Implementation of this group is optional.
optional ciscoIfExtDot1qEtherTypeGroup Implementation of this group is optional.
optional ciscoIfExtUtilizationGroup Implementation of this group is optional.
optional ciscoIfExtDot1dBaseMappingGroup Implementation of this group is optional.
optional ciscoIfExtIfNameMappingGroup Implementation of this group is optional.
Object refinements
ObjectAccessSyntaxDescription
cieIfDhcpMode readonly
false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only required
on interfaces which support DHCP.
cieIfMtu readonly
It is compliant to implement this object as
read-only.

OID .1.3.6.1.4.1.9.9.276.2.1.5
The compliance statement for entities which
implement the CISCO-IF-EXTENSION-MIB.
Required groups
optional ciscoIfExtensionTablePacketGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup2 Implementation of this group is optional.
optional ciscoIfExtensionSystemGroup Implementation of this group is optional.
optional ciscoIfExtDot1qEtherTypeGroup Implementation of this group is optional.
optional ciscoIfExtUtilizationGroup Implementation of this group is optional.
optional ciscoIfExtDot1dBaseMappingGroup Implementation of this group is optional.
optional ciscoIfExtIfNameMappingGroup Implementation of this group is optional.
optional cieIfStatusListGroup Implementation of this group is optional.
Object refinements
ObjectAccessSyntaxDescription
cieIfDhcpMode readonly
false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only required
on interfaces which support DHCP.
cieIfMtu readonly
It is compliant to implement this object as
read-only.

OID .1.3.6.1.4.1.9.9.276.2.1.6
The compliance statement for entities which
implement the CISCO-IF-EXTENSION-MIB.
Required groups
optional ciscoIfExtensionTablePacketGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup2 Implementation of this group is optional.
optional ciscoIfExtensionSystemGroup Implementation of this group is optional.
optional ciscoIfExtDot1qEtherTypeGroup Implementation of this group is optional.
optional ciscoIfExtUtilizationGroup Implementation of this group is optional.
optional ciscoIfExtDot1dBaseMappingGroup Implementation of this group is optional.
optional ciscoIfExtIfNameMappingGroup Implementation of this group is optional.
optional cieIfStatusListGroup Implementation of this group is optional.
optional cieLinkUpDownNotifEnableGroup Implementation of this group is optional.
optional cieLinkUpDownNotifGroup Implementation of this group is optional.
Object refinements
ObjectAccessSyntaxDescription
cieIfDhcpMode readonly
false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
cieIfMtu readonly
It is compliant to implement this object as
read-only.

OID .1.3.6.1.4.1.9.9.276.2.1.7
The compliance statement for entities which
implement the CISCO-IF-EXTENSION-MIB.
Required groups
optional ciscoIfExtensionTablePacketGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup2 Implementation of this group is optional.
optional ciscoIfExtensionSystemGroup Implementation of this group is optional.
optional ciscoIfExtDot1qEtherTypeGroup Implementation of this group is optional.
optional ciscoIfExtUtilizationGroup Implementation of this group is optional.
optional ciscoIfExtDot1dBaseMappingGroup Implementation of this group is optional.
optional ciscoIfExtIfNameMappingGroup Implementation of this group is optional.
optional cieIfStatusListGroup Implementation of this group is optional.
optional cieLinkUpDownNotifEnableGroup Implementation of this group is optional.
optional cieLinkUpDownNotifGroup Implementation of this group is optional.
optional ciscoIfExtensionAsymmetricalSpeedGroup Implementation of this group is optional.
Object refinements
ObjectAccessSyntaxDescription
cieIfDhcpMode readonly
false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
cieIfMtu readonly
It is compliant to implement this object as
read-only.

OID .1.3.6.1.4.1.9.9.276.2.1.8
The compliance statement for entities which
implement the CISCO-IF-EXTENSION-MIB.
Required groups
optional ciscoIfExtensionTablePacketGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup2 Implementation of this group is optional.
optional ciscoIfExtensionSystemGroup Implementation of this group is optional.
optional ciscoIfExtDot1qEtherTypeGroup Implementation of this group is optional.
optional ciscoIfExtUtilizationGroup Implementation of this group is optional.
optional ciscoIfExtDot1dBaseMappingGroup Implementation of this group is optional.
optional ciscoIfExtIfNameMappingGroup Implementation of this group is optional.
optional cieIfStatusListGroup Implementation of this group is optional.
optional cieLinkUpDownNotifEnableGroup Implementation of this group is optional.
optional cieLinkUpDownNotifGroup Implementation of this group is optional.
optional ciscoIfExtensionAsymmetricalSpeedGroup Implementation of this group is optional.
optional ciscoIfExtUtilIntervalGroup Implementation of this group is mandatory for those
platforms which provide the information of calculation
interval for utilization rate on interfaces.
Object refinements
ObjectAccessSyntaxDescription
cieIfDhcpMode readonly
false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
cieIfMtu readonly
It is compliant to implement this object as
read-only.

OID .1.3.6.1.4.1.9.9.276.2.1.9
The compliance statement for entities which
implement the CISCO-IF-EXTENSION-MIB.
Required groups
optional ciscoIfExtensionTablePacketGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup2 Implementation of this group is optional.
optional ciscoIfExtensionSystemGroup Implementation of this group is optional.
optional ciscoIfExtDot1qEtherTypeGroup Implementation of this group is optional.
optional ciscoIfExtUtilizationGroup Implementation of this group is optional.
optional ciscoIfExtDot1dBaseMappingGroup Implementation of this group is optional.
optional ciscoIfExtIfNameMappingGroup Implementation of this group is optional.
optional cieIfStatusListGroup Implementation of this group is optional.
optional cieLinkUpDownNotifEnableGroup Implementation of this group is optional.
optional cieLinkUpDownNotifGroup Implementation of this group is optional.
optional ciscoIfExtensionAsymmetricalSpeedGroup Implementation of this group is optional.
optional ciscoIfExtUtilIntervalGroup Implementation of this group is mandatory for those
platforms which provide the information of calculation
interval for utilization rate on interfaces.
optional cieIfIndexPersistenceGroup Implementation of this group is mandatory for those
interfaces which support ifIndex Persistence.
Object refinements
ObjectAccessSyntaxDescription
cieIfDhcpMode readonly
false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
cieIfMtu readonly
It is compliant to implement this object as
read-only.

OID .1.3.6.1.4.1.9.9.276.2.1.10
The compliance statement for entities which
implement the CISCO-IF-EXTENSION-MIB.
Required groups
optional ciscoIfExtensionTablePacketGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup2 Implementation of this group is optional.
optional ciscoIfExtensionSystemGroup Implementation of this group is optional.
optional ciscoIfExtDot1qEtherTypeGroup Implementation of this group is optional.
optional ciscoIfExtUtilizationGroup Implementation of this group is optional.
optional ciscoIfExtDot1dBaseMappingGroup Implementation of this group is optional.
optional ciscoIfExtIfNameMappingGroup Implementation of this group is optional.
optional cieIfStatusListGroup Implementation of this group is optional.
optional cieLinkUpDownNotifEnableGroup Implementation of this group is optional.
optional cieLinkUpDownNotifGroup Implementation of this group is optional.
optional ciscoIfExtensionAsymmetricalSpeedGroup Implementation of this group is optional.
optional ciscoIfExtUtilIntervalGroup Implementation of this group is mandatory for those
platforms which provide the information of calculation
interval for utilization rate on interfaces.
optional cieDelayedLinkUpDownNotifNotifGroup Implementation of this group is optional.
optional cieDelayedLinkUpDownNotifNotifEnableGroup Implementation of this group is optional.
Object refinements
ObjectAccessSyntaxDescription
cieIfDhcpMode readonly
false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
cieIfMtu readonly
It is compliant to implement this object as
read-only.

OID .1.3.6.1.4.1.9.9.276.2.1.11
The compliance statement for entities which
implement the CISCO-IF-EXTENSION-MIB.
Required groups
optional ciscoIfExtensionTablePacketGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup2 Implementation of this group is optional.
optional ciscoIfExtensionSystemGroup Implementation of this group is optional.
optional ciscoIfExtDot1qEtherTypeGroup Implementation of this group is optional.
optional ciscoIfExtUtilizationGroup Implementation of this group is optional.
optional ciscoIfExtDot1dBaseMappingGroup Implementation of this group is optional.
optional ciscoIfExtIfNameMappingGroup Implementation of this group is optional.
optional cieIfStatusListGroup Implementation of this group is optional.
optional cieLinkUpDownNotifEnableGroup Implementation of this group is optional.
optional cieLinkUpDownNotifGroup Implementation of this group is optional.
optional ciscoIfExtensionAsymmetricalSpeedGroup Implementation of this group is optional.
optional ciscoIfExtUtilIntervalGroup Implementation of this group is mandatory for those
platforms which provide the information of calculation
interval for utilization rate on interfaces.
optional cieDelayedLinkUpDownNotifNotifGroup Implementation of this group is optional.
optional cieDelayedLinkUpDownNotifNotifEnableGroup Implementation of this group is optional.
optional cieIfIndexPersistenceControlGroup Implementation of this group is mandatory for those
interfaces which support ifIndex Persistence.
Object refinements
ObjectAccessSyntaxDescription
cieIfDhcpMode readonly
false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
cieIfMtu readonly
It is compliant to implement this object as
read-only.

OID .1.3.6.1.4.1.9.9.276.2.1.12
The compliance statement for entities which
implement the CISCO-IF-EXTENSION-MIB.
Required groups
optional ciscoIfExtensionTablePacketGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup Implementation of this group is optional.
optional ciscoIfExtensionSystemGroup Implementation of this group is optional.
optional ciscoIfExtDot1qEtherTypeGroup Implementation of this group is optional.
optional ciscoIfExtUtilizationGroup Implementation of this group is optional.
optional ciscoIfExtDot1dBaseMappingGroup Implementation of this group is optional.
optional ciscoIfExtIfNameMappingGroup Implementation of this group is optional.
optional cieIfStatusListGroup Implementation of this group is optional.
optional cieLinkUpDownNotifEnableGroup Implementation of this group is optional.
optional cieLinkUpDownNotifGroup Implementation of this group is optional.
optional ciscoIfExtensionAsymmetricalSpeedGroup Implementation of this group is optional.
optional ciscoIfExtUtilIntervalGroup Implementation of this group is mandatory for those
platforms which provide the information of calculation
interval for utilization rate on interfaces.
optional cieDelayedLinkUpDownNotifNotifGroup Implementation of this group is optional.
optional cieDelayedLinkUpDownNotifNotifEnableGroup Implementation of this group is optional.
optional cieIfIndexPersistenceControlGroup Implementation of this group is mandatory for those
interfaces which support ifIndex Persistence.
optional ciscoIfExtensionTableIntfGroup3 Implementation of this group is optional.
Object refinements
ObjectAccessSyntaxDescription
cieIfDhcpMode readonly
false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
cieIfMtu readonly
It is compliant to implement this object as
read-only.

OID .1.3.6.1.4.1.9.9.276.2.1.13
The compliance statement for entities which
implement the CISCO-IF-EXTENSION-MIB.
Required groups
optional ciscoIfExtensionTablePacketGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup Implementation of this group is optional.
optional ciscoIfExtensionSystemGroup Implementation of this group is optional.
optional ciscoIfExtDot1qEtherTypeGroup Implementation of this group is optional.
optional ciscoIfExtUtilizationGroup Implementation of this group is optional.
optional ciscoIfExtDot1dBaseMappingGroup Implementation of this group is optional.
optional ciscoIfExtIfNameMappingGroup Implementation of this group is optional.
optional cieLinkUpDownNotifEnableGroup Implementation of this group is optional.
optional cieLinkUpDownNotifGroup Implementation of this group is optional.
optional ciscoIfExtensionAsymmetricalSpeedGroup Implementation of this group is optional.
optional ciscoIfExtUtilIntervalGroup Implementation of this group is mandatory for those
platforms which provide the information of calculation
interval for utilization rate on interfaces.
optional cieDelayedLinkUpDownNotifNotifGroup Implementation of this group is optional.
optional cieDelayedLinkUpDownNotifNotifEnableGroup Implementation of this group is optional.
optional cieIfIndexPersistenceControlGroup Implementation of this group is mandatory for those
interfaces which support ifIndex Persistence.
optional ciscoIfExtensionTableIntfGroup3 Implementation of this group is optional.
optional cieIfStatusListGroup Implementation of this group is optional.
optional cieIfStatusListGroupSup1 Implementation of this group is optional.
Object refinements
ObjectAccessSyntaxDescription
cieIfDhcpMode readonly
false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
cieIfMtu readonly
It is compliant to implement this object as
read-only.

OID .1.3.6.1.4.1.9.9.276.2.1.14
The compliance statement for entities which
implement the CISCO-IF-EXTENSION-MIB.
Required groups
optional ciscoIfExtensionTablePacketGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup Implementation of this group is optional.
optional ciscoIfExtensionSystemGroup Implementation of this group is optional.
optional ciscoIfExtDot1qEtherTypeGroup Implementation of this group is optional.
optional ciscoIfExtUtilizationGroup Implementation of this group is optional.
optional ciscoIfExtDot1dBaseMappingGroup Implementation of this group is optional.
optional ciscoIfExtIfNameMappingGroup Implementation of this group is optional.
optional cieLinkUpDownNotifEnableGroup Implementation of this group is optional.
optional cieLinkUpDownNotifGroup Implementation of this group is optional.
optional ciscoIfExtensionAsymmetricalSpeedGroup Implementation of this group is optional.
optional ciscoIfExtUtilIntervalGroup Implementation of this group is mandatory for those
platforms which provide the information of calculation
interval for utilization rate on interfaces.
optional cieDelayedLinkUpDownNotifNotifGroup Implementation of this group is optional.
optional cieDelayedLinkUpDownNotifNotifEnableGroup Implementation of this group is optional.
optional cieIfIndexPersistenceControlGroup Implementation of this group is mandatory for those
interfaces which support ifIndex Persistence.
optional cieIfStatusListGroup Implementation of this group is optional.
optional cieIfStatusListGroupSup1 Implementation of this group is optional.
optional cieIfVlStatsGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup3 Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup3SupR01 Implementation of this group is optional.
Object refinements
ObjectAccessSyntaxDescription
cieIfDhcpMode readonly
false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
cieIfMtu readonly
It is compliant to implement this object as
read-only.
cieIfSpeedGroupConfig readonly
Write access is optional.

OID .1.3.6.1.4.1.9.9.276.2.1.15
The compliance statement for entities which
implement the CISCO-IF-EXTENSION-MIB.
Required groups
optional ciscoIfExtensionTablePacketGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup Implementation of this group is optional.
optional ciscoIfExtensionSystemGroup Implementation of this group is optional.
optional ciscoIfExtDot1qEtherTypeGroup Implementation of this group is optional.
optional ciscoIfExtUtilizationGroup Implementation of this group is optional.
optional ciscoIfExtDot1dBaseMappingGroup Implementation of this group is optional.
optional ciscoIfExtIfNameMappingGroup Implementation of this group is optional.
optional cieLinkUpDownNotifGroup Implementation of this group is optional.
optional ciscoIfExtensionAsymmetricalSpeedGroup Implementation of this group is optional.
optional ciscoIfExtUtilIntervalGroup Implementation of this group is mandatory for those
platforms which provide the information of calculation
interval for utilization rate on interfaces.
optional cieDelayedLinkUpDownNotifNotifGroup Implementation of this group is optional.
optional cieDelayedLinkUpDownNotifNotifEnableGroup Implementation of this group is optional.
optional cieIfIndexPersistenceControlGroup Implementation of this group is mandatory for those
interfaces which support ifIndex Persistence.
optional cieIfStatusListGroup Implementation of this group is optional.
optional cieIfStatusListGroupSup1 Implementation of this group is optional.
optional cieIfVlStatsGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup3 Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup3SupR01 Implementation of this group is optional.
optional cieLinkUpDownNotifConfigGroup Implementation of this group is optional.
Object refinements
ObjectAccessSyntaxDescription
cieIfDhcpMode readonly
false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
cieIfMtu readonly
It is compliant to implement this object as
read-only.
cieIfSpeedGroupConfig readonly
Write access is optional.

OID .1.3.6.1.4.1.9.9.276.2.1.16
The compliance statement for entities which
implement the CISCO-IF-EXTENSION-MIB.
Required groups
optional ciscoIfExtensionTablePacketGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup Implementation of this group is optional.
optional ciscoIfExtensionSystemGroup Implementation of this group is optional.
optional ciscoIfExtDot1qEtherTypeGroup Implementation of this group is optional.
optional ciscoIfExtUtilizationGroup Implementation of this group is optional.
optional ciscoIfExtDot1dBaseMappingGroup Implementation of this group is optional.
optional ciscoIfExtIfNameMappingGroup Implementation of this group is optional.
optional cieLinkUpDownNotifGroup Implementation of this group is optional.
optional ciscoIfExtensionAsymmetricalSpeedGroup Implementation of this group is optional.
optional ciscoIfExtUtilIntervalGroup Implementation of this group is mandatory for those
platforms which provide the information of calculation
interval for utilization rate on interfaces.
optional cieDelayedLinkUpDownNotifNotifGroup Implementation of this group is optional.
optional cieDelayedLinkUpDownNotifNotifEnableGroup Implementation of this group is optional.
optional cieIfIndexPersistenceControlGroup Implementation of this group is mandatory for those
interfaces which support ifIndex Persistence.
optional cieIfStatusListGroup Implementation of this group is optional.
optional cieIfStatusListGroupSup1 Implementation of this group is optional.
optional cieIfVlStatsGroup Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup3 Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup3SupR01 Implementation of this group is optional.
optional ciscoIfExtensionTableIntfGroup3SupR02 Implementation of this group is optional.
optional cieLinkUpDownNotifConfigGroup Implementation of this group is optional.
Object refinements
ObjectAccessSyntaxDescription
cieIfDhcpMode readonly
false(2)
It is compliant to implement this object as
read-only. Support for 'true' is only
required on interfaces which support DHCP.
cieIfMtu readonly
It is compliant to implement this object as
read-only.
cieIfSpeedGroupConfig readonly
Write access is optional.
cieIfTransceiverFrequencyConfig readonly
Write access is optional.
cieIfFillPatternConfig readonly
Write access is optional.
cieIfIgnoreBitErrorsConfig readonly
Write access is optional.
cieIfIgnoreInterruptThresholdConfig readonly
Write access is optional.
Notifications / Traps (3)
NameOIDDescription
.1.3.6.1.4.1.9.9.276.0.1
A cisco specific linkDown notification
signifies that the SNMP entity, acting in an
agent role, has detected that the ifOperStatus
object for one of its communication links is
about to enter the down state from some other
state (but not from the notPresent state).
The varbinds for this notification indicate the
interface information of the communication
link.
.1.3.6.1.4.1.9.9.276.0.2
A cisco specific linkUp trap signifies that
the SNMP entity, acting in an agent role, has
detected that the ifOperStatus object for one
of its communication links left the down state
and transitioned into some other state (but not
into the notPresent state). The varbinds for
this notification indicate the interface
information of the communication link.
.1.3.6.1.4.1.9.9.276.0.3
This notification indicates when an interface's operational
status has transitioned and remained in that state for a time
specified by cieDelayedLinkUpDownDelay.