cpwCTDMPerf1DayIntervalMissingPkts
CISCO-IETF-PW-TDM-MIB ·
.1.3.6.1.4.1.9.10.131.1.7.1.4
Object
Number of missing packets (as detected via control word sequence number gaps).
Context
- MIB
- CISCO-IETF-PW-TDM-MIB
- OID
.1.3.6.1.4.1.9.10.131.1.7.1.4- Type
- column
- Access
- readonly
- Status
- current
- Units
- packets
- Parent
- cpwCTDMPerf1DayIntervalEntry
- Table
- cpwCTDMPerf1DayIntervalTable
- Siblings
- 11
Syntax
packets SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cpwCTDMPerf1DayIntervalNumber The number of interval, where 1 indicates current day
measured period and 2 and above indicate previous days
respectively | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.131.1.7.1.1 |
| cpwCTDMPerf1DayIntervalSESs The counter associated with the number of Severely
Error Seconds. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.131.1.7.1.10 |
| cpwCTDMPerf1DayIntervalUASs The counter associated with the number of
UnAvailable Seconds.
When first entering the UAS state, the number
of SES To UAS is added to this object, then as each
additional UAS occ… | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.131.1.7.1.11 |
| cpwCTDMPerf1DayIntervalFC This object represents the number of TDM failure
events. A failure event begins when the LOPS failure
is declared, and ends when the failure is cleared. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.131.1.7.1.12 |
| cpwCTDMPerf1DayIntervalValidData This variable indicates if the data for this interval
is valid. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.10.131.1.7.1.2 |
| cpwCTDMPerf1DayIntervalDuration The duration of a particular interval in seconds,
Adjustments in the system's time-of-day clock, may
cause the interval to be greater or less than, the
normal value. Therefore thi… | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.10.131.1.7.1.3 |
| cpwCTDMPerf1DayIntervalPktsReOrder Number of packets detected out of sequence (via control
word sequence number), but successfully re-ordered. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.131.1.7.1.5 |
| cpwCTDMPerf1DayIntervalJtrBfrUnderruns Number of times a packet needed to be played
out and the jitter buffer was empty. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.131.1.7.1.6 |
| cpwCTDMPerf1DayIntervalMisOrderDropped Number of packets detected out of order(via control word
sequence numbers), and could not be re-ordered, or could
not fit in the jitter buffer. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.131.1.7.1.7 |
| cpwCTDMPerf1DayIntervalMalformedPkt Number of packets detected with unexpected size, or
bad headers' stack. | column | packets SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.131.1.7.1.8 |
| cpwCTDMPerf1DayIntervalESs The counter associated with the number of Error
Seconds encountered. | column | seconds SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.10.131.1.7.1.9 |