CISCO-IETF-PW-TDM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
63

cpwCTDMTable

table
.1.3.6.1.4.1.9.10.131.1.1 · 1 row entry · 11 columns
Open in standard view 
This table contains basic information including ifIndex,
and pointers to entries in the relevant TDM config
tables for this TDM PW.
cpwCTDMEntry entry .1.3.6.1.4.1.9.10.131.1.1.1
This table is indexed by the same index that was
created for the associated entry in the VC Table
(in the CISCO-IETF-PW-MIB).

- The CpwVcIndex.

An entry is created in this table by the agent …
Indexes
Column Syntax OID
cpwCTDMRate
The parameter represents the bit-rate of the TDM service
in multiples of the 'basic' 64 Kbit/s rate. It complements
the definition of cpwVcType used in CISCO-IETF-PW-MIB.
For structure-agnostic the following should be u…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.131.1.1.1.1
cpwCTDMIfIndex
This is a unique index within the ifTable. It represents
the interface index of the full link or the interface
index for the bundle holding the group of
time slots to be transmitted via this PW connection.
…
IF-MIBInterfaceIndexOrZeror/w
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.10.131.1.1.1.2
cpwCGenTDMCfgIndex
Index to the generic parameters in the TDM configuration
table that appears in this MIB module. It is likely that
multiple TDM PWs of the same characteristic will share
a single TDM Cfg entry.
CpwTDMCfgIndexr/w
Textual Convention: CpwTDMCfgIndex Unsigned32
 .1.3.6.1.4.1.9.10.131.1.1.1.3
cpwCRelTDMCfgIndex
Index to the relevant TDM configuration table entry
that appears in one of the related MIB modules
such as TDMoIP or CESoPSN. It is likely that
multiple TDM PWs of the same characteristic will share
a single configurati…
CpwTDMCfgIndexr/w
Textual Convention: CpwTDMCfgIndex Unsigned32
 .1.3.6.1.4.1.9.10.131.1.1.1.4
cpwCTDMConfigError
Any of the bits are set if the local configuration is
not compatible with the peer configuration as available
from the various parameters options.

-tdmTypeIncompatible bit is set if the local configuratio…
Bits
Enumerated Values:
0other
1tdmTypeIncompatible
2peerRtpIncompatible
3peerPayloadSizeIncompatible
 .1.3.6.1.4.1.9.10.131.1.1.1.5
cpwCTDMTimeElapsed
The number of seconds, including partial seconds,
that have elapsed since the beginning of the current
measurement period. If, for some reason, such as an
adjustment in the system's time-of-day clock, the
current interv…
secondsInteger32
Constraints:
range: 1-900
 .1.3.6.1.4.1.9.10.131.1.1.1.6
cpwCTDMValidIntervals
The number of previous 15-minute intervals for which data
was collected.
An agent with TDM capability must be capable of supporting
at least n intervals. The minimum value of n is 4, The
default of n is 32 and the maxim…
minutesInteger32
Constraints:
range: 0-96
 .1.3.6.1.4.1.9.10.131.1.1.1.7
cpwCTDMValidDayIntervals
The number of previous days for which data
was collected.
An agent with TDM capability must be capable of supporting
at least n intervals. The minimum value of n is 1, The
default of n is 1 and the maximum value of n is…
daysInteger32
Constraints:
range: 0-30
 .1.3.6.1.4.1.9.10.131.1.1.1.8
cpwCTDMCurrentIndications
The following defects should be detected and reported
upon request:

-Stray packets MAY be detected by the PSN and multiplexing
layers. Stray packets MUST be discarded by the CE-bound IWF
and their detecti…
Bits
Enumerated Values:
0other
1strayPacket
2malformedPacket
3excessivePktLossRate
4bufferOverrun
5bufferUnderrun
6remotePktLoss
7pktMisOrder
8packetLoss
9tdmFault
 .1.3.6.1.4.1.9.10.131.1.1.1.9
cpwCTDMLatchedIndications
The state of TDM indicators when the TDM PW last declared
an error second (either as ES, SES or a second with
errors inside a UAS) condition. At this time, only LOPS
can create a failure. Since indicators other than LOP…
Bits
Enumerated Values:
0other
1staryPacket
2malformedPacket
3excessivePktLossRate
4bufferOverrun
5bufferUnderrun
6remotePktLoss
7pktMisOrder
8packetLoss
9tdmFault
 .1.3.6.1.4.1.9.10.131.1.1.1.10
cpwCTDMLastEsTimeStamp
The value of sysUpTime at the most recent occasion at
which the TDM PW entered the ES or SES state.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.9.10.131.1.1.1.11

cpwCTDMCfgTable

table
.1.3.6.1.4.1.9.10.131.1.3 · 1 row entry · 19 columns
Open in standard view 
This table contains a set of parameters that may be
referenced by one or more TDM PWs in cpwCTDMTable.
cpwCTDMCfgEntry entry .1.3.6.1.4.1.9.10.131.1.3.1
These parameters define the characteristics of a
TDM PW. They are grouped here to ease NMS burden.
Once an entry is created here it may be re-used
by many PWs.
Indexes
cpwCTDMCfgIndex
Column Syntax OID
cpwCTDMCfgIndex
Index to an entry in this table. The value is a copy of
the assigned cpwCTDMCfgIndexNext.
CpwTDMCfgIndex
Textual Convention: CpwTDMCfgIndex Unsigned32
 .1.3.6.1.4.1.9.10.131.1.3.1.1
cpwCTDMCfgConfErr
This object indicates the various configuration errors,
illegal settings within the cpwCTDMCfg table. The errors
can be due to several reasons, like Payload size mismatch
or Jitter Buffer depth value mistmatch.
…
Bits
Enumerated Values:
0other
1payloadSize
2jtrBfrDepth
 .1.3.6.1.4.1.9.10.131.1.3.1.2
cpwCTDMCfgPayloadSize
The value of this object indicates the PayLoad Size (in
bytes) to be defined during the PW setUp. Upon TX,
implementation must be capable of carrying that amount of
bytes. Upon RX, when the LEN field is set to 0, the
pa…
bytesSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.3.1.3
cpwCTDMCfgPktReorder
If set to true, CE bound packets are queued in the
jitter buffer, out of order packets are re-ordered. The
maximum sequence number differential (i.e., the range in
which re-sequencing can occur) is dependant on the dept…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.131.1.3.1.4
cpwCTDMCfgRtpHdrUsed
If the value of this object is set to false, then a
RTP header is not pre-pended to the TDM packet.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.131.1.3.1.5
cpwCTDMCfgJtrBfrDepth
The size of this buffer SHOULD be locally
configured to allow accommodation to the PSN-specific
packet delay variation.

If configured to a value not supported by the
implementation, the agent MUST return …
microsecondSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.3.1.6
cpwCTDMCfgPayloadSuppression
This object indicates whether the Payload suppression
is eanbled or disabled.
Payload MAY be omitted in order to conserve bandwidth.

enable - Payload suppression is allowed.
disable - No Payload suppresi…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.9.10.131.1.3.1.7
cpwCTDMCfgConsecPktsInSynch
The number of consecutive packets with sequential
sequence numbers that are required to exit the
Loss of Packets (LOPS) state.
packetsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.3.1.8
cpwCTDMCfgConsecMissPktsOutSynch
The number of consecutive missing packets that are
required to enter the LOPS state.
packetsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.3.1.9
cpwCTDMCfgSetUp2SynchTimeOut
The amount of time the host should wait before declaring
the pseudo wire in down state, if the number of consecutive
TDM packets that have been received after changing the
administrative status to up and after finaliza…
millisecondSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.3.1.10
cpwCTDMCfgPktReplacePolicy
This parameter determines the value to be played when CE
bound packets have over/underflow the jitter buffer, or are
missing for any reason. This AIS (Alarm Indication Signal)
pattern is sent (played) on the TDM line.
…
Enumerationr/w
Enumerated Values:
1ais
2implementationSpecific
 .1.3.6.1.4.1.9.10.131.1.3.1.11
cpwCTDMCfgAvePktLossTimeWindow
The length of time over which the average packet
loss rate should be computed to detect Excessive packet
loss rate
millisecondSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.10.131.1.3.1.12
cpwCTDMCfgExcessivePktLossThreshold
Excessive packet loss rate is detected by computing the
average packetloss rate over a
cpwCTDMCfgAvePktLossTimeWindow amount of time and
comparing it with this threshold value.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.3.1.13
cpwCTDMCfgAlarmThreshold
Alarms are only reported when the defect state persists
for the length of time specified by this object.
The object's unit is millisec
millisecondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.3.1.14
cpwCTDMCfgClearAlarmThreshold
Alarm MUST be cleared after the corresponding defect is
undetected for the amount of time specified by this object.
The object's unit is millisec
millisecondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.3.1.15
cpwCTDMCfgMissingPktsToSes
Number of missing packets detected (consecutive or not)
within a 1 second window to cause a Severely Error
Second (SES) to be counted.
secondsSNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.3.1.16
cpwCTDMCfgTimestampMode
Timestamp generation MAY be used in one of the following
modes:
1. Absolute mode: the PSN-bound IWF sets timestamps
using the clock recovered from the incoming TDM attachment
circuit. As a consequence, the timestamps …
Enumerationr/w
Enumerated Values:
1notApplicable
2absolute
3differential
 .1.3.6.1.4.1.9.10.131.1.3.1.17
cpwCTDMCfgStorageType
This variable indicates the storage type for this row.
The following are the read-write objects in permanent(4)
rows, that an agent must allow to be writable:
cpwCTDMCfgPayloadSize, cpwCTDMCfgPktReorder,
cpwCTDMCfgRtpHd…
SNMPv2-TCStorageTyper/w
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.9.10.131.1.3.1.18
cpwCTDMCfgRowStatus
The status of this conceptual row.

To create a row in this table, a manager must
set this object to either createAndGo(4) or
createAndWait(5).

All of the columnar objects have to be set to
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.9.10.131.1.3.1.19

cpwCTDMPerfCurrentTable

table
.1.3.6.1.4.1.9.10.131.1.5 · 1 row entry · 9 columns
Open in standard view 
This table provides TDM PW performance information.
This includes current 15 minute interval counts. 
          
The table includes counters that work together to
integrate errors and the lack of errors on the TDM PW.
An error is caused by a missing packet. Missing packet
can be a result of, packet loss in the network,
(uncorrectable) packet out of sequence, packet length error,
jitter buffer overflow, and jitter buffer underflow.
The result is declaring whether or not the TDM PW is in
Loss of Packet (LOPS) state.
cpwCTDMPerfCurrentEntry entry .1.3.6.1.4.1.9.10.131.1.5.1
An entry in this table is created by the agent for every
cpwCTDMTable entry. After 15 minutes, the contents of this
table entry are copied to a new entry in the
cpwCTDMPerfInterval table and the counts in this entry
are…
Indexes
Column Syntax OID
cpwCTDMPerfCurrentMissingPkts
Number of missing packets (as detected via control word
sequence number gaps).
packetsPerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.9.10.131.1.5.1.1
cpwCTDMPerfCurrentPktsReOrder
Number of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.
packetsPerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.9.10.131.1.5.1.2
cpwCTDMPerfCurrentJtrBfrUnderruns
Number of times a packet needed to be played
out and the jitter buffer was empty.
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.9.10.131.1.5.1.3
cpwCTDMPerfCurrentMisOrderDropped
Number of packets detected out of order(via control word
sequence numbers), and could not be re-ordered, or could
not fit in the jitter buffer.
packetsPerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.9.10.131.1.5.1.4
cpwCTDMPerfCurrentMalformedPkt
Number of packets detected with unexpected size, or
bad headers' stack
packetsPerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.9.10.131.1.5.1.5
cpwCTDMPerfCurrentESs
The counter associated with the number of Error
Seconds encountered. Any malformed packet, sequence error
and similar are considered as error second
secondsPerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.9.10.131.1.5.1.6
cpwCTDMPerfCurrentSESs
The counter associated with the number of
Severely Error Seconds encountered.
secondsPerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.9.10.131.1.5.1.7
cpwCTDMPerfCurrentUASs
The counter associated with the number of
Unavailable Seconds encountered. Any consequtive
five seconds of SES are counted as one UAS
secondsPerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.9.10.131.1.5.1.8
cpwCTDMPerfCurrentFC
This object represents the number of TDM failure
events. A failure event begins when the LOPS failure
is declared, and ends when the failure is cleared. A
failure event that begins in one period and ends in
another peri…
PerfHist-TC-MIBPerfCurrentCount
Textual Convention: PerfHist-TC-MIBPerfCurrentCount Unsigned32
 .1.3.6.1.4.1.9.10.131.1.5.1.9

cpwCTDMPerfIntervalTable

table
.1.3.6.1.4.1.9.10.131.1.6 · 1 row entry · 12 columns
Open in standard view 
This table provides performance information per TDM PW
similar to the cpwCTDMPerfCurrentTable above. However,
these counts represent historical 15 minute intervals.
Typically, this table will have a maximum of 96 entries
for a 24 hour period, but is not limited to this.
cpwCTDMPerfIntervalEntry entry .1.3.6.1.4.1.9.10.131.1.6.1
An entry in this table is created by the agent for
every cpwCTDMPerfCurrentEntry that is 15 minutes old.
The contents of the Current entry are copied to the new
entry here. The Current entry, then resets its counts
to z…
Indexes
CISCO-IETF-PW-MIBcpwVcIndex cpwCTDMPerfIntervalNumber
Column Syntax OID
cpwCTDMPerfIntervalNumber
This object indicates a number (normally between 1 and
96 to cover a 24 hour period) which identifies the interval
for which the set of statistics is available. The interval
identified by 1 is the most recently complete…
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.6.1.1
cpwCTDMPerfIntervalValidData
This variable indicates if the data for this interval
is valid.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.131.1.6.1.2
cpwCTDMPerfIntervalDuration
The duration of a particular interval in seconds.
Adjustments in the system's time-of-day clock, may
cause the interval to be greater or less than, the
normal value. Therefore this actual interval value
is provided.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.6.1.3
cpwCTDMPerfIntervalMissingPkts
Number of missing packets (as detected via control
word sequence number gaps).
packetsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.9.10.131.1.6.1.4
cpwCTDMPerfIntervalPktsReOrder
Number of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.
packetsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.9.10.131.1.6.1.5
cpwCTDMPerfIntervalJtrBfrUnderruns
Number of times a packet needed to be played
out and the jitter buffer was empty.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.9.10.131.1.6.1.6
cpwCTDMPerfIntervalMisOrderDropped
Number of packets detected out of order(via control word
sequence numbers), and could not be re-ordered, or could
not fit in the jitter buffer.
packetsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.9.10.131.1.6.1.7
cpwCTDMPerfIntervalMalformedPkt
Number of packets detected with unexpected size, or
bad headers' stack
packetsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.9.10.131.1.6.1.8
cpwCTDMPerfIntervalESs
The counter associated with the number of Error
Seconds encountered.
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.9.10.131.1.6.1.9
cpwCTDMPerfIntervalSESs
The counter associated with the number of
Severely Error Seconds encountered.
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.9.10.131.1.6.1.10
cpwCTDMPerfIntervalUASs
The counter associated with the number of
Unavailable Seconds encountered.
secondsPerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.9.10.131.1.6.1.11
cpwCTDMPerfIntervalFC
This object represents the number of TDM failure
events. A failure event begins when the LOPS failure
is declared, and ends when the failure is cleared. A
failure event that begins in one period and ends in
another peri…
PerfHist-TC-MIBPerfIntervalCount
Textual Convention: PerfHist-TC-MIBPerfIntervalCount Unsigned32
 .1.3.6.1.4.1.9.10.131.1.6.1.12

cpwCTDMPerf1DayIntervalTable

table
.1.3.6.1.4.1.9.10.131.1.7 · 1 row entry · 12 columns
Open in standard view 
This table provides performance information per TDM PW
similar to the cpwCTDMPerfIntervalTable above. However,
these counters represent historical 1 day intervals up to
one full month. The table consists of real time data, as
such it is not persistence across re-boot.
cpwCTDMPerf1DayIntervalEntry entry .1.3.6.1.4.1.9.10.131.1.7.1
An entry is created in this table by the agent
for every entry in the cpwCTDMTable table.
Indexes
CISCO-IETF-PW-MIBcpwVcIndex cpwCTDMPerf1DayIntervalNumber
Column Syntax OID
cpwCTDMPerf1DayIntervalNumber
The number of interval, where 1 indicates current day
measured period and 2 and above indicate previous days
respectively
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.7.1.1
cpwCTDMPerf1DayIntervalValidData
This variable indicates if the data for this interval
is valid.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.9.10.131.1.7.1.2
cpwCTDMPerf1DayIntervalDuration
The duration of a particular interval in seconds,
Adjustments in the system's time-of-day clock, may
cause the interval to be greater or less than, the
normal value. Therefore this actual interval value
is provided.
secondsSNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.7.1.3
cpwCTDMPerf1DayIntervalMissingPkts
Number of missing packets (as detected via control word
sequence number gaps).
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.7.1.4
cpwCTDMPerf1DayIntervalPktsReOrder
Number of packets detected out of sequence (via control
word sequence number), but successfully re-ordered.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.7.1.5
cpwCTDMPerf1DayIntervalJtrBfrUnderruns
Number of times a packet needed to be played
out and the jitter buffer was empty.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.7.1.6
cpwCTDMPerf1DayIntervalMisOrderDropped
Number of packets detected out of order(via control word
sequence numbers), and could not be re-ordered, or could
not fit in the jitter buffer.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.7.1.7
cpwCTDMPerf1DayIntervalMalformedPkt
Number of packets detected with unexpected size, or
bad headers' stack.
packetsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.7.1.8
cpwCTDMPerf1DayIntervalESs
The counter associated with the number of Error
Seconds encountered.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.7.1.9
cpwCTDMPerf1DayIntervalSESs
The counter associated with the number of Severely
Error Seconds.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.7.1.10
cpwCTDMPerf1DayIntervalUASs
The counter associated with the number of
UnAvailable Seconds.
When first entering the UAS state, the number
of SES To UAS is added to this object, then as each
additional UAS occurs, this object increments by one.
secondsSNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.7.1.11
cpwCTDMPerf1DayIntervalFC
This object represents the number of TDM failure
events. A failure event begins when the LOPS failure
is declared, and ends when the failure is cleared.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.10.131.1.7.1.12