cpwCTDMCfgPktReorder

CISCO-IETF-PW-TDM-MIB · .1.3.6.1.4.1.9.10.131.1.3.1.4

Object

column r/w SNMPv2-TCTruthValue

If set to true, CE bound packets are queued in the
jitter buffer, out of order packets are re-ordered. The
maximum sequence number differential (i.e., the range in
which re-sequencing can occur) is dependant on the depth
of the jitter buffer. See cpwCTDMCfgJtrBfrDepth.

Context

MIB: CISCO-IETF-PW-TDM-MIB
OID: .1.3.6.1.4.1.9.10.131.1.3.1.4
Type: column
Access: readwrite
Status: current
Parent: cpwCTDMCfgEntry
Table: cpwCTDMCfgTable
Siblings: 18

Syntax

SNMPv2-TCTruthValue

Source: SNMPv2-TCTruthValue
Base type: Enumeration

Values & Constraints

Type Values

`1`	true
`2`	false

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cpwCTDMCfgIndex Index to an entry in this table. The value is a copy of the assigned cpwCTDMCfgIndexNext.	column	CpwTDMCfgIndex	`.1.3.6.1.4.1.9.10.131.1.3.1.1`
cpwCTDMCfgSetUp2SynchTimeOut The amount of time the host should wait before declaring the pseudo wire in down state, if the number of consecutive TDM packets that have been received after changing the admini…	column	millisecond SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.10.131.1.3.1.10`
cpwCTDMCfgPktReplacePolicy This parameter determines the value to be played when CE bound packets have over/underflow the jitter buffer, or are missing for any reason. This AIS (Alarm Indication Signal) pat…	column	Enumeration	`.1.3.6.1.4.1.9.10.131.1.3.1.11`
cpwCTDMCfgAvePktLossTimeWindow The length of time over which the average packet loss rate should be computed to detect Excessive packet loss rate	column	millisecond SNMPv2-SMIInteger32	`.1.3.6.1.4.1.9.10.131.1.3.1.12`
cpwCTDMCfgExcessivePktLossThreshold Excessive packet loss rate is detected by computing the average packetloss rate over a cpwCTDMCfgAvePktLossTimeWindow amount of time and comparing it with this threshold value.	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.10.131.1.3.1.13`
cpwCTDMCfgAlarmThreshold Alarms are only reported when the defect state persists for the length of time specified by this object. The object's unit is millisec	column	milliseconds SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.10.131.1.3.1.14`
cpwCTDMCfgClearAlarmThreshold Alarm MUST be cleared after the corresponding defect is undetected for the amount of time specified by this object. The object's unit is millisec	column	milliseconds SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.10.131.1.3.1.15`
cpwCTDMCfgMissingPktsToSes Number of missing packets detected (consecutive or not) within a 1 second window to cause a Severely Error Second (SES) to be counted.	column	seconds SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.10.131.1.3.1.16`
cpwCTDMCfgTimestampMode Timestamp generation MAY be used in one of the following modes: 1. Absolute mode: the PSN-bound IWF sets timestamps using the clock recovered from the incoming TDM attachment ci…	column	Enumeration	`.1.3.6.1.4.1.9.10.131.1.3.1.17`
cpwCTDMCfgStorageType This variable indicates the storage type for this row. The following are the read-write objects in permanent(4) rows, that an agent must allow to be writable: cpwCTDMCfgPayloadSiz…	column	SNMPv2-TCStorageType	`.1.3.6.1.4.1.9.10.131.1.3.1.18`
cpwCTDMCfgRowStatus The status of this conceptual row. To create a row in this table, a manager must set this object to either createAndGo(4) or createAndWait(5). All of…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.10.131.1.3.1.19`
cpwCTDMCfgConfErr This object indicates the various configuration errors, illegal settings within the cpwCTDMCfg table. The errors can be due to several reasons, like Payload size mismatch or Jitte…	column	Bits	`.1.3.6.1.4.1.9.10.131.1.3.1.2`
cpwCTDMCfgPayloadSize The value of this object indicates the PayLoad Size (in bytes) to be defined during the PW setUp. Upon TX, implementation must be capable of carrying that amount of bytes. Upon RX…	column	bytes SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.10.131.1.3.1.3`
cpwCTDMCfgRtpHdrUsed If the value of this object is set to false, then a RTP header is not pre-pended to the TDM packet.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.10.131.1.3.1.5`
cpwCTDMCfgJtrBfrDepth The size of this buffer SHOULD be locally configured to allow accommodation to the PSN-specific packet delay variation. If configured to a value not supported by th…	column	microsecond SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.10.131.1.3.1.6`
cpwCTDMCfgPayloadSuppression This object indicates whether the Payload suppression is eanbled or disabled. Payload MAY be omitted in order to conserve bandwidth. enable - Payload suppression i…	column	Enumeration	`.1.3.6.1.4.1.9.10.131.1.3.1.7`
cpwCTDMCfgConsecPktsInSynch The number of consecutive packets with sequential sequence numbers that are required to exit the Loss of Packets (LOPS) state.	column	packets SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.10.131.1.3.1.8`
cpwCTDMCfgConsecMissPktsOutSynch The number of consecutive missing packets that are required to enter the LOPS state.	column	packets SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.9.10.131.1.3.1.9`