ciscoICsuDsuSw56kLoopStatus

Current loop status or alarm condition.  Represented as a sum 
of a bit map.  The variable bit positions are:
              
1   oosOofFromNetwork - The DSU is receiving Out of Service/
        Out of Frame code from network indicating network
        trouble.  This can be a problem with a device at the
        remote DSU.  The most common cause of the this error
        is either the remote DSU is powered off or the remote
        telco connection is open.
2   noReceiveSignal - The DSU has detected sealing current from
        the central office but the receive level is below
        -45db.
4   noSealingCurrent - the DSU does not detect sealing current
        on the loop interface.  This is normal for a private
        network.
8   noFrameSync - At 64k data rate the local loop operates at
        72k with a framing pattern added to maintain byte
        alignment with the network.  This condition is reported
        if the DSU cannot find the framing pattern.
16  attemptingToRateAdap - Set in 'autorate' mode when the DSU
        is searching for the loop rate.
32  rtTestFromTelco - Set when the DSU in telco initiated RT
        test.
64  llTestFromTelco - Set when the DSU in telco initiated LL
        test or when the transmit and receive pairs are
        reversed.
128 rdlFromRemoteDSU - Set when remote digital loopback
        initiated from remote DSU.

MIB

CISCO-ICSUDSU-MIB

OID

.1.3.6.1.4.1.9.9.44.1.3.2.1.2

Type

column

Access

readonly

Status

current

Parent

ciscoICsuDsuSw56kLineStatusEntry

Table

ciscoICsuDsuSw56kLineStatusTable

Siblings

6