ciscoICsuDsuLoopbackStatus
CISCO-ICSUDSU-MIB ·
.1.3.6.1.4.1.9.9.44.1.1.2.1.5
Object
column
Enumeration
Current Status of Loopback. Remaining Loopback results are valid only if status is 'completed' or 'failed' or 'noSyncWithTestPattern'.
Context
- MIB
- CISCO-ICSUDSU-MIB
- OID
.1.3.6.1.4.1.9.9.44.1.1.2.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ciscoICsuDsuTestReportEntry
- Table
- ciscoICsuDsuTestReportTable
- Siblings
- 11
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | completed |
2 | inProgress |
3 | neverPerformed |
4 | failed |
5 | noSyncWithTestPattern |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ciscoICsuDsuLastSelfTestResult The result of the last self test. Represented as a sum of
a bit map. The variable bit positions are:
1 - Flash Checksum bad. Catastrophic error.
2 - EPROM Checksum bad. Catas… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.44.1.1.2.1.1 |
| ciscoICsuDsuUserDefinedPattern User Defined Loopback Pattern. Valid only if
ciscoICsuDsuLoopbackPattern is patternUser. | column | OctetString | .1.3.6.1.4.1.9.9.44.1.1.2.1.10 |
| ciscoICsuDsuLoopbackCode LoopCode used to initiate last remote loopback. Valid only
if a only if a remote loopback was last performed.
standard - standard loopback code. Usually consists of the
… | column | Enumeration | .1.3.6.1.4.1.9.9.44.1.1.2.1.11 |
| ciscoICsuDsuEndTimeOfLastLoopback SysUpTime of completion of last loopback test execution. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.44.1.1.2.1.12 |
| ciscoICsuDsuTimeOfLastSelfTest SysUpTime of LastSelfTest execution. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.44.1.1.2.1.2 |
| ciscoICsuDsuNumResets Number of times CSU/DSU has been reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.44.1.1.2.1.3 |
| ciscoICsuDsuTimeOfLastReset SysUpTime of last CSU/DSU reset. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.44.1.1.2.1.4 |
| ciscoICsuDsuLoopbackNumErrors Number of Bit errors that occurred in last successful loopback
test. Valid only if remote loopback with pattern was
performed and a sync was achieved on the test pattern. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.44.1.1.2.1.6 |
| ciscoICsuDsuLoopbackDuration Duration of last successful loopback test in hundredths of
seconds. Note that it is possible for the CSU/DSU to lose
framing during the test. If so, the duration represents th… | column | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.9.9.44.1.1.2.1.7 |
| ciscoICsuDsuLoopbackPoint Point in network where last loopback was performed.
Meaning for t1 CSU/DSU:
dtePayload - local DSU loopback. The configured 'fractions'
of the DS1 signal is… | column | Enumeration | .1.3.6.1.4.1.9.9.44.1.1.2.1.8 |
| ciscoICsuDsuLoopbackPattern Test pattern used for locally initiated remote loopback.
Valid only if a remote loopback was last performed.
Following patterns valid for T1 or Switched 56k CSU/DSU… | column | Enumeration | .1.3.6.1.4.1.9.9.44.1.1.2.1.9 |