ciscoICsuDsuLoopbackDuration
CISCO-ICSUDSU-MIB ·
.1.3.6.1.4.1.9.9.44.1.1.2.1.7
Object
column
SNMPv2-SMITimeTicks
Duration of last successful loopback test in hundredths of seconds. Note that it is possible for the CSU/DSU to lose framing during the test. If so, the duration represents the time between reframing and end of test. This simply means that the start time of last loopback cannot be calculated by subtracting this duration from the end time of last loopback.
Context
- MIB
- CISCO-ICSUDSU-MIB
- OID
.1.3.6.1.4.1.9.9.44.1.1.2.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ciscoICsuDsuTestReportEntry
- Table
- ciscoICsuDsuTestReportTable
- Siblings
- 11
Syntax
SNMPv2-SMITimeTicks
- Source
- SNMPv2-SMITimeTicks
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ciscoICsuDsuLastSelfTestResult The result of the last self test. Represented as a sum of
a bit map. The variable bit positions are:
1 - Flash Checksum bad. Catastrophic error.
2 - EPROM Checksum bad. Catas… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.44.1.1.2.1.1 |
| ciscoICsuDsuUserDefinedPattern User Defined Loopback Pattern. Valid only if
ciscoICsuDsuLoopbackPattern is patternUser. | column | OctetString | .1.3.6.1.4.1.9.9.44.1.1.2.1.10 |
| ciscoICsuDsuLoopbackCode LoopCode used to initiate last remote loopback. Valid only
if a only if a remote loopback was last performed.
standard - standard loopback code. Usually consists of the
… | column | Enumeration | .1.3.6.1.4.1.9.9.44.1.1.2.1.11 |
| ciscoICsuDsuEndTimeOfLastLoopback SysUpTime of completion of last loopback test execution. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.44.1.1.2.1.12 |
| ciscoICsuDsuTimeOfLastSelfTest SysUpTime of LastSelfTest execution. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.44.1.1.2.1.2 |
| ciscoICsuDsuNumResets Number of times CSU/DSU has been reset. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.44.1.1.2.1.3 |
| ciscoICsuDsuTimeOfLastReset SysUpTime of last CSU/DSU reset. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.44.1.1.2.1.4 |
| ciscoICsuDsuLoopbackStatus Current Status of Loopback. Remaining Loopback results
are valid only if status is 'completed' or 'failed' or
'noSyncWithTestPattern'. | column | Enumeration | .1.3.6.1.4.1.9.9.44.1.1.2.1.5 |
| ciscoICsuDsuLoopbackNumErrors Number of Bit errors that occurred in last successful loopback
test. Valid only if remote loopback with pattern was
performed and a sync was achieved on the test pattern. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.44.1.1.2.1.6 |
| ciscoICsuDsuLoopbackPoint Point in network where last loopback was performed.
Meaning for t1 CSU/DSU:
dtePayload - local DSU loopback. The configured 'fractions'
of the DS1 signal is… | column | Enumeration | .1.3.6.1.4.1.9.9.44.1.1.2.1.8 |
| ciscoICsuDsuLoopbackPattern Test pattern used for locally initiated remote loopback.
Valid only if a remote loopback was last performed.
Following patterns valid for T1 or Switched 56k CSU/DSU… | column | Enumeration | .1.3.6.1.4.1.9.9.44.1.1.2.1.9 |