cempMemBufferSize
CISCO-ENHANCED-MEMPOOL-MIB ·
.1.3.6.1.4.1.9.9.221.1.1.2.1.5
Object
Indicates the size of buffer element in number of bytes on the physical entity.
Context
- MIB
- CISCO-ENHANCED-MEMPOOL-MIB
- OID
.1.3.6.1.4.1.9.9.221.1.1.2.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Units
- bytes
- Parent
- cempMemBufferPoolEntry
- Table
- cempMemBufferPoolTable
- Siblings
- 21
Syntax
bytes SNMPv2-SMIUnsigned32
- Source
- SNMPv2-SMIUnsigned32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cempMemBufferPoolIndex Within a physical entity, a unique value used
to represent each buffer pool. | column | CempMemBufferPoolIndex | .1.3.6.1.4.1.9.9.221.1.1.2.1.1 |
| cempMemBufferTotal Indicates the total number of buffers
(include allocated and free buffers) in the
buffer pool on the physical entity. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.221.1.1.2.1.10 |
| cempMemBufferFree Indicates the current number of free buffers in
the buffer pool on the physical entity.
Note that the cempMemBufferFree is less than or equal
to cempMemBufferTotal. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.9.9.221.1.1.2.1.11 |
| cempMemBufferHit Indicates the number of buffers successfully
allocated from the buffer pool. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.221.1.1.2.1.12 |
| cempMemBufferMiss Indicates the number of times a buffer has been
requested, but no buffers were available in the
buffer pool, or when there were fewer than min
buffers(cempMemBufferMin) in the bu… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.221.1.1.2.1.13 |
| cempMemBufferFreeHit Indicates the number of successful frees/deallocations
from the buffer pool. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.221.1.1.2.1.14 |
| cempMemBufferFreeMiss Indicates the number of unsuccessful attempts
to free/deallocate a buffer from the buffer pool.
For example, this could be due to ownership errors
where the application that did … | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.221.1.1.2.1.15 |
| cempMemBufferPermChange This value is the difference of the desired number
of permanent buffer & total number of permanent
buffers present in the pool. A positive value of
this object tells the number … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.221.1.1.2.1.16 |
| cempMemBufferPeak Indicates the peak number of buffers in pool on the
physical entity. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.221.1.1.2.1.17 |
| cempMemBufferPeakTime Indicates the time of most recent change in the peak
number of buffers (cempMemBufferPeak object) in the pool. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.221.1.1.2.1.18 |
| cempMemBufferTrim The number of buffers that have been trimmed from the
pool when the number of free buffers
(cempMemBufferFree) exceeded the number of max
allowed buffers(cempMemBufferMax). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.221.1.1.2.1.19 |
| cempMemBufferMemPoolIndex This index corresponds to the memory pool (with
cemMemPoolIndex as index in cempMemPoolTable)
from which buffers are allocated. | column | CempMemPoolIndex | .1.3.6.1.4.1.9.9.221.1.1.2.1.2 |
| cempMemBufferGrow The number of buffers that have been created in the
pool when the number of free buffers(cempMemBufferFree)
was less than minimum(cempMemBufferMix). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.221.1.1.2.1.20 |
| cempMemBufferFailures The number of failures to grant a buffer to a
requester due to reasons other than insufficient
memory. For example, in systems where there are
different execution contexts, it m… | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.221.1.1.2.1.21 |
| cempMemBufferNoStorage The number of times the system tried to create new
buffers, but could not due to insufficient free
memory in the system. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.9.9.221.1.1.2.1.22 |
| cempMemBufferName A textual name assigned to the buffer pool. This
object is suitable for output to a human operator,
and may also be used to distinguish among the various
buffer types.
For example… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.9.9.221.1.1.2.1.3 |
| cempMemBufferDynamic Boolean poolDynamic; if TRUE, the number of buffers
in the pool is adjusted (adding more packet buffers
or deleting excesses) dynamically by the background
process. If FALSE, th… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.221.1.1.2.1.4 |
| cempMemBufferMin Indicates the minimum number of free buffers
allowed in the buffer pool or low-water mark (lwm).
For example of its usage :
If cempMemBufferFree < cempMemBufferMin & pool is
dyn… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.221.1.1.2.1.6 |
| cempMemBufferMax Indicates the maximum number of free buffers
allowed in the buffer pool or high-water mark (hwm).
For example of its usage :
If cempMemBufferFree > cempMemBufferMax & pool is
dyn… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.221.1.1.2.1.7 |
| cempMemBufferPermanent Indicates the total number of permanent buffers in the
pool on the physical entity. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.221.1.1.2.1.8 |
| cempMemBufferTransient Indicates the initial number of temporary buffers
in the pool on the physical entity. This object
instructs the system to create this many number of
temporary extra buffers, just… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.221.1.1.2.1.9 |