cdeNodeInitPacingWindow

CISCO-DLSW-EXT-MIB · .1.3.6.1.4.1.9.9.74.1.2.8

Object

scalar r/w packets Integer32

Initial pacing window size.  This is the starting size of the
pacing window.  DLSw uses an adaptive pacing
flow control algorithm that automatically adjusts to congestion
levels in the network.  Pacing windows are used to control
how many packets may be sent to a peer before acknowlegement.

Context

MIB: CISCO-DLSW-EXT-MIB
OID: .1.3.6.1.4.1.9.9.74.1.2.8
Type: scalar
Access: readwrite
Status: current
Units: packets
Parent: cdeNode
Siblings: 21

Syntax

packets Integer32

Values & Constraints

Object Constraints

range: 1-2000

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cdeNodeTAddr The local peer IP address; required for Fast-Sequenced Transport (FST) and TCP. If no local peer IP address is configured then this object will be the empty string.	scalar	DLSW-MIBTAddress	`.1.3.6.1.4.1.9.9.74.1.2.1`
cdeNodePromiscuous This variable indicates if DLSw will accept connections from non-configured remote peers. Promiscuous routers will accept peer connection requests from routers that are not preco…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.74.1.2.10`
cdeNodePromPeerDefaultsCost This variable indicates the cost that will be used with promiscuous peers. If an end station can be reached through more than one peer, the cost of each peer will be considered wh…	scalar	Cost	`.1.3.6.1.4.1.9.9.74.1.2.11`
cdeNodePromPeerDefaultsDestMac Permits the promiscuous peer connection to be established only when there is an explorer frame destined for the specified 48-bit MAC address. If no default destination mac is co…	scalar	DLSW-MIBMacAddressNC	`.1.3.6.1.4.1.9.9.74.1.2.12`
cdeNodePromPeerDefaultsKeepaliveInterval Default promiscuous peer keepalive interval in seconds. The keepalive parameter refers to how often DLSw peers send peer keep alives to each other. These periodic messages allow …	scalar	Seconds KeepaliveInterval	`.1.3.6.1.4.1.9.9.74.1.2.13`
cdeNodePromPeerDefaultsLFSize The default Largest Frame Size associated with the default promiscuous peer transport connection. In other words its the largest size of the INFO field (including DLC header, not …	scalar	bytes DLSW-MIBLFSize	`.1.3.6.1.4.1.9.9.74.1.2.14`
cdeNodePromPeerDefaultsTCPQueueMax Default promiscuous peer maximum output TCP queue size. For DLSw over TCP encapsulation, packets may be queued due to congestion of the TCP network. This variable is used to set …	scalar	packets TCPQueueMax	`.1.3.6.1.4.1.9.9.74.1.2.15`
cdeNodePeerOnDemandDefaultsCost This variable indicates the cost that will be used with peer on demand peers. If an end station can be reached through more than one peer, the cost of each peer will be considered…	scalar	Cost	`.1.3.6.1.4.1.9.9.74.1.2.16`
cdeNodePeerOnDemandDefaultsFst This variable indicates if Fast-Sequenced Transport (FST) will be for peer on demand peers. True indicates that FST will be used, false indicates that it will not.	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.74.1.2.17`
cdeNodePeerOnDemandDefaultsInactivityInterval This variable indicates the length of time a peer on demand connection can be idle before shutting down this peer on demand connection. If set to zero, the peer on demand conne…	scalar	Minutes Integer32	`.1.3.6.1.4.1.9.9.74.1.2.18`
cdeNodePeerOnDemandDefaultsKeepaliveInterval Default peer on demand keepalive interval in seconds. The keepalive parameter refers to how often DLSw peers send peer keep alives to each other. These periodic messages allow DL…	scalar	Seconds KeepaliveInterval	`.1.3.6.1.4.1.9.9.74.1.2.19`
cdeNodeGroup Peer group number for this router. Peer groups are arbitrary groups of routers with one or more designated border peers. Border peers form peer connections with every router in t…	scalar	Integer32	`.1.3.6.1.4.1.9.9.74.1.2.2`
cdeNodePeerOnDemandDefaultsLFSize The default Largest Frame Size associated with the default peer on demand transport connections. In other words its the largest size of the INFO field (including DLC header, not i…	scalar	DLSW-MIBLFSize	`.1.3.6.1.4.1.9.9.74.1.2.20`
cdeNodePeerOnDemandDefaultsPriority This variable indicates if circuit prioritization will be used for peer-on-demand peers. True indicates that circuit prioritization specified by the dlswCircuitPriority object in…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.74.1.2.21`
cdeNodePeerOnDemandDefaultsTCPQueueMax Default peer-on-demand Maximum output TCP queue size. For DLSw over TCP encapsulation, packets may be queued due to congestion of the TCP network. This variable is used to set th…	scalar	packets TCPQueueMax	`.1.3.6.1.4.1.9.9.74.1.2.22`
cdeNodeBorder This variable indicates if this DLSw is capable of operating as a border peer. True indicates that it is capable, false indicates that it is not. Border peers form pee…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.74.1.2.3`
cdeNodeCost Peer cost advertised to remote peers in the capabilities exchange. If an end station can be reached through more than one peer, the cost of each peer will be considered when a c…	scalar	Cost	`.1.3.6.1.4.1.9.9.74.1.2.4`
cdeNodeKeepaliveInterval Default remote peer keepalive interval in seconds. The keepalive parameter refers to how often DLSw peers send peer keep alives to each other. These periodic messages allow DLSw…	scalar	Seconds KeepaliveInterval	`.1.3.6.1.4.1.9.9.74.1.2.5`
cdeNodePassiveConnect This variable indicates if DLSw will not initiate remote peer connections to configured peers. True indicates that it will not initiate remote peer connections, false indicates t…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.74.1.2.6`
cdeNodeBiuSegment This variable indicates if DLSw will spoof the maximum receivable Basic Information Unit (frame) size in XID so that each end station sends the largest frame it can. True indicat…	scalar	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.74.1.2.7`
cdeNodeMaxPacingWindow Maximum pacing window size. This is the largest size that the pacing window will grow to. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to conge…	scalar	packets Integer32	`.1.3.6.1.4.1.9.9.74.1.2.9`