cdeNodeGroup
CISCO-DLSW-EXT-MIB ·
.1.3.6.1.4.1.9.9.74.1.2.2
Object
scalar
r/w
Integer32
Peer group number for this router. Peer groups are arbitrary groups of routers with one or more designated border peers. Border peers form peer connections with every router in their group and with border peers in other groups. The role of a border peer is to forward explorers on behalf of other routers. A value of zero means no group has been set and the DLSw is not a group member.
Context
- MIB
- CISCO-DLSW-EXT-MIB
- OID
.1.3.6.1.4.1.9.9.74.1.2.2- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- cdeNode
- Siblings
- 21
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cdeNodeTAddr The local peer IP address; required for Fast-Sequenced
Transport (FST) and TCP. If no local peer IP address
is configured then this object will be the empty string. | scalar | DLSW-MIBTAddress | .1.3.6.1.4.1.9.9.74.1.2.1 |
| cdeNodePromiscuous This variable indicates if DLSw will accept connections from
non-configured remote peers. Promiscuous routers will
accept peer connection requests from routers that are
not preco… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.74.1.2.10 |
| cdeNodePromPeerDefaultsCost This variable indicates the cost that will be used with
promiscuous peers.
If an end station can be reached through more
than one peer, the cost of each peer will be considered wh… | scalar | Cost | .1.3.6.1.4.1.9.9.74.1.2.11 |
| cdeNodePromPeerDefaultsDestMac Permits the promiscuous peer connection to be established
only when there is an explorer frame destined for the
specified 48-bit MAC address. If no default destination mac
is co… | scalar | DLSW-MIBMacAddressNC | .1.3.6.1.4.1.9.9.74.1.2.12 |
| cdeNodePromPeerDefaultsKeepaliveInterval Default promiscuous peer keepalive interval in seconds.
The keepalive parameter refers to how often DLSw peers
send peer keep alives to each other. These periodic messages
allow … | scalar | Seconds KeepaliveInterval | .1.3.6.1.4.1.9.9.74.1.2.13 |
| cdeNodePromPeerDefaultsLFSize The default Largest Frame Size associated with the
default promiscuous peer transport connection.
In other words its the largest size of the INFO field
(including DLC header, not … | scalar | bytes DLSW-MIBLFSize | .1.3.6.1.4.1.9.9.74.1.2.14 |
| cdeNodePromPeerDefaultsTCPQueueMax Default promiscuous peer maximum output TCP queue size.
For DLSw over TCP encapsulation, packets may be queued
due to congestion of the TCP network. This variable
is used to set … | scalar | packets TCPQueueMax | .1.3.6.1.4.1.9.9.74.1.2.15 |
| cdeNodePeerOnDemandDefaultsCost This variable indicates the cost that will be used with
peer on demand peers.
If an end station can be reached through more
than one peer, the cost of each peer will be considered… | scalar | Cost | .1.3.6.1.4.1.9.9.74.1.2.16 |
| cdeNodePeerOnDemandDefaultsFst This variable indicates if Fast-Sequenced Transport (FST)
will be for peer on demand peers. True indicates that
FST will be used, false indicates that it will not. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.74.1.2.17 |
| cdeNodePeerOnDemandDefaultsInactivityInterval This variable indicates the length of time a peer on demand
connection can be idle before shutting down this peer
on demand connection. If set to zero, the peer on demand
conne… | scalar | Minutes Integer32 | .1.3.6.1.4.1.9.9.74.1.2.18 |
| cdeNodePeerOnDemandDefaultsKeepaliveInterval Default peer on demand keepalive interval in seconds.
The keepalive parameter refers to how often DLSw peers
send peer keep alives to each other. These periodic messages
allow DL… | scalar | Seconds KeepaliveInterval | .1.3.6.1.4.1.9.9.74.1.2.19 |
| cdeNodePeerOnDemandDefaultsLFSize The default Largest Frame Size associated with the
default peer on demand transport connections.
In other words its the largest size of the INFO field
(including DLC header, not i… | scalar | DLSW-MIBLFSize | .1.3.6.1.4.1.9.9.74.1.2.20 |
| cdeNodePeerOnDemandDefaultsPriority This variable indicates if circuit prioritization will be used
for peer-on-demand peers. True indicates that circuit
prioritization specified by the dlswCircuitPriority object
in… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.74.1.2.21 |
| cdeNodePeerOnDemandDefaultsTCPQueueMax Default peer-on-demand Maximum output TCP queue size.
For DLSw over TCP encapsulation, packets may be queued
due to congestion of the TCP network. This variable
is used to set th… | scalar | packets TCPQueueMax | .1.3.6.1.4.1.9.9.74.1.2.22 |
| cdeNodeBorder This variable indicates if this DLSw is capable of
operating as a border peer. True indicates that it is
capable, false indicates that it is not.
Border peers form pee… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.74.1.2.3 |
| cdeNodeCost Peer cost advertised to remote peers in the capabilities
exchange. If an end station can be reached through more
than one peer, the cost of each peer will be considered when
a c… | scalar | Cost | .1.3.6.1.4.1.9.9.74.1.2.4 |
| cdeNodeKeepaliveInterval Default remote peer keepalive interval in seconds.
The keepalive parameter refers to how often DLSw peers
send peer keep alives to each other. These periodic messages
allow DLSw… | scalar | Seconds KeepaliveInterval | .1.3.6.1.4.1.9.9.74.1.2.5 |
| cdeNodePassiveConnect This variable indicates if DLSw will not initiate
remote peer connections to configured peers. True
indicates that it will not initiate remote peer connections,
false indicates t… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.74.1.2.6 |
| cdeNodeBiuSegment This variable indicates if DLSw will spoof the maximum
receivable Basic Information Unit (frame) size in XID so that
each end station sends the largest frame it can. True indicat… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.74.1.2.7 |
| cdeNodeInitPacingWindow Initial pacing window size. This is the starting size of the
pacing window. DLSw uses an adaptive pacing
flow control algorithm that automatically adjusts to congestion
levels i… | scalar | packets Integer32 | .1.3.6.1.4.1.9.9.74.1.2.8 |
| cdeNodeMaxPacingWindow Maximum pacing window size. This is the largest size that
the pacing window will grow to. DLSw uses an adaptive pacing
flow control algorithm that automatically adjusts to conge… | scalar | packets Integer32 | .1.3.6.1.4.1.9.9.74.1.2.9 |