cctActiveCallingPartyId
CISCO-CALL-TRACKER-MIB ·
.1.3.6.1.4.1.9.9.163.1.2.3.1.23
Object
column
OctetString
The calling telephone number for this call.
For calls answered by the system, this corresponds to
the calling identification (CLID).
For calls originated by the system, this is the
number associated with the device.
For the interworking call, this object contains the
translated calling party number if there is a
translation rule is associated with dial plan for making
this outgoing call.
If not available this is a zero-length string.
Context
- MIB
- CISCO-CALL-TRACKER-MIB
- OID
.1.3.6.1.4.1.9.9.163.1.2.3.1.23- Type
- column
- Access
- readonly
- Status
- current
- Parent
- cctActiveEntry
- Table
- cctActiveTable
- Siblings
- 27
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-64
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cctActiveCallId Represents a Call Identifier.
The call identifier is a monotonically increasing
unsigned integer which uniquely identifies the call
within the system.
The Call ID i… | column | CctCallId | .1.3.6.1.4.1.9.9.163.1.2.3.1.1 |
| cctActiveUserIpAddr The IP address assigned to the cctActiveUserId for
this call or 0.0.0.0 if not applicable or unavailable. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.163.1.2.3.1.10 |
| cctActiveUserSubnetMask The IP subnet mask assigned to the cctActiveUserId for
this call or 0.0.0.0 if not applicable or unavailable. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.9.9.163.1.2.3.1.11 |
| cctActiveAccountingSessionId Accounting session identification assigned to this call
by AAA.
The session ID is sent by AAA to RADIUS as the
Acct-Session-Id attribute or TACACS+ as the task_id.
… | column | OctetString | .1.3.6.1.4.1.9.9.163.1.2.3.1.12 |
| cctActiveCallCategory The call category or type | column | CctCallCategory | .1.3.6.1.4.1.9.9.163.1.2.3.1.13 |
| cctActiveInitialRxRate Initial receive data rate for this call.
If call is a synchronous digital call such as ISDN sync,
this value is the data rate of the B-channel.
If call is asynchron… | column | bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.163.1.2.3.1.14 |
| cctActiveInitialTxRate Initial transmit data rate for this call.
If call is a synchronous digital call such as ISDN sync,
this value is the data rate of the B-channel.
If call is asynchro… | column | bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.163.1.2.3.1.15 |
| cctActiveResourceSlot Identification of the processing resource allocated to
the call.
In the case of a call requiring a modem resource, this
is the value of cmSlotIndex from CISCO-MODEM… | column | Integer32 | .1.3.6.1.4.1.9.9.163.1.2.3.1.16 |
| cctActiveResourcePort Identification of the processing resource allocated to
the call.
In the case of a call requiring a modem resource, this
is the value of cmPortIndex from CISCO-MODEM… | column | Integer32 | .1.3.6.1.4.1.9.9.163.1.2.3.1.17 |
| cctActiveEntrySlot The device slot containing the port on which the call
exists. | column | Integer32 | .1.3.6.1.4.1.9.9.163.1.2.3.1.18 |
| cctActiveEntryPort The physical port within the device slot on which the
call exists. | column | Integer32 | .1.3.6.1.4.1.9.9.163.1.2.3.1.19 |
| cctActiveSetupTime Value of sysUpTime when the call is first made known to
the system. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.163.1.2.3.1.2 |
| cctActiveEntryDs1 The DS1 link containing the call. This may be a DS1
contained within a larger grouping of multiple DS1s
within a single physical port.
If the physical port is of ty… | column | Integer32 | .1.3.6.1.4.1.9.9.163.1.2.3.1.20 |
| cctActiveEntryChannel The channel or timeslot within the cctActiveEntryDs1
allocated to the call. | column | Integer32 | .1.3.6.1.4.1.9.9.163.1.2.3.1.21 |
| cctActiveCalledPartyId The called telephone number for this call.
For calls answered by the system, this corresponds to
the Dialed Number Identification (DNIS).
For calls originated by th… | column | OctetString | .1.3.6.1.4.1.9.9.163.1.2.3.1.22 |
| cctActiveMpBundleId Multilink PPP bundle identification for call if
cctActiveServiceType has the value 'mp'.
If the value of cctActiveServiceType for this call is
not 'mp', then the va… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.163.1.2.3.1.24 |
| cctActiveChargedUnits The number of charged units for this connection.
For incoming calls or if charging information is
not supplied by the switch, the value of this object
will be zero. | column | DIAL-CONTROL-MIBAbsoluteCounter32 | .1.3.6.1.4.1.9.9.163.1.2.3.1.25 |
| cctActiveReceiveBytes The number of bytes received on the call. All the
'raw' bytes are counted including any protocol headers
which may or may not be present depending on the value
of cctActiveServic… | column | bytes DIAL-CONTROL-MIBAbsoluteCounter32 | .1.3.6.1.4.1.9.9.163.1.2.3.1.26 |
| cctActiveTransmitBytes The number of bytes transmitted on the call. All the
'raw' bytes are counted including any protocol headers
which may or may not be present depending on the value
of cctActiveSer… | column | bytes DIAL-CONTROL-MIBAbsoluteCounter32 | .1.3.6.1.4.1.9.9.163.1.2.3.1.27 |
| cctActiveCallSignalingType Signaling type used to setup the call. | column | CctCallSigType | .1.3.6.1.4.1.9.9.163.1.2.3.1.28 |
| cctActiveOrigin This object indicates how the call was created.
originate(1) - The call was initiated locally with
the system sending the setup request.
… | column | Enumeration | .1.3.6.1.4.1.9.9.163.1.2.3.1.3 |
| cctActiveConnectionTime Value of sysUpTime when the system connected the call. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.163.1.2.3.1.4 |
| cctActivePhysicalLayerReadyTime Value of sysUpTime when the physical layer for the call
achieved a steady state and the call is ready for higher
protocol layers to begin.
In the case of modem call… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.163.1.2.3.1.5 |
| cctActiveServiceUpTime Value of sysUpTime when the call service type identified
in cctActiveServiceType was established. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.163.1.2.3.1.6 |
| cctActiveServiceType Service associated with the call.
This is the highest level of service known to the system
for the call. The service represents the encapsulation
protocol layer act… | column | CctServiceType | .1.3.6.1.4.1.9.9.163.1.2.3.1.7 |
| cctActiveUserValidationTime Value of sysUpTime when the user identification
associated with this call was validated.
See cctActiveUserId for description of user
identification. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.163.1.2.3.1.8 |
| cctActiveUserId The User login ID or zero length string if unavailable. | column | OctetString | .1.3.6.1.4.1.9.9.163.1.2.3.1.9 |