CISCO-CALL-TRACKER-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
59

cctActiveTable

table
.1.3.6.1.4.1.9.9.163.1.2.3 · 1 row entry · 28 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cctActiveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CALL-TRACKER-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CALL-TRACKER-MIB::cctActiveTable' 
This table contains entries for active calls in the 
system. All such calls either originate or terminate
at this system.
          
The table is indexed by call ID assigned to the call.
cctActiveEntry row .1.3.6.1.4.1.9.9.163.1.2.3.1
The information regarding a single call.

Entries are created when a setup request is first
received by the system.

Entries are removed when a call is terminated or
rejected. A corresponding ent…
Indexes
Column Syntax OID
cctActiveCallId
Represents a Call Identifier.
The call identifier is a monotonically increasing
unsigned integer which uniquely identifies the call
within the system.

The Call ID is represented as an unsigned 32-bit
inte…
CctCallId
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.9.9.163.1.2.3.1.1
cctActiveSetupTime
Value of sysUpTime when the call is first made known to
the system.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.163.1.2.3.1.2
cctActiveOrigin
This object indicates how the call was created.

originate(1) - The call was initiated locally with
the system sending the setup request.
Dialout

answer(2) -…
Enumeration
Enumerated Values:
1originate
2answer
 .1.3.6.1.4.1.9.9.163.1.2.3.1.3
cctActiveConnectionTime
Value of sysUpTime when the system connected the call.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.163.1.2.3.1.4
cctActivePhysicalLayerReadyTime
Value of sysUpTime when the physical layer for the call
achieved a steady state and the call is ready for higher
protocol layers to begin.

In the case of modem calls, the physical layer for the
call achie…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.163.1.2.3.1.5
cctActiveServiceUpTime
Value of sysUpTime when the call service type identified
in cctActiveServiceType was established.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.163.1.2.3.1.6
cctActiveServiceType
Service associated with the call.

This is the highest level of service known to the system
for the call. The service represents the encapsulation
protocol layer active for the call.

In the …
CctServiceType
Type Values:
1none
2other
3slip
4ppp
5mp
6tcpClear
7telnet
8exec
9l2f
10l2tp
 .1.3.6.1.4.1.9.9.163.1.2.3.1.7
cctActiveUserValidationTime
Value of sysUpTime when the user identification
associated with this call was validated.

See cctActiveUserId for description of user
identification.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.163.1.2.3.1.8
cctActiveUserId
The User login ID or zero length string if unavailable.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.163.1.2.3.1.9
cctActiveUserIpAddr
The IP address assigned to the cctActiveUserId for
this call or 0.0.0.0 if not applicable or unavailable.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.163.1.2.3.1.10
cctActiveUserSubnetMask
The IP subnet mask assigned to the cctActiveUserId for
this call or 0.0.0.0 if not applicable or unavailable.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.163.1.2.3.1.11
cctActiveAccountingSessionId
Accounting session identification assigned to this call
by AAA.

The session ID is sent by AAA to RADIUS as the
Acct-Session-Id attribute or TACACS+ as the task_id.

If no accounting session …
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.163.1.2.3.1.12
cctActiveCallCategory
The call category or type
CctCallCategory
Type Values:
1none
2other
3modem
4isdnSync
5v110
6v120
7casDigital
8mgcpData
9syncData
10lapb-ta
 .1.3.6.1.4.1.9.9.163.1.2.3.1.13
cctActiveInitialRxRate
Initial receive data rate for this call.
If call is a synchronous digital call such as ISDN sync,
this value is the data rate of the B-channel.

If call is asynchronous, even if using a synchronous
transmi…
bits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.163.1.2.3.1.14
cctActiveInitialTxRate
Initial transmit data rate for this call.
If call is a synchronous digital call such as ISDN sync,
this value is the data rate of the B-channel.

If call is asynchronous, even if using a synchronous
transm…
bits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.163.1.2.3.1.15
cctActiveResourceSlot
Identification of the processing resource allocated to
the call.

In the case of a call requiring a modem resource, this
is the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB.

This value alo…
Integer32
Constraints:
range: -1-214783647
 .1.3.6.1.4.1.9.9.163.1.2.3.1.16
cctActiveResourcePort
Identification of the processing resource allocated to
the call.

In the case of a call requiring a modem resource, this
is the value of cmPortIndex from CISCO-MODEM-MGMT-MIB.

This value alo…
Integer32
Constraints:
range: -1-214783647
 .1.3.6.1.4.1.9.9.163.1.2.3.1.17
cctActiveEntrySlot
The device slot containing the port on which the call
exists.
Integer32
Constraints:
range: 0-214783647
 .1.3.6.1.4.1.9.9.163.1.2.3.1.18
cctActiveEntryPort
The physical port within the device slot on which the
call exists.
Integer32
Constraints:
range: 0-214783647
 .1.3.6.1.4.1.9.9.163.1.2.3.1.19
cctActiveEntryDs1
The DS1 link containing the call. This may be a DS1
contained within a larger grouping of multiple DS1s
within a single physical port.

If the physical port is of type DS1, this value is
identical to cctAc…
Integer32
Constraints:
range: 0-214783647
 .1.3.6.1.4.1.9.9.163.1.2.3.1.20
cctActiveEntryChannel
The channel or timeslot within the cctActiveEntryDs1
allocated to the call.
Integer32
Constraints:
range: 0-214783647
 .1.3.6.1.4.1.9.9.163.1.2.3.1.21
cctActiveCalledPartyId
The called telephone number for this call.
For calls answered by the system, this corresponds to
the Dialed Number Identification (DNIS).

For calls originated by the system, this is the
destination number…
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.9.9.163.1.2.3.1.22
cctActiveCallingPartyId
The calling telephone number for this call.
For calls answered by the system, this corresponds to
the calling identification (CLID).

For calls originated by the system, this is the
number associated with …
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.9.9.163.1.2.3.1.23
cctActiveMpBundleId
Multilink PPP bundle identification for call if
cctActiveServiceType has the value 'mp'.

If the value of cctActiveServiceType for this call is
not 'mp', then the value of this object is not
meaningful.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.163.1.2.3.1.24
cctActiveChargedUnits
The number of charged units for this connection.
For incoming calls or if charging information is
not supplied by the switch, the value of this object
will be zero.
DIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.9.163.1.2.3.1.25
cctActiveReceiveBytes
The number of bytes received on the call. All the
'raw' bytes are counted including any protocol headers
which may or may not be present depending on the value
of cctActiveServiceType.
bytesDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.9.163.1.2.3.1.26
cctActiveTransmitBytes
The number of bytes transmitted on the call. All the
'raw' bytes are counted including any protocol headers
which may or may not be present depending on the value
of cctActiveServiceType.
bytesDIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.9.163.1.2.3.1.27
cctActiveCallSignalingType
Signaling type used to setup the call.
CctCallSigType
Type Values:
1unknown
2external
3q931
4autoDetect
 .1.3.6.1.4.1.9.9.163.1.2.3.1.28

cctHistoryTable

table
.1.3.6.1.4.1.9.9.163.1.3.7 · 1 row entry · 31 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cctHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CALL-TRACKER-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CALL-TRACKER-MIB::cctHistoryTable' 
This table provides information on terminated calls.
cctHistoryEntry row .1.3.6.1.4.1.9.9.163.1.3.7.1
The information regarding a single terminated call.

An entry of this table is created when the system
initiates, detects, or is notified of a call
termination. Resources allocated to the call may
still be i…
Indexes
Column Syntax OID
cctHistoryIndex
A monotonically increasing integer for the sole purpose
of indexing terminated calls. When it reaches the
maximum value the agent wraps the value back to 1 and
will flush existing entries.
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.9.163.1.3.7.1.1
cctHistoryCallId
The call identifier for the call.
This is the same value assigned to the call in
cctActiveCallId when it was in the cctActiveTable.

It is possible for two cctHistoryEntry entries to have
the same cctHisto…
CctCallId
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.9.9.163.1.3.7.1.2
cctHistorySetupTime
Value of sysUpTime when the call was first made known to
the system.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.163.1.3.7.1.3
cctHistoryOrigin
This object indicates how the call was created.

originate(1) - The call was initiated locally with
the system sending the setup request.
Dialout

answer(2) -…
Enumeration
Enumerated Values:
1originate
2answer
 .1.3.6.1.4.1.9.9.163.1.3.7.1.4
cctHistoryConnectionTime
Value of sysUpTime when the system connected the call.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.163.1.3.7.1.5
cctHistoryPhysicalLayerReadyTime
Value of sysUpTime when the physical layer for the call
achieved a steady state and the call is ready for higher
protocol layers to begin.

In the case of modem calls, the physical layer for the
call achie…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.163.1.3.7.1.6
cctHistoryServiceUpTime
Value of sysUpTime when the call service type identified
in cctHistoryServiceType was established.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.163.1.3.7.1.7
cctHistoryServiceType
Service associated with the call.

This is the highest level of service known to the system
for the call. The service represents the encapsulation
protocol layer active for the call.

In the …
CctServiceType
Type Values:
1none
2other
3slip
4ppp
5mp
6tcpClear
7telnet
8exec
9l2f
10l2tp
 .1.3.6.1.4.1.9.9.163.1.3.7.1.8
cctHistoryUserValidationTime
Value of sysUpTime when the user identification
associated with this call was validated.

See cctHistoryUserId for description of user
identification.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.163.1.3.7.1.9
cctHistoryUserId
The User login ID or zero length string if unavailable.

If this contains a non-zero length string, and
cctHistoryUserValidationTime is zero, then the user
failed validation.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.163.1.3.7.1.10
cctHistoryUserIpAddr
The IP address assigned to the cctHistoryUserId for
this call or 0.0.0.0 if not applicable or unavailable.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.163.1.3.7.1.11
cctHistoryUserSubnetMask
The IP subnet mask assigned to the cctHistoryUserId for
this call or 0.0.0.0 if not applicable or unavailable.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.9.9.163.1.3.7.1.12
cctHistoryAccountingSessionId
Accounting session identification assigned to this call
by AAA.

The session ID is sent by AAA to RADIUS as the
Acct-Session-Id attribute or TACACS+ as the task_id.

If no accounting session …
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.163.1.3.7.1.13
cctHistoryCallCategory
The call category or type
CctCallCategory
Type Values:
1none
2other
3modem
4isdnSync
5v110
6v120
7casDigital
8mgcpData
9syncData
10lapb-ta
 .1.3.6.1.4.1.9.9.163.1.3.7.1.14
cctHistoryInitialRxRate
Initial receive data rate for this call.
If call is a synchronous digital call such as ISDN sync,
this value is the data rate of the B-channel.

If call is asynchronous, even if using a synchronous
transmi…
bits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.163.1.3.7.1.15
cctHistoryInitialTxRate
Initial transmit data rate for this call.
If call is a synchronous digital call such as ISDN sync,
this value is the data rate of the B-channel.

If call is asynchronous, even if using a synchronous
transm…
bits per secondSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.163.1.3.7.1.16
cctHistoryResourceSlot
Identification of processing resource allocated to call.

In the case of a call requiring a modem resource, this is
the value of cmSlotIndex from CISCO-MODEM-MGMT-MIB.

This value along with …
Integer32
Constraints:
range: -1-214783647
 .1.3.6.1.4.1.9.9.163.1.3.7.1.17
cctHistoryResourcePort
Identification of processing resource allocated to call.

In the case of a call requiring a modem resource, this is
the value of cmPortIndex from CISCO-MODEM-MGMT-MIB.

This value along with …
Integer32
Constraints:
range: -1-214783647
 .1.3.6.1.4.1.9.9.163.1.3.7.1.18
cctHistoryEntrySlot
The device slot containing the port on which the call
existed.
Integer32
Constraints:
range: 0-214783647
 .1.3.6.1.4.1.9.9.163.1.3.7.1.19
cctHistoryEntryPort
The physical port within the device slot on which the
call existed.
Integer32
Constraints:
range: 0-214783647
 .1.3.6.1.4.1.9.9.163.1.3.7.1.20
cctHistoryEntryDs1
The DS1 link containing the call. This may be a DS1
contained within a larger grouping of multiple DS1s
within a single physical port.

If the physical port is of type DS1, this value is
identical to cctAc…
Integer32
Constraints:
range: 0-214783647
 .1.3.6.1.4.1.9.9.163.1.3.7.1.22
cctHistoryEntryChannel
The channel or timeslot within the cctHistoryEntryDs1
which was allocated to the call.
Integer32
Constraints:
range: 0-214783647
 .1.3.6.1.4.1.9.9.163.1.3.7.1.23
cctHistoryCalledPartyId
The called telephone number for this call.
For calls answered by the system, this corresponds to
the Dialed Number Identification (DNIS).

For calls originated by the system, this is the
destination number…
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.9.9.163.1.3.7.1.24
cctHistoryCallingPartyId
The calling telephone number for this call.
For calls answered by the system, this corresponds to
the calling identification (CLID).

For calls originated by the system, this is the
number associated with …
OctetString
Constraints:
range: 0-64
 .1.3.6.1.4.1.9.9.163.1.3.7.1.25
cctHistoryMpBundleId
Multilink PPP bundle identification for call if
cctHistoryServiceType has the value 'mp'.

If the value of cctHistoryServiceType for this call is
not 'mp', then the value of this object is not
meaningful.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.163.1.3.7.1.26
cctHistoryChargedUnits
The number of charged units for this connection.
For incoming calls or if charging information is
not supplied by the switch, the value of this object
will be zero.
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.163.1.3.7.1.27
cctHistoryReceiveBytes
The number of bytes received on the call. All the
'raw' bytes are counted including any protocol headers
which may or may not be present depending on the value
of cctHistoryServiceType.
bytesSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.163.1.3.7.1.28
cctHistoryTransmitBytes
The number of bytes transmitted on the call. All the
'raw' bytes are counted including any protocol headers
which may or may not be present depending on the value
of cctHistoryServiceType.
bytesSNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.163.1.3.7.1.29
cctHistoryDisconnectTime
Value of sysUpTime when call was disconnected.

This is when the system initiates, detects, or is
notified of call termination.

This is the call duration from initial setup request.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.163.1.3.7.1.30
cctHistoryDisconnectReasonText
Text description of the disconnect reason provided.

Value is zero-length string if no text is available.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.163.1.3.7.1.31
cctHistoryCallSignalingType
Signaling type used to setup the call.
CctCallSigType
Type Values:
1unknown
2external
3q931
4autoDetect
 .1.3.6.1.4.1.9.9.163.1.3.7.1.32