ccwbRFChannelWidth

CISCO-CABLE-WIDEBAND-MIB · .1.3.6.1.4.1.9.9.479.1.1.1.3
Commands MIB view Table view

Object

column r/w hertzUnsigned32 
The bandwidth of this downstream RF channel. Most
implementations are expected to support a channel width
of 6 MHz (North America) and/or 8 MHz (Europe).
See the associated compliance object for a description of
the valid channel widths for this object.

Context

MIB
CISCO-CABLE-WIDEBAND-MIB
OID
.1.3.6.1.4.1.9.9.479.1.1.1.3
Type
column
Access
readwrite
Status
current
Units
hertz
Parent
ccwbRFChannelEntry
Groups
2

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CABLE-WIDEBAND-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CABLE-WIDEBAND-MIB::ccwbRFChannelWidth'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'CISCO-CABLE-WIDEBAND-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CABLE-WIDEBAND-MIB::ccwbRFChannelWidth.<entPhysicalIndex>.<ccwbRFChannelNum>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-CABLE-WIDEBAND-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-CABLE-WIDEBAND-MIB::ccwbRFChannelWidth'

Syntax

hertzUnsigned32

Values & Constraints

Object Constraints
range: 0-16000000

Conformance

Member of
ccwbWidebandObjGroup ccwbWidebandObjGroupRev1
Compliance refinements
ciscoCableWidebandMIBCompliance readonly
It is conformant to implement this object as read-only.
The value of 6 MHz is appropriate for cable
plants running under NTSC (National Television
Standards Committee) standards. The value of 8 MHz is
appropriate for cable plants running under ETSI
standards.
ciscoCableWidebandMIBComplianceRev1 readonly
It is conformant to implement this object as read-only.
The value of 6 MHz is appropriate for cable
plants running under NTSC (National Television
Standards Committee) standards. The value of 8 MHz is
appropriate for cable plants running under ETSI
standards.
ciscoCableWidebandMIBComplianceRev2 readonly
Write access is not required.
An implementation is only required to
support 6000000 and 8000000.

It is conformant to implement this object as read-only.
The value of 6 MHz is appropriate for cable
plants running under NTSC (National Television
Standards Committee) standards. The value of 8 MHz is
appropriate for cable plants running under ETSI
standards.
ciscoCableWidebandMIBComplianceRev3 readonly
Write access is not required.
An implementation is only required to
support 6000000 and 8000000.

It is conformant to implement this object as read-only.
The value of 6 MHz is appropriate for cable
plants running under NTSC (National Television
Standards Committee) standards. The value of 8 MHz is
appropriate for cable plants running under ETSI
standards.