ccwbRFChannelRowStatus
CISCO-CABLE-WIDEBAND-MIB ·
.1.3.6.1.4.1.9.9.479.1.1.1.8
Object
Controls and reflects the status of rows in this table.
It can be used for creating and deleting
entries in this table.
The ccwbRFChannelAnnex and ccwbRFChannelModulation must
be valid for a row to be created.
Context
- MIB
- CISCO-CABLE-WIDEBAND-MIB
- OID
.1.3.6.1.4.1.9.9.479.1.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ccwbRFChannelEntry
- Table
- ccwbRFChannelTable
- Siblings
- 9
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ccwbRFChannelNum The WCMTS identification of the RF channel.
The range of this object is limited to 0-18 in the
case of annex A/256qam, and 0-23 for Annex B and C. | column | Unsigned32 | .1.3.6.1.4.1.9.9.479.1.1.1.1 |
| ccwbRFChannelFrequencyRev1 The center of the downstream frequency associated with
this RF channel. The final downstream RF frequency
may be provided by an edge QAM device or the CMTS itself.
See the associa… | column | hertz Unsigned32 | .1.3.6.1.4.1.9.9.479.1.1.1.10 |
| ccwbRFChannelFrequency deprecated The center of the downstream frequency associated with
this RF channel. The final downstream RF frequency
may be provided by an edge QAM device or the CMTS itself.
See the associa… | column | hertz Unsigned32 | .1.3.6.1.4.1.9.9.479.1.1.1.2 |
| ccwbRFChannelWidth The bandwidth of this downstream RF channel. Most
implementations are expected to support a channel width
of 6 MHz (North America) and/or 8 MHz (Europe).
See the associated compli… | column | hertz Unsigned32 | .1.3.6.1.4.1.9.9.479.1.1.1.3 |
| ccwbRFChannelModulation The modulation type associated with this downstream RF
channel. See the associated conformance object for write
conditions an limitations. See the DOCSIS specification
for specifi… | column | Enumeration | .1.3.6.1.4.1.9.9.479.1.1.1.4 |
| ccwbRFChannelAnnex The value of this object indicates the conformance of
the implementation to important regional cable standards.
annexA : Annex A from ITU-J83 is used.
annexB : Annex B from ITU-J8… | column | Enumeration | .1.3.6.1.4.1.9.9.479.1.1.1.5 |
| ccwbRFChannelMpegPkts The number of MPEG packets transmitted on this RF
channel. | column | Packets SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.9.479.1.1.1.6 |
| ccwbRFChannelStorageType The storage type for this conceptual row. | column | SNMPv2-TCStorageType | .1.3.6.1.4.1.9.9.479.1.1.1.7 |
| ccwbRFChannelUtilization The calculated and truncated utilization for
this RF channel over the previous complete measuring
interval. The configured duration of the measurement
intervals is defined in the … | column | percent Unsigned32 | .1.3.6.1.4.1.9.9.479.1.1.1.9 |