ccwbRFChannelFrequencyRev1

CISCO-CABLE-WIDEBAND-MIB · .1.3.6.1.4.1.9.9.479.1.1.1.10
Commands MIB view Table view

Object

column r/w hertzUnsigned32 
The center of the downstream frequency associated with
this RF channel. The final downstream RF frequency
may be provided by an edge QAM device or the CMTS itself.
See the associated compliance object for a description of
valid frequencies that may be written to this object.

Context

MIB
CISCO-CABLE-WIDEBAND-MIB
OID
.1.3.6.1.4.1.9.9.479.1.1.1.10
Type
column
Access
readwrite
Status
current
Units
hertz
Parent
ccwbRFChannelEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CABLE-WIDEBAND-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CABLE-WIDEBAND-MIB::ccwbRFChannelFrequencyRev1'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'CISCO-CABLE-WIDEBAND-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CABLE-WIDEBAND-MIB::ccwbRFChannelFrequencyRev1.<entPhysicalIndex>.<ccwbRFChannelNum>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-CABLE-WIDEBAND-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-CABLE-WIDEBAND-MIB::ccwbRFChannelFrequencyRev1'

Syntax

hertzUnsigned32

Values & Constraints

Object Constraints
range: 55000000-1050000000

Conformance

Member of
ccwbWidebandObjGroupRev1
Compliance refinements
ciscoCableWidebandMIBComplianceRev2 readonly
Write access is not required.

A range of 54MHz to 860MHz is appropriate for a cable
plant using a North American Sub-Split channel plan.
The spectrum range has been expanded to accommodate
a lower edge of 47MHz and an upper edge of 862MHz
for some European channel plans.
ciscoCableWidebandMIBComplianceRev3 readonly
Write access is not required.

A range of 54MHz to 860MHz is appropriate for a cable
plant using a North American Sub-Split channel plan.
The spectrum range has been expanded to accommodate
a lower edge of 47MHz and an upper edge of 862MHz
for some European channel plans.