ciscoatmSigSupportBlliRepeatInd

CISCO-ATM2-MIB · .1.3.6.1.4.1.9.10.23.1.2.1.6
Commands MIB view Table view

Object

column r/w Enumeration 
This object indicates whether to accept, transfer, and
deliver the Broadband Repeat Indicator with two or
three instances of the Broadband Low Layer Information
Element for low layer information selection from the
calling party to the called party.  This object shall
only be transferred if atmSigSupportLoLyrInfo =
'enabled(1)'.  The value of this object can be:
  - enabled(1)  This Information Element is transferred
                to the called party
  - disabled(2) This Information Element is NOT
                transferred to the called party.

Context

MIB
CISCO-ATM2-MIB
OID
.1.3.6.1.4.1.9.10.23.1.2.1.6
Type
column
Access
readwrite
Status
current
Parent
ciscoatmSigSupportEntry
Groups
1

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM2-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM2-MIB::ciscoatmSigSupportBlliRepeatInd'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'CISCO-ATM2-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM2-MIB::ciscoatmSigSupportBlliRepeatInd.<ifIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-ATM2-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-ATM2-MIB::ciscoatmSigSupportBlliRepeatInd'

Syntax

Enumeration

Values & Constraints

Enumerated Values
1enabled
2disabled

Conformance

Member of
ciscoAtmSwitchServcGroup
Compliance refinements
ciscoatm2MIBCompliance readonly
Write access is not required. This parameter is
required for ATM systems that support only a value of
'disabled(2)' (i.e., the ATM systems does not support
the feature associated with the parameter).
ciscoatm2MIBCompliance2 readonly
Write access is not required. This parameter is
required for ATM systems that support only a value of
'disabled(2)' (i.e., the ATM systems does not support
the feature associated with the parameter).