Standard view Table view

CISCO-ATM2-MIB

        This MIB Module is a supplement to the
ATM-MIB [1]. It is an adaptation of a 
	portion of the ATOMMIB supplemental MIB.

Source file: CISCO-ATM2-MIB
Last revised: 4 Mar 1998, 00:00 UTC
Identity: ciscoAtm2MIB
Base OID: 1.3.6.1.4.1.9.10.23

Imported Objects

ATM-MIB	atmInterfaceConfEntry
CISCO-SMI	ciscoExperiment
IF-MIB	ifIndex
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	Counter32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)

Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-ATM2-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-ATM2-MIB::ciscoAtm2MIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM2-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM2-MIB::ciscoAtm2MIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (45)

ciscoAtm2MIB		`.1.3.6.1.4.1.9.10.23`
ciscoatm2MIBObjects		`.1.3.6.1.4.1.9.10.23.1`
ciscoatmSigStatTable		`.1.3.6.1.4.1.9.10.23.1.1`
ciscoatmSigStatEntry	IF-MIBifIndex	`.1.3.6.1.4.1.9.10.23.1.1.1`
ciscoatmSigEmitUnavailRoutes	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.10`
ciscoatmSigDetectUnavailResrcs	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.11`
ciscoatmSigEmitUnavailResrcs	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.12`
ciscoatmSigDetectCldPtyEvents	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.13`
ciscoatmSigEmitCldPtyEvents	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.14`
ciscoatmSigDetectMsgErrors	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.15`
ciscoatmSigEmitMsgErrors	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.16`
ciscoatmSigDetectClgPtyEvents	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.17`
ciscoatmSigEmitClgPtyEvents	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.18`
ciscoatmSigDetectTimerExpireds	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.19`
ciscoatmSigEmitTimerExpireds	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.20`
ciscoatmSigDetectRestarts	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.21`
ciscoatmSigEmitRestarts	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.22`
ciscoatmSigInEstabls	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.23`
ciscoatmSigOutEstabls	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.24`
ciscoatmSigSSCOPConEvents	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.5`
ciscoatmSigSSCOPErrdPdus	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.6`
ciscoatmSigDetectSetupAttempts	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.7`
ciscoatmSigEmitSetupAttempts	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.8`
ciscoatmSigDetectUnavailRoutes	SNMPv2-SMICounter32	`.1.3.6.1.4.1.9.10.23.1.1.1.9`
ciscoatmSigSupportTable		`.1.3.6.1.4.1.9.10.23.1.2`
ciscoatmSigSupportEntry	IF-MIBifIndex	`.1.3.6.1.4.1.9.10.23.1.2.1`
ciscoatmSigSupportClgPtyNumDel r/w	Enumeration	`.1.3.6.1.4.1.9.10.23.1.2.1.1`
ciscoatmSigSupportClgPtySubAddr r/w	Enumeration	`.1.3.6.1.4.1.9.10.23.1.2.1.2`
ciscoatmSigSupportCldPtySubAddr r/w	Enumeration	`.1.3.6.1.4.1.9.10.23.1.2.1.3`
ciscoatmSigSupportHiLyrInfo r/w	Enumeration	`.1.3.6.1.4.1.9.10.23.1.2.1.4`
ciscoatmSigSupportLoLyrInfo r/w	Enumeration	`.1.3.6.1.4.1.9.10.23.1.2.1.5`
ciscoatmSigSupportBlliRepeatInd r/w	Enumeration	`.1.3.6.1.4.1.9.10.23.1.2.1.6`
ciscoatmSigSupportAALInfo r/w	Enumeration	`.1.3.6.1.4.1.9.10.23.1.2.1.7`
ciscoatmSigSupportUnknownIe r/w	Enumeration	`.1.3.6.1.4.1.9.10.23.1.2.1.8`
ciscoatmInterfaceExtTable		`.1.3.6.1.4.1.9.10.23.1.3`
ciscoatmInterfaceExtEntry		`.1.3.6.1.4.1.9.10.23.1.3.1`
ciscoatmInterfaceConfMaxSvpcVpi r/w	Integer32	`.1.3.6.1.4.1.9.10.23.1.3.1.16`
ciscoatmInterfaceCurrentMaxSvpcVpi	Integer32	`.1.3.6.1.4.1.9.10.23.1.3.1.17`
ciscoatmInterfaceConfMaxSvccVpi r/w	Integer32	`.1.3.6.1.4.1.9.10.23.1.3.1.18`
ciscoatmInterfaceCurrentMaxSvccVpi	Integer32	`.1.3.6.1.4.1.9.10.23.1.3.1.19`
ciscoatmInterfaceConfMinSvccVci r/w	Integer32	`.1.3.6.1.4.1.9.10.23.1.3.1.20`
ciscoatmInterfaceCurrentMinSvccVci	Integer32	`.1.3.6.1.4.1.9.10.23.1.3.1.21`
ciscoatm2MIBConformance		`.1.3.6.1.4.1.9.10.23.3`
ciscoatm2MIBGroups		`.1.3.6.1.4.1.9.10.23.3.1`
ciscoatm2MIBCompliances		`.1.3.6.1.4.1.9.10.23.3.2`

Dependencies (9) 5 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

CISCO-ATM2-MIBciscoselected
- ATM-MIBrfcdefault fallback1 symbol
  - ATM-TC-MIBrfc11 symbols
    - SNMPv2-SMIrfc4 symbols
    - SNMPv2-TCrfc1 symbol
      - SNMPv2-SMIrfcshared1 symbol
  - IF-MIBrfc2 symbols
    - IANAifType-MIBrfc1 symbol
      - SNMPv2-SMIrfcshared2 symbols
      - SNMPv2-TCrfcshared1 symbol
    - SNMPv2-CONFrfc3 symbols
      - SNMPv2-SMIrfcshared3 symbols
    - SNMPv2-MIBrfc1 symbol
      - SNMPv2-CONFrfcshared3 symbols
      - SNMPv2-SMIrfcshared7 symbols
      - SNMPv2-TCrfcshared3 symbols
    - SNMPv2-SMIrfcshared9 symbols
    - SNMPv2-TCrfcshared8 symbols
  - SNMPv2-CONFrfcshared2 symbols
  - SNMPv2-SMIrfcshared6 symbols
  - SNMPv2-TCrfcshared3 symbols
- CISCO-SMIcisco1 symbol
  - SNMPv2-SMIrfcdefault fallbackshared3 symbols
- IF-MIBrfcdefault fallbackshared1 symbol
- SNMPv2-CONFrfcdefault fallbackshared2 symbols
- SNMPv2-SMIrfcdefault fallbackshared3 symbols

Dependency-first compile order

Conformance Groups (3)

ciscoAtmSwitchServcHostGroup	ciscoatmSigSSCOPConEvents ciscoatmSigSSCOPErrdPdus ciscoatmSigDetectSetupAttempts ciscoatmSigEmitSetupAttempts ciscoatmSigDetectUnavailRoutes ciscoatmSigEmitUnavailRoutes ciscoatmSigDetectUnavailResrcs ciscoatmSigEmitUnavailResrcs ciscoatmSigDetectCldPtyEvents ciscoatmSigEmitCldPtyEvents ciscoatmSigDetectMsgErrors ciscoatmSigEmitMsgErrors ciscoatmSigDetectClgPtyEvents ciscoatmSigEmitClgPtyEvents ciscoatmSigDetectTimerExpireds ciscoatmSigEmitTimerExpireds ciscoatmSigDetectRestarts ciscoatmSigEmitRestarts ciscoatmSigInEstabls ciscoatmSigOutEstabls A collection of objects providing information for a Switch/Service/Host that implements ATM interfaces.	`.1.3.6.1.4.1.9.10.23.3.1.1`
ciscoAtmSwitchServcGroup	ciscoatmSigSupportClgPtyNumDel ciscoatmSigSupportClgPtySubAddr ciscoatmSigSupportCldPtySubAddr ciscoatmSigSupportHiLyrInfo ciscoatmSigSupportLoLyrInfo ciscoatmSigSupportBlliRepeatInd ciscoatmSigSupportAALInfo ciscoatmSigSupportUnknownIe A collection of objects providing information for a Switch/Service that implements ATM interfaces.	`.1.3.6.1.4.1.9.10.23.3.1.3`
ciscoAtmSwitchServcHostGroup2	ciscoatmInterfaceConfMaxSvpcVpi ciscoatmInterfaceCurrentMaxSvpcVpi ciscoatmInterfaceConfMaxSvccVpi ciscoatmInterfaceCurrentMaxSvccVpi ciscoatmInterfaceConfMinSvccVci ciscoatmInterfaceCurrentMinSvccVci A collection of objects providing information regarding VPI/VCI range for SVCCs and SVPCs for a Switch/Service/Host that implements ATM interfaces.	`.1.3.6.1.4.1.9.10.23.3.1.4`

Compliance Statements (2)

OID .1.3.6.1.4.1.9.10.23.3.2.1

The compliance statement for SNMP entities which
represent ATM interfaces. The compliance statements
are used to determine if a particular group or object
applies to hosts, networks/switches, or both.

Required groups

mandatory	ciscoAtmSwitchServcHostGroup
optional	ciscoAtmSwitchServcGroup	This group is mandatory for a Switch/Service that implements ATM interfaces.

Object refinements

Object	Access	Description
ciscoatmSigSupportClgPtyNumDel	readonly	Write access is not required. This parameter is required for ATM systems that support only a value of 'disabled(2)' (i.e., the ATM systems does not support the feature associated with the parameter).
ciscoatmSigSupportClgPtySubAddr	readonly	Write access is not required. This parameter is required for ATM systems that support only a value of 'disabled(2)' (i.e., the ATM systems does not support the feature associated with the parameter).
ciscoatmSigSupportCldPtySubAddr	readonly	Write access is not required. This parameter is required for ATM systems that support only a value of 'disabled(2)' (i.e., the ATM systems does not support the feature associated with the parameter).
ciscoatmSigSupportHiLyrInfo	readonly	Write access is not required. This parameter is required for ATM systems that support only a value of 'disabled(2)' (i.e., the ATM systems does not support the feature associated with the parameter).
ciscoatmSigSupportLoLyrInfo	readonly	Write access is not required. This parameter is required for ATM systems that support only a value of 'disabled(2)' (i.e., the ATM systems does not support the feature associated with the parameter).
ciscoatmSigSupportBlliRepeatInd	readonly	Write access is not required. This parameter is required for ATM systems that support only a value of 'disabled(2)' (i.e., the ATM systems does not support the feature associated with the parameter).
ciscoatmSigSupportAALInfo	readonly	Write access is not required. This parameter is required for ATM systems that support only a value of 'disabled(2)' (i.e., the ATM systems does not support the feature associated with the parameter).

OID .1.3.6.1.4.1.9.10.23.3.2.2