casfVcEndptClpMode
CISCO-ATM-SWITCH-FR-IWF-MIB ·
.1.3.6.1.4.1.9.9.112.1.2.1.1.8
Object
column
r/w
Enumeration
Specifies how to map from Discard Eligibility (DE)
bit on the Frame Relay side to Congestion Loss
Priority (CLP) bit on the ATM side.
For network interworking, clpIfDe(1) corresponds to
Mode 1 as defined in FRF.5, section
4.4.1. clpIsZero(2) and clpIsOne(3) correspond to
Mode 2 as defined in FRF.5, section 4.4.1.
For service interworking, clpIfDe(1) corresponds to
Mode 1 as defined in FRF.8, section
4.2.1. clpIsZero(2) and clpIsOne(3) correspond to
Mode 2 as defined in FRF.8, section 4.2.1.
Context
- MIB
- CISCO-ATM-SWITCH-FR-IWF-MIB
- OID
.1.3.6.1.4.1.9.9.112.1.2.1.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- casfVcEndptEntry
- Table
- casfVcEndptTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | clpIfDe |
2 | clpIsZero |
3 | clpIsOne |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| casfVcEndptDlci The value of the Data Link Connection Identifier (DLCI)
which identifies this connection end-point. | column | DlciValue | .1.3.6.1.4.1.9.9.112.1.2.1.1.1 |
| casfVcEndptEfciMode Specifies how to map from FECN field in the Frame
Relay PDU to the EFCI field in ATM cells, in case of
service interworking. This object does not apply to
network interworking.
… | column | Enumeration | .1.3.6.1.4.1.9.9.112.1.2.1.1.10 |
| casfVcEndptUpcMode Specifies the action taken by Usage Parameter Control
(UPC) at the ingress port. | column | Enumeration | .1.3.6.1.4.1.9.9.112.1.2.1.1.11 |
| casfVcEndptSpvcRemoteAddr The ATM address of the remote end of the soft VC.
The value can be set prior to the row becoming
'active', and if the value of casfVcEndptConnKind is
spvcInitiator(4). The agent w… | column | AtmAddr | .1.3.6.1.4.1.9.9.112.1.2.1.1.12 |
| casfVcEndptSpvcRemoteType The type of the remote end of the soft VC.
This object is instantiated only if the value of
casfVcEndptConnKind is spvcInitiator(4) or
spvcTarget(5). The agent wil… | column | Enumeration | .1.3.6.1.4.1.9.9.112.1.2.1.1.13 |
| casfVcEndptSpvcRemoteDlci The DLCI value to be used at the remote end of the
soft VC. The value can be set prior to the row
becoming 'active', and if the value of
casfVcEndptConnKind is spvcInitiator(4), … | column | DlciValue | .1.3.6.1.4.1.9.9.112.1.2.1.1.14 |
| casfVcEndptSpvcRemoteVpi The VPI value to be used at the remote end of the
soft VC. The value can be set prior to the row
becoming 'active', and if the value of
casfVcEndptConnKind is spvcInitiator(4), a… | column | Integer32 | .1.3.6.1.4.1.9.9.112.1.2.1.1.15 |
| casfVcEndptSpvcRemoteVci The VCI value to be used at the remote end of the
soft VC. The value can be set prior to the row
becoming 'active', and if the value of
casfVcEndptConnKind is spvcInitiator(4), a… | column | Integer32 | .1.3.6.1.4.1.9.9.112.1.2.1.1.16 |
| casfVcEndptCreationTime The time when this row was created. | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.9.9.112.1.2.1.1.17 |
| casfVcEndptRcvdSigStatus The value of this object identifies the PVC status
received via the local in-channel signaling
procedures for this PVC end-point. This object is
only pertinent for interfaces that… | column | Enumeration | .1.3.6.1.4.1.9.9.112.1.2.1.1.18 |
| casfVcEndptRowStatus Used to create, modify or delete this row. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.9.9.112.1.2.1.1.19 |
| casfVcEndptRxTrafficDescrRow Identifies the entry in the casfTrafficDescrTable
which applies to the receive direction at this
connection end-point.
For connections that negotiate traffic parame… | column | CasfTrafficDescrRow | .1.3.6.1.4.1.9.9.112.1.2.1.1.2 |
| casfVcSignalStandardCalledIe Specifies whether or not to signal the standard (from
the ATM-Forum PNNI Soft PVC Addendum) format of the
Called Soft PVC IE, as opposed to the proprietary
encoding we have use… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.9.9.112.1.2.1.1.20 |
| casfVcEndptTxTrafficDescrRow Identifies the entry in the casfTrafficDescrTable
which applies to the transmit direction at this
connection end-point.
For connections that negotiate traffic param… | column | CasfTrafficDescrRow | .1.3.6.1.4.1.9.9.112.1.2.1.1.3 |
| casfVcEndptRxNegTrafficDescrRow Identifies the entry in the casfTrafficDescrTable
which contains negotiated traffic parameters applied
to the receive direction of this connection
end-point.
This… | column | CasfTrafficDescrRow | .1.3.6.1.4.1.9.9.112.1.2.1.1.4 |
| casfVcEndptTxNegTrafficDescrRow Identifies the entry in the casfTrafficDescrTable
which contains negotiated traffic parameters applied
to the transmit direction of this connection
endpoint.
This o… | column | CasfTrafficDescrRow | .1.3.6.1.4.1.9.9.112.1.2.1.1.5 |
| casfVcEndptConnKind The connection kind. The value can be set prior to
the row becoming 'active'.
To create a pvc connection endpoint, set this value to
pvc(1).
To crea… | column | ConnectionKind | .1.3.6.1.4.1.9.9.112.1.2.1.1.6 |
| casfVcEndptIwfType The type of the interworking function. The value can
be set prior to the row becoming 'active'. | column | Enumeration | .1.3.6.1.4.1.9.9.112.1.2.1.1.7 |
| casfVcEndptDeMode Specifies how to map from Congestion Loss Priority
(CLP) bit on the ATM side to Discard Eligibility (DE)
bit on the Frame Relay side.
See the Frame Relay Forum spec… | column | Enumeration | .1.3.6.1.4.1.9.9.112.1.2.1.1.9 |