ciscoAtmIfPhysFramingMode

The framing format present on the physical interface.
              
'sonet' indicates sts-3c or sts-12c format and applies only
to OC-3 and OC-12 type interfaces, respectively.
              
'sdh' indicates stm1 or stm4 format and applies only to
OC-3 and OC-12 type interfaces, respectively.
              
'ds3m23adm' indicates M23 ADM mode and applies only to DS3
type interfaces.
              
'ds3m23plcp' indicates M23 PLCP mode and applies only to DS3
type interfaces.
              
'ds3cbitadm' indicates C-BIT ADM mode and applies only to DS3
type interfaces.
              
'ds3cbitplcp' indicates C-BIT PLCP mode and applies only to DS3
type interfaces.
              
'e3g832adm' indicates G.832 ADM mode and applies only to E3
type interfaces.
              
'e3g751adm' indicates G.751 ADM mode and applies only to E3
type interfaces.
              
'e3g751plcp' indicates G.751 PLCP mode and applies only to E3
type interfaces.
              
'ds1sfadm' indicates DS1 SF ADM mode and applies only to DS1
type interfaces.
              
'ds1esfadm' indicates DS1 ESF ADM mode and applies only to DS1
type interfaces.
              
'ds1sfplcp' indicates DS1 SF PLCP mode and applies only to DS1
type interfaces.
              
'ds1esfplcp' indicates DS1 ESF PLCP mode and applies only to DS1
type interfaces.
              
'e1adm' indicates E1 ADM mode and applies only to E1
type interfaces.
              
'e1plcp' indicates E1 PLCP mode and applies only to E1
type interfaces.
              
'e1crcadm' indicates E1 CRC-4 ADM mode and applies only to E1
type interfaces.
              
'e1crcplcp' indicates E1 CRC-4 PLCP mode and applies only to E1
type interfaces.

MIB

CISCO-ATM-IF-PHYS-MIB

OID

.1.3.6.1.4.1.9.9.45.1.1.1.13

Type

column

Access

readwrite

Status

current

Parent

ciscoAtmIfPhysEntry