Standard view Table view

CISCO-ATM-IF-PHYS-MIB

        A minimal set of managed objects for tracking
the status of DS3/E3/DS1/E1 and SONET interfaces.
Source file
CISCO-ATM-IF-PHYS-MIB
Last revised
Identity
ciscoAtmIfPhysMIB
Base OID
1.3.6.1.4.1.9.9.45
Imported Objects
CISCO-SMI ciscoMgmt
RFC1213-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI Counter32 MODULE-IDENTITY OBJECT-TYPE
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-ATM-IF-PHYS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM-IF-PHYS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM-IF-PHYS-MIB::ciscoAtmIfPhysMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (28)
ciscoAtmIfPhysMIB
.1.3.6.1.4.1.9.9.45
ciscoAtmIfPhysMIBObjects
.1.3.6.1.4.1.9.9.45.1
ciscoAtmIfPhysTable
.1.3.6.1.4.1.9.9.45.1.1
ciscoAtmIfPhysEntry
RFC1213-MIBifIndex
 .1.3.6.1.4.1.9.9.45.1.1.1
ciscoAtmIfPhysStatus
Enumeration
 .1.3.6.1.4.1.9.9.45.1.1.1.1
ciscoAtmIfPhysPathFebeErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.45.1.1.1.10
ciscoAtmIfPhysCellPayloadScrambling r/w
Enumeration
 .1.3.6.1.4.1.9.9.45.1.1.1.11
ciscoAtmIfPhysStsStreamScrambling r/w
Enumeration
 .1.3.6.1.4.1.9.9.45.1.1.1.12
ciscoAtmIfPhysFramingMode r/w
Enumeration
 .1.3.6.1.4.1.9.9.45.1.1.1.13
ciscoAtmIfPhysLoopbackConfig r/w
Enumeration
 .1.3.6.1.4.1.9.9.45.1.1.1.14
ciscoAtmIfPhysLineBuildOut r/w
Enumeration
 .1.3.6.1.4.1.9.9.45.1.1.1.15
ciscoAtmIfPhysTransmitClockSource r/w
Enumeration
 .1.3.6.1.4.1.9.9.45.1.1.1.16
ciscoAtmIfPhysClockSourcePriority r/w
Enumeration
 .1.3.6.1.4.1.9.9.45.1.1.1.17
ciscoAtmIfPhysClockSourceStatus
Enumeration
 .1.3.6.1.4.1.9.9.45.1.1.1.18
ciscoAtmIfPhysDS1BitErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.45.1.1.1.19
ciscoAtmIfPhysSectionParityErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.45.1.1.1.2
ciscoAtmIfPhysE1CrcErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.45.1.1.1.20
ciscoAtmIfPhysLineCode r/w
Enumeration
 .1.3.6.1.4.1.9.9.45.1.1.1.21
ciscoAtmIfPhysLineParityErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.45.1.1.1.3
ciscoAtmIfPhysPathParityErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.45.1.1.1.4
ciscoAtmIfPhysLcvErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.45.1.1.1.5
ciscoAtmIfPhysCBitParityErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.45.1.1.1.6
ciscoAtmIfPhysPBitParityErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.45.1.1.1.7
ciscoAtmIfPhysPlcpBipViolations
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.45.1.1.1.8
ciscoAtmIfPhysLineFebeErrors
SNMPv2-SMICounter32
 .1.3.6.1.4.1.9.9.45.1.1.1.9
ciscoAtmIfPhysMIBConformance
.1.3.6.1.4.1.9.9.45.3
ciscoAtmIfPhysMIBCompliances
.1.3.6.1.4.1.9.9.45.3.1
ciscoAtmIfPhysMIBGroups
.1.3.6.1.4.1.9.9.45.3.2
Dependencies (8) 4 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. RFC-1212rfc
  6. RFC1155-SMIrfc
  7. RFC1213-MIBrfc
  8. SNMPv2-CONFrfc
  9. CISCO-ATM-IF-PHYS-MIBciscoselected
Conformance Groups (9)
ciscoAtmIfPhysMIBCommonGroup
ciscoAtmIfPhysStatus
A collection of objects common to all ATM physical
layer interfaces.
 .1.3.6.1.4.1.9.9.45.3.2.1
ciscoAtmIfPhysMIBSonetGroup
ciscoAtmIfPhysSectionParityErrors ciscoAtmIfPhysLineParityErrors ciscoAtmIfPhysPathParityErrors
A collection of objects for ATM SONET interfaces.
 .1.3.6.1.4.1.9.9.45.3.2.2
ciscoAtmIfPhysMIBDs3E3Group
ciscoAtmIfPhysLcvErrors ciscoAtmIfPhysCBitParityErrors ciscoAtmIfPhysPBitParityErrors ciscoAtmIfPhysPlcpBipViolations
A collection of objects for ATM DS3/E3 interfaces.
 .1.3.6.1.4.1.9.9.45.3.2.3
ciscoAtmIfPhysMIBCommonGroup2
ciscoAtmIfPhysCellPayloadScrambling ciscoAtmIfPhysFramingMode ciscoAtmIfPhysLoopbackConfig ciscoAtmIfPhysTransmitClockSource ciscoAtmIfPhysClockSourcePriority ciscoAtmIfPhysClockSourceStatus
Additional collection of objects common to all ATM physical
layer interfaces.
 .1.3.6.1.4.1.9.9.45.3.2.4
ciscoAtmIfPhysMIBSonetGroup2
ciscoAtmIfPhysLineFebeErrors ciscoAtmIfPhysPathFebeErrors ciscoAtmIfPhysStsStreamScrambling
Additional collection of objects for ATM SONET interfaces.
 .1.3.6.1.4.1.9.9.45.3.2.5
ciscoAtmIfPhysMIBDs3Group
ciscoAtmIfPhysLineBuildOut
Collection of objects for ATM DS3 interfaces.
 .1.3.6.1.4.1.9.9.45.3.2.6
ciscoAtmIfPhysMIBDs1E1Group
ciscoAtmIfPhysLcvErrors ciscoAtmIfPhysPlcpBipViolations ciscoAtmIfPhysLineCode
A collection of objects for ATM DS1/E1 interfaces.
 .1.3.6.1.4.1.9.9.45.3.2.7
ciscoAtmIfPhysMIBDs1Group
ciscoAtmIfPhysDS1BitErrors
A collection of objects for ATM DS1 interfaces.
 .1.3.6.1.4.1.9.9.45.3.2.8
ciscoAtmIfPhysMIBE1Group
ciscoAtmIfPhysE1CrcErrors
A collection of objects for ATM E1 interfaces.
 .1.3.6.1.4.1.9.9.45.3.2.9
Compliance Statements (3)

OID .1.3.6.1.4.1.9.9.45.3.1.1
The compliance statement for entities which implement
the Cisco ATM Interface Physical MIB.
Required groups
mandatory ciscoAtmIfPhysMIBCommonGroup

OID .1.3.6.1.4.1.9.9.45.3.1.2
The compliance statement for entities which implement
the Cisco ATM Interface Physical MIB.
Required groups
mandatory ciscoAtmIfPhysMIBCommonGroup
mandatory ciscoAtmIfPhysMIBCommonGroup2
optional ciscoAtmIfPhysMIBSonetGroup This group is required for all SONET interfaces.
optional ciscoAtmIfPhysMIBSonetGroup2 This group is required for all SONET interfaces.
optional ciscoAtmIfPhysMIBDs3E3Group This group is required for all DS3/E3 interfaces.
optional ciscoAtmIfPhysMIBDs3Group This group is required for all DS3 interfaces.

OID .1.3.6.1.4.1.9.9.45.3.1.3
The compliance statement for entities which implement
the Cisco ATM Interface Physical MIB.
Required groups
mandatory ciscoAtmIfPhysMIBCommonGroup
mandatory ciscoAtmIfPhysMIBCommonGroup2
optional ciscoAtmIfPhysMIBSonetGroup This group is required for all SONET interfaces.
optional ciscoAtmIfPhysMIBSonetGroup2 This group is required for all SONET interfaces.
optional ciscoAtmIfPhysMIBDs3E3Group This group is required for all DS3/E3 interfaces.
optional ciscoAtmIfPhysMIBDs3Group This group is required for all DS3 interfaces.
optional ciscoAtmIfPhysMIBDs1E1Group This group is required for all DS1/E1 interfaces.
optional ciscoAtmIfPhysMIBDs1Group This group is required for all DS1 interfaces.
optional ciscoAtmIfPhysMIBE1Group This group is required for all E1 interfaces.