coiAlarmObjectType
CISCO-ALARM-MIB ·
.1.3.6.1.4.1.9.9.869.1.1.1.1.5
Object
column
CoiAlarmObjectTypeClass
indicates the type of the entity which raised this alarm. (refer coiAlarmObjectTypeClass)
Context
- MIB
- CISCO-ALARM-MIB
- OID
.1.3.6.1.4.1.9.9.869.1.1.1.1.5- Type
- column
- Access
- readonly
- Status
- current
- Parent
- coiAlarmActiveEntry
- Table
- coiAlarmActiveTable
- Siblings
- 10
Syntax
CoiAlarmObjectTypeClass
- Source
- CoiAlarmObjectTypeClass
- Base type
Enumeration
Values & Constraints
Type Values
1 | unknown |
2 | hwMemorySbe |
3 | hwMemoryMbe |
4 | hwMemoryParity |
5 | hwFreeze |
6 | hwFlopError |
7 | hwInternal |
8 | hwTimeout |
9 | hwHang |
10 | hwError |
11 | hwLinkCrc |
12 | hwCodeViolation |
13 | hwLinkDisparity |
14 | hwEnvmonSensorAlarm |
15 | hwEnvmonPemAlarm |
16 | hwEnvmonFanAlarm |
17 | swMemoryFault |
18 | swBusError |
19 | swProcessCrash |
20 | swMallocError |
21 | swFoobar |
22 | swConnectFail |
23 | swProcessRestart |
24 | swProcessFailure |
25 | swMandatoryProcessFailure |
26 | swServiceRestart |
27 | swServiceFailure |
28 | swPmHeartbeat |
29 | swHostosHeartbeat |
30 | swCccWdog |
31 | hwConfigErr |
32 | hwGenericErr |
33 | hwIndirectErr |
34 | hwOorThreshErr |
35 | hwUnexpectedErr |
36 | hwBoardReload |
37 | hwSliceReload |
38 | hwMiscErr |
39 | hwRxResourceErr |
40 | hwTxResourceErr |
41 | hwLinkStatChange |
42 | hwEtherBridge |
43 | swInitErr |
44 | swMiscErr |
45 | hwEnvmonEcuAlarm |
46 | hwEnvmonPwrFilterAlarm |
47 | hwSonet |
48 | hwG709 |
49 | hwEthernet |
50 | hwOptics |
51 | hwGfp |
52 | hwSdhController |
53 | swFsdbaggPlane |
54 | hwOts |
55 | swMacsecMka |
56 | swSmartLicErr |
57 | swProvisionErr |
58 | hwSyncec |
59 | hwPci |
60 | swWdDiskUsage |
61 | swCfgmgr |
62 | swG709Otnsec |
63 | hwCpri |
64 | hwImfpga |
65 | swFsdbaggConnMismatch |
66 | hwFibreChannel |
67 | hwE1 |
68 | hwCem |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| coiAlarmIndex AlarmIndex is hashIndex generated from combination of AID and
EID. AlarmIndex will be set only when AlarmObjectIfIndex and
AlarmObjectEntPhyIndex is not available, else default v… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.869.1.1.1.1.1 |
| coiAlarmServiceAffecting Alarm service affecting flag specifies if an alarm is Service
Affecting (SA) or Non-Service Affecting (NSA) | column | Enumeration | .1.3.6.1.4.1.9.9.869.1.1.1.1.10 |
| coiAlarmDescription Alarm Description used to inform operators about the alarm.
This contains enough information for an operator to be able
to understand the problem. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.869.1.1.1.1.11 |
| coiAlarmObjectIfIndex if the alarm is interface related, this is the index of the
interface in the interface table, else default 0 will be set. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.9.9.869.1.1.1.1.2 |
| coiAlarmObjectEntPhyIndex if the alarm is raised from Physical Entity like LC, this
field will be set to Physical Index of that Physical Entity,
else default 0 will be set. | column | CISCO-TCEntPhysicalIndexOrZero | .1.3.6.1.4.1.9.9.869.1.1.1.1.3 |
| coiAlarmObjectName User-visible name which uniquely identifies an object in
the system. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.869.1.1.1.1.4 |
| coiAlarmType Unique ID to identify an Alarm type in the system.
Also, referred to in different systems as condition type,
alarm identifier, or alarm mnemonic. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.869.1.1.1.1.6 |
| coiAlarmTimeStamp The time at which the alarm was raised by the system.
This value is expressed in seconds since
00:00:00 UTC, January 1, 1970 (see time(2)). | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.9.9.869.1.1.1.1.7 |
| coiAlarmSeverity The severity level indicating the criticality and impact
of the alarm. | column | Enumeration | .1.3.6.1.4.1.9.9.869.1.1.1.1.8 |
| coiAlarmStatus Alarm status represents if an alarm is currently raised or
cleared. | column | Enumeration | .1.3.6.1.4.1.9.9.869.1.1.1.1.9 |