CISCO-ALARM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
11

coiAlarmActiveTable

table
.1.3.6.1.4.1.9.9.869.1.1.1 · 1 row entry · 11 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk coiAlarmActiveTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ALARM-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ALARM-MIB::coiAlarmActiveTable' 
A table of Active Alarms entries.
coiAlarmActiveEntry row .1.3.6.1.4.1.9.9.869.1.1.1.1
An Entry containing active alarm attributes.Entries appear
in the alarm table when alarms are raised. They are removed
when the alarm is cleared.
Indexes
Column Syntax OID
coiAlarmIndex
AlarmIndex is hashIndex generated from combination of AID and
EID. AlarmIndex will be set only when AlarmObjectIfIndex and
AlarmObjectEntPhyIndex is not available, else default value
is set to 0
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.9.9.869.1.1.1.1.1
coiAlarmObjectIfIndex
if the alarm is interface related, this is the index of the
interface in the interface table, else default 0 will be set.
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.9.9.869.1.1.1.1.2
coiAlarmObjectEntPhyIndex
if the alarm is raised from Physical Entity like LC, this
field will be set to Physical Index of that Physical Entity,
else default 0 will be set.
CISCO-TCEntPhysicalIndexOrZero
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.869.1.1.1.1.3
coiAlarmObjectName
User-visible name which uniquely identifies an object in
the system.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.9.9.869.1.1.1.1.4
coiAlarmObjectType
indicates the type of the entity which raised this alarm.
(refer coiAlarmObjectTypeClass)
CoiAlarmObjectTypeClass
Type Values:
1unknown
2hwMemorySbe
3hwMemoryMbe
4hwMemoryParity
5hwFreeze
6hwFlopError
7hwInternal
8hwTimeout
9hwHang
10hwError
11hwLinkCrc
12hwCodeViolation
13hwLinkDisparity
14hwEnvmonSensorAlarm
15hwEnvmonPemAlarm
16hwEnvmonFanAlarm
17swMemoryFault
18swBusError
19swProcessCrash
20swMallocError
21swFoobar
22swConnectFail
23swProcessRestart
24swProcessFailure
25swMandatoryProcessFailure
26swServiceRestart
27swServiceFailure
28swPmHeartbeat
29swHostosHeartbeat
30swCccWdog
31hwConfigErr
32hwGenericErr
33hwIndirectErr
34hwOorThreshErr
35hwUnexpectedErr
36hwBoardReload
37hwSliceReload
38hwMiscErr
39hwRxResourceErr
40hwTxResourceErr
41hwLinkStatChange
42hwEtherBridge
43swInitErr
44swMiscErr
45hwEnvmonEcuAlarm
46hwEnvmonPwrFilterAlarm
47hwSonet
48hwG709
49hwEthernet
50hwOptics
51hwGfp
52hwSdhController
53swFsdbaggPlane
54hwOts
55swMacsecMka
56swSmartLicErr
57swProvisionErr
58hwSyncec
59hwPci
60swWdDiskUsage
61swCfgmgr
62swG709Otnsec
63hwCpri
64hwImfpga
65swFsdbaggConnMismatch
66hwFibreChannel
67hwE1
68hwCem
 .1.3.6.1.4.1.9.9.869.1.1.1.1.5
coiAlarmType
Unique ID to identify an Alarm type in the system.
Also, referred to in different systems as condition type,
alarm identifier, or alarm mnemonic.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.9.9.869.1.1.1.1.6
coiAlarmTimeStamp
The time at which the alarm was raised by the system.
This value is expressed in seconds since
00:00:00 UTC, January 1, 1970 (see time(2)).
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.9.9.869.1.1.1.1.7
coiAlarmSeverity
The severity level indicating the criticality and impact
of the alarm.
Enumeration
Enumerated Values:
0unknown
1notReported
2notAlarmed
3minor
4major
5critical
 .1.3.6.1.4.1.9.9.869.1.1.1.1.8
coiAlarmStatus
Alarm status represents if an alarm is currently raised or
cleared.
Enumeration
Enumerated Values:
0unknown
1set
2clear
3suppress
 .1.3.6.1.4.1.9.9.869.1.1.1.1.9
coiAlarmServiceAffecting
Alarm service affecting flag specifies if an alarm is Service
Affecting (SA) or Non-Service Affecting (NSA)
Enumeration
Enumerated Values:
0unknown
1notServiceAffecting
2serviceAffecting
 .1.3.6.1.4.1.9.9.869.1.1.1.1.10
coiAlarmDescription
Alarm Description used to inform operators about the alarm.
This contains enough information for an operator to be able
to understand the problem.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.9.9.869.1.1.1.1.11