cienaCesOamErrFrameWindow
CIENA-CES-OAM-MIB ·
.1.3.6.1.4.1.1271.2.3.5.1.1.8.1.5
Object
column
tenths of a second Unsigned32
The amount of time (in 100ms increments) over which the
threshold is defined. The default value is 10 (1 second).
If cienaCesOamErrFrameThreshold frame errors occur within a window
of cienaCesOamErrFrameWindow seconds (measured in tenths of
seconds), an Event Notification OAMPDU should be generated with
an Errored Frame Event TLV indicating the threshold has been
crossed in this window.
Context
- MIB
- CIENA-CES-OAM-MIB
- OID
.1.3.6.1.4.1.1271.2.3.5.1.1.8.1.5- Type
- column
- Access
- readonly
- Status
- current
- Units
- tenths of a second
- Parent
- cienaCesOamEventConfigEntry
- Table
- cienaCesOamEventConfigTable
- Siblings
- 11
Syntax
tenths of a second Unsigned32
Values & Constraints
Object Constraints
range: 10-600
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cienaCesOamEventPort An Ethernet port on the switch | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.1 |
| cienaCesOamErrFrameSecsEvNotifEnable Indicates whether the occurrence of an Errored Frame Seconds
Summary Event should result in an Event Notification OAMPDU
generated by the OAM layer.
… | column | Enumeration | .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.10 |
| cienaCesOamDyingGaspEnable Indicates whether the local device should attempt to indicate
a dying gasp fault via the OAMPDU flags field to its peer OAM
entity. If the system does not support dying gasp capa… | column | Enumeration | .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.11 |
| cienaCesOamCriticalEventEnable Indicates whether the local device should attempt to indicate
a critical event has occurred via the OAMPDU flags field to its peer OAM
entity. If the system does not support dyin… | column | Enumeration | .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.12 |
| cienaCesOamErrFramePeriodWindow The number of frames over which the threshold is defined.
The default value of the window is the number of minimum size
Ethernet frames that can be received over the physical lay… | column | frames SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.2 |
| cienaCesOamErrFramePeriodThreshold The number of frame errors that must occur for this event to
be triggered. The default value is one frame error.
If cienaCesOamErrFrame… | column | frames Unsigned32 | .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.3 |
| cienaCesOamErrFramePeriodEvNotifEnable Indicates whether the occurrence of an Errored Frame Period
Event should result in an Event Notification OAMPDU generated
by the OAM layer.
… | column | Enumeration | .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.4 |
| cienaCesOamErrFrameThreshold The number of frame errors that must occur for this event to
be triggered. The default value is one frame error.
If cienaCesOamErrFrameThr… | column | frames Unsigned32 | .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.6 |
| cienaCesOamErrFrameEvNotifEnable Indicates whether the occurrence of an Errored Frame Event
should result in an Event Notification OAMPDU generated by the
OAM layer.
By default, thi… | column | Enumeration | .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.7 |
| cienaCesOamErrFrameSecsSummaryWindow The amount of time (in 100ms intervals) over which the
threshold is defined. The default value is 100 (10 seconds).
If cienaCesOamErrFrameSecsSumma… | column | tenths of a second Integer32 | .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.8 |
| cienaCesOamErrFrameSecsSummaryThreshold The number of errored frame seconds that must occur for this
event to be triggered. The default value is one errored frame
second.
If cienaCesOamEr… | column | errored frame seconds Integer32 | .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.9 |