CIENA-CES-OAM-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
6
Rows
6
Columns
70
cienaCesOamStatsTable
table.1.3.6.1.4.1.1271.2.3.5.1.1.1
·
1 row entry
·
18 columns
Uses the ciena variant from
Command help
/opt/observium/mibs/ciena.
Walk cienaCesOamStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-OAM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-OAM-MIB::cienaCesOamStatsTable'
Statistics for the OAM function on a particular Ethernet-like interface.
An entry in the table, containing statistical information on
the Ethernet OAM function for a single Ethernet-like interface.
the Ethernet OAM function for a single Ethernet-like interface.
Indexes
| Column | Syntax | OID |
|---|---|---|
| cienaCesOamInformationTxA count of the number of Information OAMPDUs transmitted on this interface. An Information OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of th… | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.1.1.1 |
| cienaCesOamInformationRxA count of the number of Information OAMPDUs received on this interface. An Information OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for … | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.1.1.2 |
| cienaCesOamUniqueEventNotificationTxA count of the number of unique Event OAMPDUs transmitted on this interface. Event notifications may be sent in duplicate to increase the probability of successfully being received, given the possibility that a frame ma… | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.1.1.3 |
| cienaCesOamUniqueEventNotificationRxA count of the number of unique Event OAMPDUs received on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that a fram… | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.1.1.4 |
| cienaCesOamLoopbackControlTxA count of the number of Loopback Control OAMPDUs transmitted on this interface. An Loopback Control OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MA… | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.1.1.5 |
| cienaCesOamLoopbackControlRxA count of the number of Loopback Control OAMPDUs transmitted on this interface. An Loopback Control OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MA… | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.1.1.6 |
| cienaCesOamVariableRequestTxA count of the number of Variable Request OAMPDUs transmitted on this interface. An Variable Request OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved M… | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.1.1.7 |
| cienaCesOamVariableRequestRxA count of the number of Variable Request OAMPDUs received on this interface. An Variable Request OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slo… | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.1.1.8 |
| cienaCesOamVariableResponseTxA count of the number of Variable Response OAMPDUs transmitted on this interface. An Variable Response OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved… | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.1.1.9 |
| cienaCesOamVariableResponseRxA count of the number of Variable Response OAMPDUs received on this interface. An Variable Response OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MA… | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.1.1.10 |
| cienaCesOamOrgSpecificTxA count of the number of Organization Specific OAMPDUs transmitted on this interface. An Organization Specific OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the … | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.1.1.11 |
| cienaCesOamOrgSpecificRxA count of the number of Organization Specific OAMPDUs received on this interface. An Organization Specific OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the res… | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.1.1.12 |
| cienaCesOamUnsupportedCodesTxA count of the number of OAMPDUs transmitted on this interface with an unsupported op-code. An unsupported op-code OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of … | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.1.1.13 |
| cienaCesOamUnsupportedCodesRxA count of the number of OAMPDUs received on this interface with an unsupported op-code. An unsupported op-code OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the… | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.1.1.14 |
| cienaCesOamframesLostDueToOamA count of the number of frames that were dropped by the OAM multiplexer. Since the OAM multiplexer has multiple inputs and a single output, there may be cases where frames are dropped due to transmit resource contentio… | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.1.1.15 |
| cienaCesOamStatsPortAn Ethernet port on the switch. | Integer32 Constraints: range: 1-1000 | .1.3.6.1.4.1.1271.2.3.5.1.1.1.1.16 |
| cienaCesOamDuplicateEventNotificationTxA count of the number of duplicate Event OAMPDUs transmitted on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that … | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.1.1.17 |
| cienaCesOamDuplicateEventNotificationRxA count of the number of duplicate Event OAMPDUs received on this interface. Event notification OAMPDUs may be sent in duplicate to increase the probability of successfully being received, given the possibility that a f… | framesSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.1.1.18 |
cienaCesOamEventLogTable
table.1.3.6.1.4.1.1271.2.3.5.1.1.2
·
1 row entry
·
18 columns
Uses the ciena variant from
Command help
/opt/observium/mibs/ciena.
Walk cienaCesOamEventLogTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-OAM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-OAM-MIB::cienaCesOamEventLogTable'
This table records a history of the events that have occurred at the Ethernet OAM level. These events can include locally detected events, which may result in locally generated OAMPDUs, and remotely detected events, which are detected by the OAM peer entity and signaled to the local entity via Ethernet OAM. Ethernet OAM events can be signaled by Event Notification OAMPDUs or by the flags field in any OAMPDU.
An entry in the cienaCesOamEventLogTable.
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| cienaCesOamEventLogPortAn Ethernet port on the switch. | Integer32 Constraints: range: 1-1000 | .1.3.6.1.4.1.1271.2.3.5.1.1.2.1.1 | ||||||||||||||
| cienaCesOamEventLogIndexAn arbitrary integer for identifying individual events within the event log. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.2.1.2 | ||||||||||||||
| cienaCesOamEventLogTimestampThe value of sysUpTime at the time of the logged event. For locally generated events, the time of the event can be accurately retrieved from sysUpTime. For remotely generated events, the time of the event is indicated b… | SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t… | .1.3.6.1.4.1.1271.2.3.5.1.1.2.1.3 | ||||||||||||||
| cienaCesOamEventLogOuiThe OUI of the entity defining the object type. All IEEE 802.3 defined events (as appearing in [802.3ah] except for the Organizationally Unique Event TLVs) use the IEEE 802.3 OUI of 0x0180C2. Organizations defining thei… | OctetString Constraints: range: 3-3 | .1.3.6.1.4.1.1271.2.3.5.1.1.2.1.4 | ||||||||||||||
| cienaCesOamEventLogTypeThe type of event that generated this entry in the event log. When the OUI is the IEEE 802.3 OUI of 0x0180C2, the following event types are defined: erroredSymbolEvent(1), erroredFramePeriodEve… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.2.3.5.1.1.2.1.5 | ||||||||||||||
| cienaCesOamEventLogLocationWhether this event occurred locally, or was received from the OAM peer via Ethernet OAM. | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.2.3.5.1.1.2.1.6 | ||||||||||||||
| cienaCesOamEventLogWindowHiIf the event represents a threshold crossing event, the two objects cienaCesOamEventWindowHi and cienaCesOamEventWindowLo form an unsigned 64-bit integer yielding the window over which the value was measured for the thr… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.2.1.7 | ||||||||||||||
| cienaCesOamEventLogWindowLoIf the event represents a threshold crossing event, the two objects cienaCesOamEventWindowHi and cienaCesOamEventWindowLo form an unsigned 64-bit integer yielding the window over which the value was measured for the thr… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.2.1.8 | ||||||||||||||
| cienaCesOamEventLogThresholdHiIf the event represents a threshold crossing event, the two objects cienaCesOamEventThresholdHi and cienaCesOamEventThresholdLo form an unsigned 64-bit integer yielding the value that was crossed for the threshold cros… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.2.1.9 | ||||||||||||||
| cienaCesOamEventLogThresholdLoIf the event represents a threshold crossing event, the two objects cienaCesOamEventThresholdHi and cienaCesOamEventThresholdLo form an unsigned 64-bit integer yielding the value that was crossed for the threshold cros… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.2.1.10 | ||||||||||||||
| cienaCesOamEventLogValueIf the event represents a threshold crossing event, this value indicates the value of the parameter within the given window that generated this event (e.g., 11, when 11 occurrences happened in 5 seconds while the thresh… | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.1271.2.3.5.1.1.2.1.11 | ||||||||||||||
| cienaCesOamEventLogRunningTotalThis value represents the total number of times this occurrence has happened since the last reset (e.g., 3253, when 3253 symbol errors have occurred since the last reset, which has resulted in 51 symbol error threshold … | SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615 | .1.3.6.1.4.1.1271.2.3.5.1.1.2.1.12 | ||||||||||||||
| cienaCesOamEventLogEventTotalThis value represents the total number of times one or more of these occurrences have resulted in an event (e.g., 51 when 3253 symbol errors have occurred since the last reset, which has resulted in 51 symbol error thre… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.2.1.13 | ||||||||||||||
| cienaCesOamEventNotifChassisIndexThis object indicates the chassis index for the port used for trap definition. | Unsigned32 Constraints: range: 1-1 | .1.3.6.1.4.1.1271.2.3.5.1.1.2.1.14 | ||||||||||||||
| cienaCesOamEventNotifShelfIndexThis object indicates the shelf index for the port used for trap definition. | Unsigned32 Constraints: range: 1-1 | .1.3.6.1.4.1.1271.2.3.5.1.1.2.1.15 | ||||||||||||||
| cienaCesOamEventNotifSlotIndexThis object indicates the slot index for the port used for trap definition. | Unsigned32 Constraints: range: 1-7 | .1.3.6.1.4.1.1271.2.3.5.1.1.2.1.16 | ||||||||||||||
| cienaCesOamEventNotifPortNumberThis object indicates the port number for the corresponding PGID used for trap definition. | Unsigned32 Constraints: range: 1-65535 | .1.3.6.1.4.1.1271.2.3.5.1.1.2.1.17 | ||||||||||||||
| cienaCesOamEventNotifChannelNumberThis object indicates the channel number for the corresponding PGID used for trap definition. The value 0 is used if port of concern is not channelized. | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.2.1.18 |
cienaCesOamTable
table.1.3.6.1.4.1.1271.2.3.5.1.1.4
·
1 row entry
·
9 columns
Uses the ciena variant from
Command help
/opt/observium/mibs/ciena.
Walk cienaCesOamTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-OAM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-OAM-MIB::cienaCesOamTable'
Primary controls and status for the OAM capabilities of an Ethernet like interface. There is one row in this table for each Ethernet like interface in the system that supports the Ethernet OAM functions defined in [802.3ah].
An entry in the table. Contains an Ethernet like interface
in the system that supports the Ethernet OAM functions
defined in [802.3ah].
in the system that supports the Ethernet OAM functions
defined in [802.3ah].
Indexes
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| cienaCesOamPortAn Ethernet port on the switch. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.1271.2.3.5.1.1.4.1.1 | ||||||||||||||||||
| cienaCesOamAdminStateThis object is used to provision the default administrative OAM mode for this interface. This object represents the desired state of OAM for this interface. The cienaCesOamAdminState always starts i… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.2.3.5.1.1.4.1.2 | ||||||||||||||||||
| cienaCesOamOperStatusAt initialization and failure conditions, two OAM entities on the same full-duplex Ethernet link begin a discovery phase to determine what OAM capabilities may be used on that link. The progress of this initialization … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.2.3.5.1.1.4.1.3 | ||||||||||||||||||
| cienaCesOamModeThis object indicates the mode of OAM operation for this Ethernet like interface. OAM on Ethernet interfaces may be in 'active' mode or 'passive' mode. These two modes differ in that active mode provides additional ca… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.2.3.5.1.1.4.1.4 | ||||||||||||||||||
| cienaCesMaxOamPduSizeThe largest OAMPDU that the OAM entity supports. OAM entities exchange maximum OAMPDU sizes and negotiate to use the smaller of the two maximum OAMPDU sizes between the peers. This value is determined by the local impl… | bytesSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.1271.2.3.5.1.1.4.1.5 | ||||||||||||||||||
| cienaCesOamConfigRevisionThe configuration revision of the OAM entity as reflected in the latest OAMPDU sent by the OAM entity. The configuration revision is used by OAM entities to indicate configuration changes have occurred which might requ… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.4.1.6 | ||||||||||||||||||
| cienaCesOamFunctionsSupportedThe OAM functions supported on this Ethernet like interface. OAM consists of separate functional sets beyond the basic discovery process which is always required. These functional groups can be supported independently … | Bits Enumerated Values:
| .1.3.6.1.4.1.1271.2.3.5.1.1.4.1.7 | ||||||||||||||||||
| cienaCesOamPduTimerThe time in milliseconds between Information OAMPDUs being transmitted via the Ethernet port. | millisecondsInteger32 Constraints: range: 100-1000 | .1.3.6.1.4.1.1271.2.3.5.1.1.4.1.8 | ||||||||||||||||||
| cienaCesOamLinkLostTimerThe time in milliseconds to wait for an Information OAMPDU via the Ethernet port, from a peer, before declaring the link lost. | millisecondsInteger32 Constraints: range: 500-5000 | .1.3.6.1.4.1.1271.2.3.5.1.1.4.1.9 |
cienaCesOamPeerTable
table.1.3.6.1.4.1.1271.2.3.5.1.1.5
·
1 row entry
·
9 columns
Uses the ciena variant from
Command help
/opt/observium/mibs/ciena.
Walk cienaCesOamPeerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-OAM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-OAM-MIB::cienaCesOamPeerTable'
Information about the OAM peer for a particular Ethernet like
interface. OAM entities communicate with a single OAM peer
entity on full-duplex Ethernet links on which OAM is enabled
and operating properly.
In certain states, the OAM peer information is not available.
Whether peer information is available is communicated via the
cienaCesOamPeerStatus object. When this object is inactive, all
other information in the row is considered invalid.
An entry in the table, containing information on the peer OAM
entity for a single Ethernet like interface.
Note that there is at most one OAM peer for each Ethernet like
interface. There is exactly one r…
entity for a single Ethernet like interface.
Note that there is at most one OAM peer for each Ethernet like
interface. There is exactly one r…
Indexes
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| cienaCesOamLocalPortAn Ethernet port on the local switch. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.1271.2.3.5.1.1.5.1.1 | ||||||||
| cienaCesOamPeerStatusThis object indicates whether the information in this row should be considered valid. When active(1), the information is valid and represents the current peer of the OAM entity. When inactive(2), the information in thi… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.2.3.5.1.1.5.1.2 | ||||||||
| cienaCesOamPeerMacAddressThe MAC address of the peer OAM entity. The MAC address is derived from the most recently received OAMPDU. This value is initialized to all zeros (0x000000000000). This value is invalid if the cienaCesOamPeerStatus i… | OctetString Constraints: range: 6-6 | .1.3.6.1.4.1.1271.2.3.5.1.1.5.1.3 | ||||||||
| cienaCesOamPeerVendorOuiThe OUI of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The OUI can be used to identify the vendor of the remote OAM entity. This value is initialized to all zeros … | OctetString Constraints: range: 3-3 | .1.3.6.1.4.1.1271.2.3.5.1.1.5.1.4 | ||||||||
| cienaCesOamPeerVendorInfoThe Vendor Info of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The vendor information field is within the Local Information TLV, and can be used to determine additi… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.5.1.5 | ||||||||
| cienaCesOamPeerModeThe mode of the OAM peer as reflected in the latest Information OAMPDU received with a Local Information TLV. The mode of the peer can be determined from the Configuration field in the Local Information TLV of the last… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.2.3.5.1.1.5.1.6 | ||||||||
| cienaCesOamPeerMaxOamPduSizeThe maximum size of OAMPDU supported by the peer as reflected in the latest Information OAMPDU received with a Local Information TLV. Ethernet OAM on this interface must not use OAMPDUs that exceed this size. The max… | bytesSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.1271.2.3.5.1.1.5.1.7 | ||||||||
| cienaCesOamPeerConfigRevisionThe configuration revision of the OAM peer as reflected in the latest OAMPDU. This attribute is changed by the peer whenever it has a local configuration change for Ethernet OAM this interface. This value is initializ… | SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.5.1.8 | ||||||||
| cienaCesOamPeerFunctionsSupportedThe OAM functions supported on this Ethernet like interface. OAM consists of separate functionality sets above the basic discovery process. This value indicates the capabilities of the peer OAM entity with respect to t… | Bits Enumerated Values:
| .1.3.6.1.4.1.1271.2.3.5.1.1.5.1.9 |
cienaCesOamLoopbackTable
table.1.3.6.1.4.1.1271.2.3.5.1.1.6
·
1 row entry
·
4 columns
Uses the ciena variant from
Command help
/opt/observium/mibs/ciena.
Walk cienaCesOamLoopbackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-OAM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-OAM-MIB::cienaCesOamLoopbackTable'
This table contains methods to control the loopback state of
the local link as well as indicating the status of the
loopback function.
Loopback can be used to place the remote OAM entity in a state
where every received frame (except OAMPDUs) are echoed back
over the same interface on which they were received. In this
state, at the remote entity, 'normal' traffic is disabled as
only the looped back frames are transmitted on the interface.
Loopback is thus an intrusive operation that prohibits normal
data flow and should be used accordingly.
An entry in the table, containing information on the loopback
status for a single Ethernet like interface. There is an
entry in this table for every Ethernet like interface which
supports OAM and loopback function with…
status for a single Ethernet like interface. There is an
entry in this table for every Ethernet like interface which
supports OAM and loopback function with…
Indexes
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| cienaCesOamLoopbackPortAn Ethernet port on the switch. | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.1271.2.3.5.1.1.6.1.1 | ||||||||||||
| cienaCesOamLoopbackCommandThis attribute initiates or terminates remote loopback with an OAM peer. Value startRemoteLoopback(2) of this attribute indicates the local OAM client to send a loopback OAMPDU to the OAM peer with the loopback enable … | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.2.3.5.1.1.6.1.2 | ||||||||||||
| cienaCesOamLoopbackStatusThe loopback status of the OAM entity. This status is determined by a combination of the local parser and multiplexer states, the remote parser and multiplexer states, as well as by the actions of the local OAM client.… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.2.3.5.1.1.6.1.3 | ||||||||||||
| cienaCesOamLoopbackIgnoreRxSince OAM loopback is a disruptive operation (user traffic does not pass), this attribute provides a mechanism to provide controls over whether received OAM loopback commands are processed or ignored. When the value is… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.2.3.5.1.1.6.1.4 |
.1.3.6.1.4.1.1271.2.3.5.1.1.8
·
1 row entry
·
12 columns
Uses the ciena variant from
Command help
/opt/observium/mibs/ciena.
Walk cienaCesOamEventConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-OAM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-OAM-MIB::cienaCesOamEventConfigTable'
Ethernet OAM includes the ability to generate and receive
event notifications to indicate various link problems. This
table contains the mechanisms to configure the thresholds to
generate the standard Ethernet OAM Event.
These events are:
- Errored Symbol Period Event. Generated when the number of
symbol errors exceeds a threshold within a given window
defined by a number of symbols (e.g. 1,000 symbols out of
1,000,000 had errors).
- Errored Frame Period Event. Generated when the number of
frame errors exceeds a threshold within a given window
defined by a number of frames (e.g. 10 frames out of 1000
had errors).
- Errored Frame Event. Generated when the number of frame
errors exceeds a threshold within a given window defined
by a period of time (e.g. 10 frames in 1 second had
errors).
- Errored Frame Seconds Summary Event. Generated when the
number of errored frame seconds exceeds a threshold within
a given time period (e.g. 10 errored frame seconds within
the last 100 seconds). An errored frame second is defined
as a 1 second interval that had >0 frame errors.
Event configuration information is available for every
Ethernet like interface that supports OAM and the event
function of OAM as indicated in the cienaCesOamFunctionsSupported
attribute.
Event…
Ethernet like interface that supports OAM and the event
function of OAM as indicated in the cienaCesOamFunctionsSupported
attribute.
Event…
Indexes
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
| cienaCesOamEventPortAn Ethernet port on the switch | SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647 | .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.1 | ||||
| cienaCesOamErrFramePeriodWindowThe number of frames over which the threshold is defined. The default value of the window is the number of minimum size Ethernet frames that can be received over the physical layer in one second. … | framesSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295 | .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.2 | ||||
| cienaCesOamErrFramePeriodThresholdThe number of frame errors that must occur for this event to be triggered. The default value is one frame error. If cienaCesOamErrFramePeriodThreshold frame errors occur withi… | framesUnsigned32 Constraints: range: 0-4294967293 | .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.3 | ||||
| cienaCesOamErrFramePeriodEvNotifEnableIndicates whether the occurrence of an Errored Frame Period Event should result in an Event Notification OAMPDU generated by the OAM layer. By default, this object should have th… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.4 | ||||
| cienaCesOamErrFrameWindowThe amount of time (in 100ms increments) over which the threshold is defined. The default value is 10 (1 second). If cienaCesOamErrFrameThreshold frame errors occur within a window… | tenths of a secondUnsigned32 Constraints: range: 10-600 | .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.5 | ||||
| cienaCesOamErrFrameThresholdThe number of frame errors that must occur for this event to be triggered. The default value is one frame error. If cienaCesOamErrFrameThreshold frame errors occur within a windo… | framesUnsigned32 Constraints: range: 0-4294967293 | .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.6 | ||||
| cienaCesOamErrFrameEvNotifEnableIndicates whether the occurrence of an Errored Frame Event should result in an Event Notification OAMPDU generated by the OAM layer. By default, this object should have the value enabled(1… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.7 | ||||
| cienaCesOamErrFrameSecsSummaryWindowThe amount of time (in 100ms intervals) over which the threshold is defined. The default value is 100 (10 seconds). If cienaCesOamErrFrameSecsSummaryThreshold frame errors occur within a … | tenths of a secondInteger32 Constraints: range: 100-9000 | .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.8 | ||||
| cienaCesOamErrFrameSecsSummaryThresholdThe number of errored frame seconds that must occur for this event to be triggered. The default value is one errored frame second. If cienaCesOamErrFrameSecsSummaryThreshold frame errors … | errored frame secondsInteger32 Constraints: range: 0-65535 | .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.9 | ||||
| cienaCesOamErrFrameSecsEvNotifEnableIndicates whether the occurrence of an Errored Frame Seconds Summary Event should result in an Event Notification OAMPDU generated by the OAM layer. By default, this object should have the… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.10 | ||||
| cienaCesOamDyingGaspEnableIndicates whether the local device should attempt to indicate a dying gasp fault via the OAMPDU flags field to its peer OAM entity. If the system does not support dying gasp capability, reading the object should always… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.11 | ||||
| cienaCesOamCriticalEventEnableIndicates whether the local device should attempt to indicate a critical event has occurred via the OAMPDU flags field to its peer OAM entity. If the system does not support dying gasp capability, reading the object sh… | Enumeration Enumerated Values:
| .1.3.6.1.4.1.1271.2.3.5.1.1.8.1.12 |