gnGenStatDeviceIDUStatus

IDU status reported with this parameter. Bit1 is MSB.
The bit is set when a fault occurs. The bit is
 cleared when the fault clears.
              
bit 1  = Power status
bit 2  = Cable open status
bit 3  = Cable short status
bit 4  = Modem Lock status
bit 5  = Temperature status
bit 6  = No signal from ODU (Phos only)
bit 7  = loopback status
bit 8  = External alarm 1 status
bit 9  = External alarm 2 status
bit 10 = External alarm 3 status
bit 11 = External alarm 4 status
bit 12 = External alarm 5 status
bit 13 = External alarm 6 status
bit 14 = External alarm 7 status
bit 15 = External alarm 8 status
bit 16 = Remote connectivity status.
bit 17 = Inner communication status.
bit 18 = Link ID mismatch status.
bit 19 = Configuration mismatch status.
bit 20 = Shelf Id mismatch status (Phos only).
bit 21 = General HW failure.
bit 22 = No power to MUX board.
bit 23 = No power to MODEM board.
bit 24 = IDC disk firmware cinfiguration mismatch.
bit 25 = Modem configuration file.
bit 26 = Wayside channel E1/T1 LOS
bit 27 = loopback on Wayside channel

MIB

CERAGON-MIB

OID

.1.3.6.1.4.1.2281.2.1.9.1.11

Type

column

Access

readonly

Status

mandatory

Parent

gnGenStatDeviceEntry