installStatus
CAMBIUM-PTP500-MIB ·
.1.3.6.1.4.1.17713.5.9.3
Object
scalar
Enumeration
A non-zero value indicates that signalling was received with the wrong MAC address or a mismatched link name. NB: It is very unusual to detect this, because units with mis-configured Target MAC Address will normally fail to establish a wireless link. However, rare circumstances may establish a partial wireless link and detect this situation. NB: A non-zero value on start-up, or a change of value during operation, may generate an SNMP trap and/or SMTP email alert
Context
- MIB
- CAMBIUM-PTP500-MIB
- OID
.1.3.6.1.4.1.17713.5.9.3- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- management
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tFTPSoftwareUpgradeStatusText Descriptive text describing the status of the TFTP
Software upgrade process, including any error details | scalar | OctetString | .1.3.6.1.4.1.17713.5.9.10 |
| tFTPSoftwareUpgradeStatusAdditionalText Any additional text describing the status of the TFTP
Software upgrade process, including any error details | scalar | OctetString | .1.3.6.1.4.1.17713.5.9.11 |
| hTTPAccessEnabled This controls whether or not HTTP access is enabled,
i.e. if this is disabled (0) then the unit will not
respond to any requests on the HTTP port. Remote
management via HTTPS i… | scalar | Enumeration | .1.3.6.1.4.1.17713.5.9.12 |
| telnetAccessEnabled This controls whether or not Telnet access is enabled,
i.e. if this is disabled (0) then the unit will not
respond to any requests on the TELNET port. Any change in
this settin… | scalar | Enumeration | .1.3.6.1.4.1.17713.5.9.13 |
| hTTPPortNumber This controls the port number for HTTP access. A value
of zero will use the default port number. Any change in
this setting will not take effect until the unit has been
reboote… | scalar | Integer32 | .1.3.6.1.4.1.17713.5.9.14 |
| hTTPSPortNumber This controls the port number for HTTPS access. A value
of zero will use the default port number. Availability of
HTTPS is controlled via the Licence Key. Any change in
this se… | scalar | Integer32 | .1.3.6.1.4.1.17713.5.9.15 |
| telnetPortNumber This controls the port number for TELNET access. A value
of zero will use the default port number. Any change in
this setting will not take effect until the unit has been
reboo… | scalar | Integer32 | .1.3.6.1.4.1.17713.5.9.16 |
| hTTPSAccessEnabled This controls whether or not HTTPS access is enabled,
i.e. if this is disabled (0) then the unit will not
respond to any requests on the HTTPS port. Remote
management via HTTP … | scalar | Enumeration | .1.3.6.1.4.1.17713.5.9.17 |
| installArmState Indicates if the unit is being installed. NB: a value
other than 'disarmed' on startup, or a change of state
during operation may generate an SNMP trap and/or SMTP
email alert | scalar | Enumeration | .1.3.6.1.4.1.17713.5.9.4 |
| tFTPServerIPAddress IP address of the TFTP Server from which the TFTP
Software Upgrade File Name will be retrieved | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.17713.5.9.5 |
| tFTPServerPortNumber The port number of the TFTP Server from which the TFTP
Software Upgrade File Name will be retrieved | scalar | Integer32 | .1.3.6.1.4.1.17713.5.9.6 |
| tFTPSoftwareUpgradeFileName Filename of the Software Upgrade to be loaded from the
TFTP Server | scalar | OctetString | .1.3.6.1.4.1.17713.5.9.7 |
| tFTPStartSoftwareUpgrade Write '1' to this attribute to start the TFTP software
upgrade process. The attribute will be reset to 0 when
the upgrade process has finished | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.17713.5.9.8 |
| tFTPSoftwareUpgradeStatus The current status of the TFTP Software upgrade process | scalar | Enumeration | .1.3.6.1.4.1.17713.5.9.9 |