CAMBIUM-PTP500-MIB Table View

A table storing a snapshot of various DFS measurements for each channel

dfsTableEntry row .1.3.6.1.4.1.17713.5.3.2.1

Table DfsTable

Indexes

No indexes recorded

Column	Syntax	OID
dfsTableIndex used to index values in the dfsTable.	Integer32	.1.3.6.1.4.1.17713.5.3.2.1.1
dfsMeans Snapshot of DFS means	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.17713.5.3.2.1.2
dfsNineNinePointNinePercentiles Snapshot of DFS 99.9 percentiles	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.17713.5.3.2.1.3
dfsPeaks Snapshot of DFS peaks	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.17713.5.3.2.1.4

A priority queue mapping table. This is a list of packet queues indexed by VLAN priority.

vLANPriorityTableEntry row .1.3.6.1.4.1.17713.5.6.15.1

Table VLANPriorityTable

Indexes

No indexes recorded

Column	Syntax	OID
vLANPriorityQueueMapping Mapping of VLAN priority flag to packet queue. The higher the queue number the greater its priority.	Enumerationr/w	.1.3.6.1.4.1.17713.5.6.15.1.1
vLANPriorityTableIndex VLAN priority flag, used to index values in the vLANPriorityTable.	Enumeration	.1.3.6.1.4.1.17713.5.6.15.1.2

SNMP trap configuration table.

sNMPTrapTableEntry row .1.3.6.1.4.1.17713.5.16.4.1

Table SNMPTrapTable

Indexes

No indexes recorded

Column	Syntax	OID
sNMPTrapTableIndex SNMP trap value, used to index the SNMPTrapTable.	Integer32	.1.3.6.1.4.1.17713.5.16.4.1.1
sNMPTrapIPAddress The IP address to which all SNMP Traps are sent. An IP Address of 0.0.0.0 disables all TRAP generation. NB: A system reboot is required to activate changes to this attribute.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.17713.5.16.4.1.2
sNMPTrapPortNumber Destination port for SNMP Traps (default=162). A value of 0 will disable the trap receiver. NB: A system reboot is required to activate changes to this attribute.	Integer32r/w	.1.3.6.1.4.1.17713.5.16.4.1.3

The User Table Control group contains objects specifically for user account management.

userTableEntry row .1.3.6.1.4.1.17713.5.25.2.1

Table UserTable

Indexes

No indexes recorded

Column	Syntax	OID
userTableIndex used to index values in the userTable.	Integer32	.1.3.6.1.4.1.17713.5.25.2.1.1
userName User name which must be entered, along with the appropriate password, in order to gain access to the system.	OctetString	.1.3.6.1.4.1.17713.5.25.2.1.2
userRole Role of the selected user. A Security Officer has access to and can modify all settings. A System Administrator has access to and can modify all non-security settings. A Read Only user can view settings, but cannot m…	Enumeration	.1.3.6.1.4.1.17713.5.25.2.1.3
userEnabled Enable / Disable the selected user	Enumeration	.1.3.6.1.4.1.17713.5.25.2.1.4
userPassword User password, which must be entered in order to gain access to the system.	OctetStringr/w	.1.3.6.1.4.1.17713.5.25.2.1.5