cadIpdrDataAckTimeout
CADANT-IPDR-MIB ·
.1.3.6.1.4.1.4998.1.1.100.30.1.5
Object
scalar
r/w
seconds Integer32
Maximum elapsed time before a DATA message must be acknowledged by the collector. Applicable to DOCSIS 2.0 mode.
Context
- MIB
- CADANT-IPDR-MIB
- OID
.1.3.6.1.4.1.4998.1.1.100.30.1.5- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- seconds
- Parent
- cadIpdrMIBObjects
- Siblings
- 15
Syntax
seconds Integer32
Values & Constraints
Object Constraints
range: 1-600
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cadIpdrExportEnabled IPDR streams is enabled or disabled. When enabled the
cadIpdrQueryPort and cadIpdrStreamingPort will be open to listen
for collector connections. When disabled, all ports will b… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.100.30.1.1 |
| cadIpdrExportMode DOCSIS mode exporter, either DOCSIS 2.0 or DOCSIS 3.0.
The default is DOCSIS 2.0 mode, or 1. | scalar | Integer32 | .1.3.6.1.4.1.4998.1.1.100.30.1.10 |
| cadIpdrCollectorTable A priority ordered list of collectors that will be allowed
to connect to the exporter. The highest priority active collector
is designated the primary collector. This list is ex… | table | - | .1.3.6.1.4.1.4998.1.1.100.30.1.11 |
| cadIpdrReportCycleTable A list of scheduled report cycle start times and interval
durations. Multiple entries indicate blocks of time with
variable interval durations. Applicable to DOCSIS 2.0 mode. | table | - | .1.3.6.1.4.1.4998.1.1.100.30.1.12 |
| cadIpdrServiceTable A session-id ordered list of services that will be allowed
to be requested by the Collector. This list is exclusive and are used
when the exporter is in DOCSIS 3.0 mode. | table | - | .1.3.6.1.4.1.4998.1.1.100.30.1.13 |
| cadIpdrReportCycleSetTable A list of sets of scheduled report cycle start times and interval
durations. Multiple entries indicate blocks of time with
variable interval durations. Applicable to DOCSIS 3.0 m… | table | - | .1.3.6.1.4.1.4998.1.1.100.30.1.14 |
| cadIpdrCountsTable A session-id/priority/collector ordered list of counts for all sessions.
Applicable to DOCSIS 2.0 and 3.0 modes. | table | - | .1.3.6.1.4.1.4998.1.1.100.30.1.15 |
| cadIpdrSessionCollectorTable A session and priority ordered list of collectors that is
used to track the Active and Primary status of the collector
relative to this session. Applicable to DOCSIS 3.0 mode. | table | - | .1.3.6.1.4.1.4998.1.1.100.30.1.16 |
| cadIpdrQueryPort UDP port used to listen for collector queries. | scalar | Integer32 | .1.3.6.1.4.1.4998.1.1.100.30.1.2 |
| cadIpdrStreamingPort TCP port used to listen for collector connections. | scalar | Integer32 | .1.3.6.1.4.1.4998.1.1.100.30.1.3 |
| cadIpdrDataAckWindow Maximum number of unacknowledged IPDR/SP messages that may
be outstanding to the collector. Applicable to DOCSIS 2.0 mode. | scalar | Integer32 | .1.3.6.1.4.1.4998.1.1.100.30.1.4 |
| cadIpdrKeepAliveInterval Maximum duration of protocol silence before a KEEPALIVE message
must be sent. | scalar | seconds Integer32 | .1.3.6.1.4.1.4998.1.1.100.30.1.6 |
| cadIpdrExportAllCounts Export all counts if true, and supress duplicate counts
if false. The default is false. Applicable to DOCSIS 2.0 mode. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.100.30.1.7 |
| cadIpdrExportCpeInfo Export information about CPEs behind CMs (CmCpeInfoList)
if set to true. If false, supress information about CPEs.
The default is false. Applicable to DOCSIS 2.0 mode. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4998.1.1.100.30.1.8 |
| cadIpdrSessionId session-id used in the header of IPDR protocol messages.
The default is 1. Applicable to DOCSIS 2.0 mode. | scalar | Integer32 | .1.3.6.1.4.1.4998.1.1.100.30.1.9 |