CADANT-IPDR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
54

cadIpdrCollectorTable

table
.1.3.6.1.4.1.4998.1.1.100.30.1.11 · 1 row entry · 10 columns
Open in standard view 
A priority ordered list of collectors that will be allowed
to connect to the exporter.  The highest priority active collector
is designated the primary collector.  This list is exclusive
and any collector not in this list will be ignored.  Applicable to
DOCSIS 2.0 mode.
cadIpdrCollectorEntry entry .1.3.6.1.4.1.4998.1.1.100.30.1.11.1
Indexes
cadIpdrCollectorPriority cadIpdrCollectorIpAddress
Column Syntax OID
cadIpdrCollectorPriority
The collector priority. Lower values indicate higher priority.
The default priority is 1. Applicable to DOCSIS 2.0 mode.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.1
cadIpdrCollectorIpAddrType
The type of internet address (IPv4 or IPv6).
The only internet address type currently allowed is IPv4.
Applicable to DOCSIS 2.0 mode.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.2
cadIpdrCollectorIpAddress
Source IP address of a collector that will be permitted to
connect to the exporter. Applicable to DOCSIS 2.0 mode.
CADANT-TCInetAddressIPv4or6
Textual Convention: CADANT-TCInetAddressIPv4or6 OctetString
Type Constraints:
range: 0
range: 4
range: 8
range: 16
range: 20
 .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.3
cadIpdrCollectorPort
Destination port of collector if exporter trys to connect
to the collector. Default is 4747. This object is currently disabled.
Applicable to DOCSIS 2.0 mode.
INET-ADDRESS-MIBInetPortNumber
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.4
cadIpdrCollectorActive
True if this collector is connected to the exporter.
Applicable to DOCSIS 2.0 mode.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.5
cadIpdrCollectorPrimary
True if this collector is the primary collector.
Applicable to DOCSIS 2.0 mode.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.6
cadIpdrCollectorOutIntRecs
Number of interim data records exported to this collector.
Applicable to DOCSIS 2.0 mode.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.7
cadIpdrCollectorOutStpRecs
Number of stop data records exported to this collector.
Applicable to DOCSIS 2.0 mode.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.8
cadIpdrCollectorSupIntRecs
Number of interim data records suppressed for this collector.
Applicable to DOCSIS 2.0 mode.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.9
cadIpdrCollectorStatus
Row control for this collector. The only valid values for
this object are createAndGo, destroy, and active.
Applicable to DOCSIS 2.0 mode.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4998.1.1.100.30.1.11.1.10

cadIpdrReportCycleTable

table
.1.3.6.1.4.1.4998.1.1.100.30.1.12 · 1 row entry · 7 columns
Open in standard view 
A list of scheduled report cycle start times and interval
durations.  Multiple entries indicate blocks of time with
variable interval durations. Applicable to DOCSIS 2.0 mode.
cadIpdrReportCycleEntry entry .1.3.6.1.4.1.4998.1.1.100.30.1.12.1
Indexes
cadIpdrReportStartHH cadIpdrReportStartMM
Column Syntax OID
cadIpdrReportStartHH
The report cycle start hour. The default is 00.
Applicable to DOCSIS 2.0 mode.
Integer32
Constraints:
range: 0-23
 .1.3.6.1.4.1.4998.1.1.100.30.1.12.1.1
cadIpdrReportStartMM
The report cycle start minutes after the hour. Default is 00.
Applicable to DOCSIS 2.0 mode.
Integer32
Constraints:
range: 0-59
 .1.3.6.1.4.1.4998.1.1.100.30.1.12.1.2
cadIpdrReportInterval
The report cycle interval duration in minutes. The default
is 60 minutes. Applicable to DOCSIS 2.0 mode.
minutesInteger32r/w
Constraints:
range: 15-1440
 .1.3.6.1.4.1.4998.1.1.100.30.1.12.1.3
cadIpdrReportOutIntRecs
Number of interim data records exported during this report cycle.
Applicable to DOCSIS 2.0 mode.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4998.1.1.100.30.1.12.1.4
cadIpdrReportOutStpRecs
Number of stop data records exported during this report cycle.
Applicable to DOCSIS 2.0 mode.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4998.1.1.100.30.1.12.1.5
cadIpdrReportSupIntRecs
Number of interim data records suppressed during this report cycle.
Applicable to DOCSIS 2.0 mode.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4998.1.1.100.30.1.12.1.6
cadIpdrReportStatus
Row control for this report cycle. The only valid values for
this object are createAndGo, destroy, and active.
Applicable to DOCSIS 2.0 mode.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4998.1.1.100.30.1.12.1.7

cadIpdrServiceTable

table
.1.3.6.1.4.1.4998.1.1.100.30.1.13 · 1 row entry · 10 columns
Open in standard view 
A session-id ordered list of services that will be allowed
to be requested by the Collector.  This list is exclusive and are used
when the exporter is in DOCSIS 3.0 mode.
cadIpdrServiceEntry entry .1.3.6.1.4.1.4998.1.1.100.30.1.13.1
Indexes
cadIpdrServiceSessionId
Column Syntax OID
cadIpdrServiceSessionId
The session-id used in the header of IPDR protocol messages.
The default is 1.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.1
cadIpdrServiceType
The session service types are unknown(0), samis_1(1),
samis_2(2), cpe(3), cm_reg(4), cm_us(5), spect(6),
diag(7), topo(8), us_util(9), ds_util(10), diag_evt(11),
diag_det(12), cm_sf(13), cpe_a2(14), mcast(15).
The defau…
Integer32r/w
Constraints:
range: 0-13
 .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.2
cadIpdrServiceMethod
The session service method
(unknown, time, event, adhoc).
The default is time.
Integer32r/w
Constraints:
range: 0-3
 .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.3
cadIpdrServicePriority
The session priority. Lower values indicate higher priority.
This object is not used.
Integer32r/w
Constraints:
range: 0-64
 .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.4
cadIpdrServiceDataAckWindow
The session maximum number of unacknowledged IPDR/SP messages that
may be outstanding to the collector.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.5
cadIpdrServiceDataAckTimeout
The session maximum elapsed time before a DATA message must be
acknowledged by the collector.
secondsInteger32r/w
Constraints:
range: 1-600
 .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.6
cadIpdrServiceReportCycleSet
The session report cycle set.
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.7
cadIpdrServiceEvtPaceGap
The session event pace gap.
Integer32r/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.8
cadIpdrServiceAllCounts
Export all counts if true, and supress duplicate counts
if false. The default is false.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.9
cadIpdrServiceStatus
Row control for this service. The only valid values for
this object are createAndGo, destroy, and active.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4998.1.1.100.30.1.13.1.10

cadIpdrReportCycleSetTable

table
.1.3.6.1.4.1.4998.1.1.100.30.1.14 · 1 row entry · 5 columns
Open in standard view 
A list of sets of scheduled report cycle start times and interval
durations.  Multiple entries indicate blocks of time with
variable interval durations. Applicable to DOCSIS 3.0 mode.
cadIpdrReportCycleSetEntry entry .1.3.6.1.4.1.4998.1.1.100.30.1.14.1
Indexes
cadIpdrReportCycleSetSet cadIpdrReportCycleSetStartHH cadIpdrReportCycleSetStartMM
Column Syntax OID
cadIpdrReportCycleSetSet
The report cycle set id number. The default is 1.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.4998.1.1.100.30.1.14.1.1
cadIpdrReportCycleSetStartHH
The report cycle set start hour. The default is 00.
Integer32
Constraints:
range: 0-23
 .1.3.6.1.4.1.4998.1.1.100.30.1.14.1.2
cadIpdrReportCycleSetStartMM
The report cycle set start minutes after the hour. Default is 00.
Integer32
Constraints:
range: 0-59
 .1.3.6.1.4.1.4998.1.1.100.30.1.14.1.3
cadIpdrReportCycleSetInterval
The report cycle set interval duration in minutes. The default
is 60 minutes.
minutesInteger32r/w
Constraints:
range: 15-1440
 .1.3.6.1.4.1.4998.1.1.100.30.1.14.1.4
cadIpdrReportCycleSetStatus
Row control for this report cycle set entry. The only valid values for
this object are createAndGo, destroy, and active.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4998.1.1.100.30.1.14.1.5

cadIpdrCountsTable

table
.1.3.6.1.4.1.4998.1.1.100.30.1.15 · 1 row entry · 14 columns
Open in standard view 
A session-id/priority/collector ordered list of counts for all sessions.
Applicable to DOCSIS 2.0 and 3.0 modes.
cadIpdrCountsEntry entry .1.3.6.1.4.1.4998.1.1.100.30.1.15.1
Indexes
cadIpdrCountsSessionId cadIpdrCountsCollectorPriority cadIpdrCountsCollectorIpAddress cadIpdrCountsStartHH cadIpdrCountsStartMM cadIpdrCountsAdhocIndex
Column Syntax OID
cadIpdrCountsSessionId
The counts session-id used in the header of IPDR protocol messages.
The default is 1.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.1
cadIpdrCountsCollectorPriority
The counts collector priority. Lower values indicate higher priority.
The default priority is 1.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.2
cadIpdrCountsCollectorIpAddress
The counts source IP address of a collector that will be permitted to
connect to the exporter.
CADANT-TCInetAddressIPv4or6
Textual Convention: CADANT-TCInetAddressIPv4or6 OctetString
Type Constraints:
range: 0
range: 4
range: 8
range: 16
range: 20
 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.3
cadIpdrCountsStartHH
The counts report cycle start hour. The default is 00.
Integer32
Constraints:
range: 0-23
 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.4
cadIpdrCountsStartMM
The counts report cycle start minutes after the hour. Default is 00.
Integer32
Constraints:
range: 0-59
 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.5
cadIpdrCountsAdhocIndex
The counts adhoc index.
Unsigned32
Constraints:
range: 0-4294967295
 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.6
cadIpdrCountsStartTime
The counts report cycle start time. Default is 0 length.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.7
cadIpdrCountsStopTime
The counts report cycle stop time. Default is 0 length.
OctetStringr/w
Constraints:
range: 0-16
 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.8
cadIpdrCountsIntRecs
Number of interim data records exported for this session-id to this collector.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.9
cadIpdrCountsSupIntRecs
Number of interim data records suppressed for this session-id to this collector.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.10
cadIpdrCountsStartRecs
Number of start data records exported for this session-id to this collector.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.11
cadIpdrCountsStopRecs
Number of stop data records exported for this session-id to this collector.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.12
cadIpdrCountsEventRecs
Number of event data records exported for this session-id to this collector.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.13
cadIpdrCountsStatus
Row control for this counts entry. The only valid values for
this object are createAndGo, destroy, and active.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4998.1.1.100.30.1.15.1.14

cadIpdrSessionCollectorTable

table
.1.3.6.1.4.1.4998.1.1.100.30.1.16 · 1 row entry · 8 columns
Open in standard view 
A session and priority ordered list of collectors that is
used to track the Active and Primary status of the collector
relative to this session. Applicable to DOCSIS 3.0 mode.
cadIpdrSessionCollectorEntry entry .1.3.6.1.4.1.4998.1.1.100.30.1.16.1
Indexes
cadIpdrSessionCollectorSessionId cadIpdrSessionCollectorPriority cadIpdrSessionCollectorIpAddress
Column Syntax OID
cadIpdrSessionCollectorSessionId
The counts session-id used in the header of IPDR protocol messages.
The default is 1.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.4998.1.1.100.30.1.16.1.1
cadIpdrSessionCollectorPriority
The collector priority. Lower values indicate higher priority.
The default priority is 1.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.4998.1.1.100.30.1.16.1.2
cadIpdrSessionCollectorIpAddrType
The type of internet address (IPv4 or IPv6).
The only internet address type currently allowed is IPv4.
INET-ADDRESS-MIBInetAddressType
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.4998.1.1.100.30.1.16.1.3
cadIpdrSessionCollectorIpAddress
Source IP address of a collector that will be permitted to
connect to the exporter.
CADANT-TCInetAddressIPv4or6
Textual Convention: CADANT-TCInetAddressIPv4or6 OctetString
Type Constraints:
range: 0
range: 4
range: 8
range: 16
range: 20
 .1.3.6.1.4.1.4998.1.1.100.30.1.16.1.4
cadIpdrSessionCollectorPort
Destination port of collector if exporter trys to connect
to the collector. Default is 4747. This object is currently disabled.
INET-ADDRESS-MIBInetPortNumber
Textual Convention: INET-ADDRESS-MIBInetPortNumber Unsigned32
Type Constraints:
range: 0..65535
 .1.3.6.1.4.1.4998.1.1.100.30.1.16.1.5
cadIpdrSessionCollectorActive
True if this collector is connected to the exporter for this session.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4998.1.1.100.30.1.16.1.6
cadIpdrSessionCollectorPrimary
True if this collector is the primary collector for this session.
SNMPv2-TCTruthValue
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.4998.1.1.100.30.1.16.1.7
cadIpdrSessionCollectorStatus
Row control for this collector. The only valid values for
this object are createAndGo, destroy, and active.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.4998.1.1.100.30.1.16.1.8