cerSpareModeFaultId – CADANT-CMTS-EQUIPMENT-MIB

Object

column Enumeration

The fault group associated with the override behavior.
When an event occurs that would normally trigger a card
reset and a sparing event and that event is in the configured
fault group, the mode configured in the cerCard table is 
overriden.
              
pingFault - Communications failure with active controller
initTimeout - Timeout during card initialization
ersmFault - Card ERSM failure
swException - Software exception failure
bcm3142Err - Upstream CAM PHY device fatal fault condition
dulFailure - Upstream CAM periodic packet loop detected uncorrectable fault
dataplaneFailrue - Fatal errors originating in dataplane processor
dsUnderPower - Downstream CAM detected power on a connector is below operational threshold
dsOverPower - Downstream CAM detected power on a connector is above operational threshold
sbecOverflow - Excessive number of single bit ECC errors
deviceFatal - General device fatal error.  For example in internal datapaths or pci controller.
fpgaFatalError - Fatal CRC errors detected in FPGA device
clockLost - Loss of clock or loss of clock lock
pwrSensorHighFault - Detected voltage is above operational threshold
pwrSensorLowFault - Detected voltage is below operational threshold
fpgaBufferPoolFault - Number of available buffers in MAC fpga is below threshold
dataplaneLinkFault - Card has lost dataplane connectivity
monitoredTaskFailure - Monitored software task has failed

Context

MIB: CADANT-CMTS-EQUIPMENT-MIB
OID: .1.3.6.1.4.1.4998.1.1.10.1.11.1.1.2
Type: column
Access: noaccess
Status: current
Parent: cerSpareModeExtEntry
Table: cerSpareModeExtTable
Siblings: 3

Syntax

Enumeration

Values & Constraints

Enumerated Values

`0`	none
`1`	pingFault
`2`	initTimeout
`3`	ersmFault
`4`	swException
`5`	bcm3142Err
`6`	dulFailure
`7`	dataplaneFailure
`8`	dsUnderPower
`9`	dsOverPower
`10`	sbecOverflow
`11`	deviceFatal
`12`	fpgaFatalError
`13`	clockLost
`14`	pwrSensorHighFault
`15`	pwrSensorLowFault
`16`	fpgaBufferPoolFault
`17`	dataplaneLinkFault
`18`	monitoredTaskFailure

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cerSpareModeCardId The cardId of the spare group leader for this override.	column	CADANT-TCCardId	`.1.3.6.1.4.1.4998.1.1.10.1.11.1.1.1`
cerSpareModeMode The sparing mode that should be enforced when an error in the configured catagory occurs that results in a sparing event.	column	Enumeration	`.1.3.6.1.4.1.4998.1.1.10.1.11.1.1.3`
cerSpareModeRowStatus The only set actions supported on this table are createAndGo(4) and destroy(6).	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.4998.1.1.10.1.11.1.1.4`