aniBsuWirelessPtPConfModify
BSUWIRELESSIF-MIB ·
.1.3.6.1.4.1.4325.3.2.10.10
Object
This flag is used to modify and commit the changes of the dependent
parameters from this group:
aniBsuWirelessPtPConfChannelWidth
aniBsuWirelessPtPConfTDDFrameSize
aniBsuWirelessPtPConfCellRadius
aniBsuWirelessPtPConfDSUSRatio
aniBsuWirelessPtPConfPolarization
aniBsuWirelessPtPConfTargetFrequency
aniBsuWirelessPtPConfBsuRadioRegPowerLimit
aniBsuWirelessPtPConfSuRadioRegPowerLimit
aniBsuWirelessFreqAdminTable
Setting this object to true(1) causes the agent to validate
the entire set of parameters. If these set of values are
acceptable, then the new values are changed on the device.
However, for the changes to take effect, it is required to upload
the configuration (set aniDevControlStartUpload in the device_control.mib
to true) and then reboot the device.
If the validation fails when aniBsuWirelessPtPConfModify is set
to true(1), the changes are not commited and an error is returned.
In that case, the modified parameters in this group may not
reflect the correct values. They will display the values last
configured by the user, rather than the current values on the device.
To view the current values for
aniBsuWirelessPtPConfChannelWidth refer to aniBsuChannelWidth
aniBsuWirelessPtPConfTDDFrameSize refer to aniBsuTDDFrameSize
aniBsuWirelessPtPConfCellRadius refer to aniBsuStatusCellRadius (bsu_status.mib)
aniBsuWirelessPtPConfTargetFrequency refer to aniBsuTargetFrequency
aniBsuWirelessPtPConfBsuRadioRegPowerLimit refer to aniBsuWssRadioRegPowerLimit
aniBsuWirelessPtPConfSuRadioRegPowerLimit refer to aniBsuSuRadioRegPowerLimit
aniBsuWirelessFreqAdminTable refer to aniBsuWirelessFreqOperTable
A Get request on this object will always return false(2).
Context
- MIB
- BSUWIRELESSIF-MIB
- OID
.1.3.6.1.4.1.4325.3.2.10.10- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- aniBsuWirelessPtPConfGroup
- Siblings
- 13
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aniBsuWirelessPtPConfFrequencyBand The Frequency Band to which the Channel Center Frequency
belongs.
Valid Range:
1 - 5.3 GHz UNII Band (5250 - 5350 MHz)
12 - 5.3 GHz General Band (5150 - 5350 MHz)
2 - … | scalar | Enumeration | .1.3.6.1.4.1.4325.3.2.10.1 |
| aniBsuWirelessPtPConfBsuId The unique AP/BSU identifier.
This is the AP ID required for generating seed for
frequency reuse support.
Note: When this object is changed through SNMP agent,
it is re… | scalar | OctetString | .1.3.6.1.4.1.4325.3.2.10.11 |
| aniBsuWirelessPtPConfVerifyAllSu This flag is used to verify if the current set of BSU
wireless parameters, that is,
aniBsuWirelessPtPConfChannelWidth,
aniBsuWirelessPtPConfTargetFrequency,
aniBsuWirelessPtPConf… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4325.3.2.10.12 |
| aniBsuWirelessPtPConfSwitchToFrequency The Frequency selected to be switched.
This frequency should be either one of the frequency entries in the
aniBsuWirelessFreqOperTable or the current target frequency
aniBsuTarge… | scalar | MHz SNMPv2-TCDisplayString | .1.3.6.1.4.1.4325.3.2.10.13 |
| aniBsuWirelessPtPConfSuAFSTimeout Configure AFS SU Timeout (second) | scalar | Integer32 | .1.3.6.1.4.1.4325.3.2.10.14 |
| aniBsuWirelessPtPConfChannelWidth The Channel Width.
width-2 refers to 2MHz, width-3 refers to 3MHz
width-4 refers to 4MHz, width-5 refers to 5MHz,width-6 refers to 6MHz
width-7 refers to 7MHz, width-1-75 refers t… | scalar | Enumeration | .1.3.6.1.4.1.4325.3.2.10.2 |
| aniBsuWirelessPtPConfTDDFrameSize The total size of the TDD Frame.
For PW620, only low-latency and normal-mode are allowed.
Also refer to the constraints listed under
aniBsuWirelessPtPConfChannelWidth … | scalar | Enumeration | .1.3.6.1.4.1.4325.3.2.10.3 |
| aniBsuWirelessPtPConfCellRadius The cell radius or link distance
Refer to the constraints listed under
aniBsuWirelessPtPConfChannelWidth description.
Note: When this object is changed thro… | scalar | Enumeration | .1.3.6.1.4.1.4325.3.2.10.4 |
| aniBsuWirelessPtPConfDSUSRatio The Downstream upstream ratio (DS/US ratio).
This allows the user to configure how the total available
bandwidth is split between downstream and upsteam.
ds70-us30 is … | scalar | Enumeration | .1.3.6.1.4.1.4325.3.2.10.5 |
| aniBsuWirelessPtPConfPolarization The antenna polarization. | scalar | Enumeration | .1.3.6.1.4.1.4325.3.2.10.6 |
| aniBsuWirelessPtPConfTargetFrequency The Target Frequency in MHz.
Its range depends on Channel Width.
1) 5.3 GHz UNII Band (5250 - 5350 MHz). The center
frequencies in this band are within 525… | scalar | MHz SNMPv2-TCDisplayString | .1.3.6.1.4.1.4325.3.2.10.7 |
| aniBsuWirelessPtPConfBsuRadioRegPowerLimit It is the maximum power at which the BSU radio is allowed to
transmit. Antenna Gain is added to this maximum power to get
EIRP (Effective Incidental Radiated Power)
Va… | scalar | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4325.3.2.10.8 |
| aniBsuWirelessPtPConfSuRadioRegPowerLimit It is the maximum power at which a SU radio is allowed to
transmit. This information is conveyed to all the SUs via
the CD packet. Antenna Gain is added to this maximum power
t… | scalar | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4325.3.2.10.9 |