BSUWIRELESSIF-MIB Table View

This table contains entries with basic information about 
each BSU Wireless Port.

aniBsuWirelessPortEntry row .1.3.6.1.4.1.4325.3.2.1.1

An entry containing basic information for
this particular wireless port.

Indexes

aniBsuWirelessPort

Column	Syntax	OID
aniBsuWirelessPort The wireless port number.	Enumeration Enumerated Values: 1 wireless-port1 2 wireless-port2 3 wireless-port3 4 wireless-port4 5 wireless-port5 6 wireless-port6	.1.3.6.1.4.1.4325.3.2.1.1.1
aniBsuPortMacAddr The MAC Address of the wireless port. This field is not applicable when BSU is running as a bridge. The agent will display a blank string for this case.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4325.3.2.1.1.2
aniBsuPortState The current state of the wireless port.	Enumeration Enumerated Values: 1 unavailable 2 initial 3 unconfig 4 starting 5 configured-no-radio-detected 6 operational-radio 7 stopped 8 resetting 9 disabled	.1.3.6.1.4.1.4325.3.2.1.1.3
aniBsuPortReset This object is used to reset an individual wireless port. Setting this parameter to true(1) causes the port to reset.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4325.3.2.1.1.4
aniBsuPortFlag This flag is used to turn a particular wireless port on or off, that is, to selectively enable(1) or disable(2) a port. It is valid only for configured ports. By default, all configured ports are enable…	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4325.3.2.1.1.5

This table contains Channel related information 
for each BSU Wireless interface.

aniBsuChannelEntry row .1.3.6.1.4.1.4325.3.2.4.1

An entry containing Channel attributes for
this particular interface.

Indexes

aniBsuWirelessPort

Column	Syntax	OID
aniBsuChannelFrequency The Current Channel Center Frequency in MHz. If no radio is detected, this object will display a value of 0. When Frequency Band is FDD, both transmit and receive frequencies will be displayed in the for…	MHzSNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4325.3.2.4.1.2
aniBsuFrequencyBand The Frequency Band to which the Channel Center Frequency belongs. Valid Range: 1 - 5.3 GHz UNII Band (5250 - 5350 MHz) 12 - 5.3 GHz General Band (5150 - 5350 MHz) 2 - 5.8 GHz UNII Band (5725 - 5825 MHz) …	Enumeration Enumerated Values: 1 unii-5-3GHz 2 unii-5-8GHz 3 general-5-8GHz 4 mmds-2-6GHz 5 general-2-6GHz 6 general-3-5GHz 7 etsi-3-5GHz-50 8 etsi-3-5GHz-100 10 ism-5-8GHz 11 fdd-3-5GHz 12 general-5-3GHz	.1.3.6.1.4.1.4325.3.2.4.1.3
aniBsuChannelWidth The Width of frequency channel in MHz.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4325.3.2.4.1.4
aniBsuNumServFlowsPerSu The number of Service Flows supported per SU.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4325.3.2.4.1.6
aniBsuNumSusSupported The number of SUs supported by this wireless port.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4325.3.2.4.1.7
aniBsuSuRadioRegPowerLimit This parameter constraints the maximum power at which a SU radio can transmit. This information is conveyed to all the SUs within a WSS via the CD packet. It is equal to the EIRP (Effective Incidental Radiated Power) s…	dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4325.3.2.4.1.9
aniBsuTargetFrequency The Current Target Frequency in MHz. To change the configuration of this value, use the object aniBsuWirelessIfConfTargetFrequency for PW1000 (or aniBsuWirelessPtPConfTargetFrequency for PW620). When Fr…	MHzSNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4325.3.2.4.1.10

This table contains QOS Link related information 
for each BSU Wireless port.
          
The total sum of BE, CIR, CBR bandwidths should be 100%.

aniBsuQosLinkEntry row .1.3.6.1.4.1.4325.3.2.6.1

An entry containing QOS Link
attributes for this particular port.

Indexes

aniBsuWirelessPort

Column	Syntax	OID
aniBsuBEBandwidth The BE Bandwidth as a percentage of total bandwidth.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4325.3.2.6.1.1
aniBsuCIRBandwidth The CIR Bandwidth as a percentage of total bandwidth.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4325.3.2.6.1.2
aniBsuCBRBandwidth The CBR Bandwidth as a percentage of total bandwidth.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4325.3.2.6.1.3

This table contains Power Control related information for 
each BSU Wireless port.

aniBsuPowerControlEntry row .1.3.6.1.4.1.4325.3.2.7.1

An entry containing Power Control attributes for this
particular port.

Indexes

aniBsuWirelessPort

Column	Syntax	OID
aniBsuReceivePower This parameter sets the upstream receiver power on the WSS. The range is between -60 to -90 (dBm) It cannot be modified when BSU is in point to point mode.	dBmInteger32r/w Constraints: range: -90--60	.1.3.6.1.4.1.4325.3.2.7.1.2
aniBsuWssRadioRegPowerLimit This parameter constraints the maximum power at which the radio for this WSS can transmit. It is equal to the EIRP (Effective Incidental Radiated Power) specified by the Regulatory Body. Note: If you are …	dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4325.3.2.7.1.3

This table contains Antenna related information for 
each BSU Wireless port.

aniBsuAntennaEntry row .1.3.6.1.4.1.4325.3.2.8.1

An entry containing Antenna attributes for this
particular port.

Indexes

aniBsuWirelessPort

Column	Syntax	OID
aniBsuAntennaDiversityFlag This flag shows whether antenna diversity has been enabled (1) or disabled (2) for this SU.	Enumeration Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4325.3.2.8.1.1
aniBsuAntennaDiversityMode This shows whether diversity is Sync Based (1) or Training Sequence Based (2)	Enumeration Enumerated Values: 1 sync-based 2 training-seq-based	.1.3.6.1.4.1.4325.3.2.8.1.2
aniBsuBcastAntennaPolarization The default broadcast antenna polarization.	Enumeration Enumerated Values: 1 horizontal 2 vertical 3 horizontal-and-vertical	.1.3.6.1.4.1.4325.3.2.8.1.4

This table contains Sector related information for 
each BSU Wireless port.

aniBsuSectorEntry row .1.3.6.1.4.1.4325.3.2.9.1

An entry containing Sector attributes for this
particular port.

Indexes

aniBsuWirelessPort

Column	Syntax	OID
aniBsuSectorName The descriptive name of the sector identified by aniBsuSectorId.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.4325.3.2.9.1.2

This table is used to configure the BSU frequency table.

aniBsuWirelessFreqAdminEntry row .1.3.6.1.4.1.4325.3.2.12.1

An entry containing the frequncy for this
particular index.

Indexes

aniBsuWirelessPort aniBsuWirelessFreqAdminIndex

Column	Syntax	OID
aniBsuWirelessFreqAdminIndex The index for this table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4325.3.2.12.1.1
aniBsuWirelessFreqAdminFreqValue This object is used to configure the desired frequency values for the frequency table. Upto 19 frequency values can be added to the table. All frequencies should belong to the same frequency band. For range and valida…	MHzSNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4325.3.2.12.1.2

This table is used to view the current frequency table.
          
Each entry in the aniBsuWirelessFreqAdminTable has a
corresponding entry in this table. All parameters
within this aniBsuWirelessFreqOperTable have read-only access. 
These objects reflect the actual frequency table values.

aniBsuWirelessFreqOperEntry row .1.3.6.1.4.1.4325.3.2.13.1

An entry containing the frequncy for this
particular index.

Indexes

aniBsuWirelessPort aniBsuWirelessFreqOperIndex

Column	Syntax	OID
aniBsuWirelessFreqOperIndex The index for this table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4325.3.2.13.1.1
aniBsuWirelessFreqOperFreqValue This object displays the current frequency value within the frequency table. To change the configuration of the frequency table, use the aniBsuWirelessFreqAdminTable. The correspoding entry with a read-w…	MHzSNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4325.3.2.13.1.2

This table is used to configure the BSU wireless parameters
per wireless port.

aniBsuWirelessIfConfEntry row .1.3.6.1.4.1.4325.3.2.15.1

An entry for this particular wireless port.

Indexes

aniBsuWirelessPort

Column	Syntax	OID
aniBsuWirelessIfConfTargetFrequency The Target Frequency in MHz. Its range depends on Channel Width. 1) 5.3 GHz UNII Band (5250 - 5350 MHz). The center frequencies in this band are within 5250 + Half of Channel Width MHz a…	MHzSNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4325.3.2.15.1.1
aniBsuWirelessIfConfVerifyAllSu This flag is used to verify if the current set of BSU wireless parameters, that is, aniBsuWirelessPtPConfChannelWidth, aniBsuWirelessPtPConfTargetFrequency, aniBsuWirelessPtPConfBsuId are correctly configured on all th…	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4325.3.2.15.1.2
aniBsuWirelessIfConfSwitchToFrequency The Frequency selected to be switched. This frequency should be either one of the frequency entries in the aniBsuWirelessFreqOperTable or the current target frequency aniBsuTargetFrequency. A get request…	MHzSNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.4325.3.2.15.1.3
aniBsuWirelessIfConfModify This flag is used to modify and commit the changes of the dependent parameters from this group: aniBsuWirelessIfConfTargetFrequency aniBsuWirelessFreqAdminTable Setting this object to true(1) causes the…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4325.3.2.15.1.50

This table is used to configure the BSU wireless AFS parameters
per wireless port.

aniBsuWirelessAFSConfEntry row .1.3.6.1.4.1.4325.3.2.16.1

An entry for this particular wireless port.

Indexes

aniBsuWirelessPort

Column	Syntax	OID
aniBsuWirelessAFSFlag Enable or disable AFS.	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.4325.3.2.16.1.1
aniBsuWirelessAFSMinSwitchDuration Configure AFS minimum switch duration in database (second)	Integer32r/w Constraints: range: 1-600	.1.3.6.1.4.1.4325.3.2.16.1.2
aniBsuWirelessAFSMinNotificationDuration Configure AFS minimum notification duration (second)	Integer32r/w Constraints: range: 1-540	.1.3.6.1.4.1.4325.3.2.16.1.3
aniBsuWirelessAFSErrPercentage Configure AFS minimum error percentage.	Integer32r/w Constraints: range: 1-100	.1.3.6.1.4.1.4325.3.2.16.1.4
aniBsuWirelessAFSMinSwitchBytes Configure AFS minimum switch bytes.	Integer32r/w Constraints: range: 1000-20000	.1.3.6.1.4.1.4325.3.2.16.1.5