aniBsuWirelessPtPConfCellRadius

BSUWIRELESSIF-MIB · .1.3.6.1.4.1.4325.3.2.10.4
MIB view Table view

Object

scalar r/w Enumeration 
The cell radius or link distance
          
Refer to the constraints listed under 
aniBsuWirelessPtPConfChannelWidth description.
          
Note: When this object is changed through SNMP agent,
it is required to upload the configuration (set
aniDevControlStartUpload in the device_control.mib
to true) and then reboot the device for the changes
to take effect.

Context

MIB
BSUWIRELESSIF-MIB
OID
.1.3.6.1.4.1.4325.3.2.10.4
Type
scalar
Access
readwrite
Status
current
Parent
aniBsuWirelessPtPConfGroup
Siblings
13

Syntax

Enumeration

Values & Constraints

Enumerated Values
10000radius10km
20000radius20km
30000radius30km
40000radius40km
50000radius50km
60000radius60km
70000radius70km
80000radius80km
90000radius90km
100000radius100km

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
aniBsuWirelessPtPConfFrequencyBand
The Frequency Band to which the Channel Center Frequency belongs. Valid Range: 1 - 5.3 GHz UNII Band (5250 - 5350 MHz) 12 - 5.3 GHz General Band (5150 - 5350 MHz) 2 - …
scalarEnumeration.1.3.6.1.4.1.4325.3.2.10.1
aniBsuWirelessPtPConfModify
This flag is used to modify and commit the changes of the dependent parameters from this group: aniBsuWirelessPtPConfChannelWidth aniBsuWirelessPtPConfTDDFrameSize aniBsuWireles…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.4325.3.2.10.10
aniBsuWirelessPtPConfBsuId
The unique AP/BSU identifier. This is the AP ID required for generating seed for frequency reuse support. Note: When this object is changed through SNMP agent, it is re…
scalarOctetString.1.3.6.1.4.1.4325.3.2.10.11
aniBsuWirelessPtPConfVerifyAllSu
This flag is used to verify if the current set of BSU wireless parameters, that is, aniBsuWirelessPtPConfChannelWidth, aniBsuWirelessPtPConfTargetFrequency, aniBsuWirelessPtPConf…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.4325.3.2.10.12
aniBsuWirelessPtPConfSwitchToFrequency
The Frequency selected to be switched. This frequency should be either one of the frequency entries in the aniBsuWirelessFreqOperTable or the current target frequency aniBsuTarge…
scalarMHz SNMPv2-TCDisplayString.1.3.6.1.4.1.4325.3.2.10.13
aniBsuWirelessPtPConfSuAFSTimeout
Configure AFS SU Timeout (second)
scalarInteger32.1.3.6.1.4.1.4325.3.2.10.14
aniBsuWirelessPtPConfChannelWidth
The Channel Width. width-2 refers to 2MHz, width-3 refers to 3MHz width-4 refers to 4MHz, width-5 refers to 5MHz,width-6 refers to 6MHz width-7 refers to 7MHz, width-1-75 refers t…
scalarEnumeration.1.3.6.1.4.1.4325.3.2.10.2
aniBsuWirelessPtPConfTDDFrameSize
The total size of the TDD Frame. For PW620, only low-latency and normal-mode are allowed. Also refer to the constraints listed under aniBsuWirelessPtPConfChannelWidth …
scalarEnumeration.1.3.6.1.4.1.4325.3.2.10.3
aniBsuWirelessPtPConfDSUSRatio
The Downstream upstream ratio (DS/US ratio). This allows the user to configure how the total available bandwidth is split between downstream and upsteam. ds70-us30 is …
scalarEnumeration.1.3.6.1.4.1.4325.3.2.10.5
aniBsuWirelessPtPConfPolarization
The antenna polarization.
scalarEnumeration.1.3.6.1.4.1.4325.3.2.10.6
aniBsuWirelessPtPConfTargetFrequency
The Target Frequency in MHz. Its range depends on Channel Width. 1) 5.3 GHz UNII Band (5250 - 5350 MHz). The center frequencies in this band are within 525…
scalarMHz SNMPv2-TCDisplayString.1.3.6.1.4.1.4325.3.2.10.7
aniBsuWirelessPtPConfBsuRadioRegPowerLimit
It is the maximum power at which the BSU radio is allowed to transmit. Antenna Gain is added to this maximum power to get EIRP (Effective Incidental Radiated Power) Va…
scalardBm SNMPv2-SMIInteger32.1.3.6.1.4.1.4325.3.2.10.8
aniBsuWirelessPtPConfSuRadioRegPowerLimit
It is the maximum power at which a SU radio is allowed to transmit. This information is conveyed to all the SUs via the CD packet. Antenna Gain is added to this maximum power t…
scalardBm SNMPv2-SMIInteger32.1.3.6.1.4.1.4325.3.2.10.9