aniBsuWirelessPtPConfBsuId
BSUWIRELESSIF-MIB ·
.1.3.6.1.4.1.4325.3.2.10.11
Object
scalar
r/w
OctetString
The unique AP/BSU identifier.
This is the AP ID required for generating seed for
frequency reuse support.
Note: When this object is changed through SNMP agent,
it is required to upload the configuration (set
aniDevControlStartUpload in the device_control.mib
to true) and then reboot the device for the changes
to take effect.
Context
- MIB
- BSUWIRELESSIF-MIB
- OID
.1.3.6.1.4.1.4325.3.2.10.11- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- aniBsuWirelessPtPConfGroup
- Siblings
- 13
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-14
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aniBsuWirelessPtPConfFrequencyBand The Frequency Band to which the Channel Center Frequency
belongs.
Valid Range:
1 - 5.3 GHz UNII Band (5250 - 5350 MHz)
12 - 5.3 GHz General Band (5150 - 5350 MHz)
2 - … | scalar | Enumeration | .1.3.6.1.4.1.4325.3.2.10.1 |
| aniBsuWirelessPtPConfModify This flag is used to modify and commit the changes of the dependent
parameters from this group:
aniBsuWirelessPtPConfChannelWidth
aniBsuWirelessPtPConfTDDFrameSize
aniBsuWireles… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4325.3.2.10.10 |
| aniBsuWirelessPtPConfVerifyAllSu This flag is used to verify if the current set of BSU
wireless parameters, that is,
aniBsuWirelessPtPConfChannelWidth,
aniBsuWirelessPtPConfTargetFrequency,
aniBsuWirelessPtPConf… | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.4325.3.2.10.12 |
| aniBsuWirelessPtPConfSwitchToFrequency The Frequency selected to be switched.
This frequency should be either one of the frequency entries in the
aniBsuWirelessFreqOperTable or the current target frequency
aniBsuTarge… | scalar | MHz SNMPv2-TCDisplayString | .1.3.6.1.4.1.4325.3.2.10.13 |
| aniBsuWirelessPtPConfSuAFSTimeout Configure AFS SU Timeout (second) | scalar | Integer32 | .1.3.6.1.4.1.4325.3.2.10.14 |
| aniBsuWirelessPtPConfChannelWidth The Channel Width.
width-2 refers to 2MHz, width-3 refers to 3MHz
width-4 refers to 4MHz, width-5 refers to 5MHz,width-6 refers to 6MHz
width-7 refers to 7MHz, width-1-75 refers t… | scalar | Enumeration | .1.3.6.1.4.1.4325.3.2.10.2 |
| aniBsuWirelessPtPConfTDDFrameSize The total size of the TDD Frame.
For PW620, only low-latency and normal-mode are allowed.
Also refer to the constraints listed under
aniBsuWirelessPtPConfChannelWidth … | scalar | Enumeration | .1.3.6.1.4.1.4325.3.2.10.3 |
| aniBsuWirelessPtPConfCellRadius The cell radius or link distance
Refer to the constraints listed under
aniBsuWirelessPtPConfChannelWidth description.
Note: When this object is changed thro… | scalar | Enumeration | .1.3.6.1.4.1.4325.3.2.10.4 |
| aniBsuWirelessPtPConfDSUSRatio The Downstream upstream ratio (DS/US ratio).
This allows the user to configure how the total available
bandwidth is split between downstream and upsteam.
ds70-us30 is … | scalar | Enumeration | .1.3.6.1.4.1.4325.3.2.10.5 |
| aniBsuWirelessPtPConfPolarization The antenna polarization. | scalar | Enumeration | .1.3.6.1.4.1.4325.3.2.10.6 |
| aniBsuWirelessPtPConfTargetFrequency The Target Frequency in MHz.
Its range depends on Channel Width.
1) 5.3 GHz UNII Band (5250 - 5350 MHz). The center
frequencies in this band are within 525… | scalar | MHz SNMPv2-TCDisplayString | .1.3.6.1.4.1.4325.3.2.10.7 |
| aniBsuWirelessPtPConfBsuRadioRegPowerLimit It is the maximum power at which the BSU radio is allowed to
transmit. Antenna Gain is added to this maximum power to get
EIRP (Effective Incidental Radiated Power)
Va… | scalar | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4325.3.2.10.8 |
| aniBsuWirelessPtPConfSuRadioRegPowerLimit It is the maximum power at which a SU radio is allowed to
transmit. This information is conveyed to all the SUs via
the CD packet. Antenna Gain is added to this maximum power
t… | scalar | dBm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4325.3.2.10.9 |