aniBsuWirelessFreqAdminFreqValue

BSUWIRELESSIF-MIB · .1.3.6.1.4.1.4325.3.2.12.1.2
Commands MIB view Table view

Object

column r/w MHzSNMPv2-TCDisplayString 
This object is used to configure the desired frequency 
values for the frequency table. Upto 19 frequency values 
can be added to the table. All frequencies should belong
to the same frequency band. For range and validation,
refer to aniBsuWirelessIfConfTargetFrequency description.
              
Once the values are all added/modified, the object aniBsuWirelessIfConfModify 
(defined in the aniBsuWirelessIfConfTable) needs to be set to true(1). The 
aniBsuWirelessIfConfModify flag is used to modify and commit 
the changes of the dependent wireless parameters including all 
the entries of the aniBsuWirelessFreqAdminTable.
              
If the validation fails when aniBsuWirelessIfConfModify is set 
to true(1), these changes are not commited and an error is returned.
In that case, the modified parameters in this table may not
reflect the correct values. They will display the values last
configured by the user, rather than the actual values on the device.
To view the current values, refer to the aniBsuWirelessFreqOperTable.
Each entry in this aniBsuWirelessFreqAdminTable has a
corresponding entry displaying the actual values in the 
aniBsuWirelessFreqOperTable.

Context

MIB
BSUWIRELESSIF-MIB
OID
.1.3.6.1.4.1.4325.3.2.12.1.2
Type
column
Access
readwrite
Status
current
Units
MHz
Parent
aniBsuWirelessFreqAdminEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BSUWIRELESSIF-MIB' -M '/opt/observium/mibs/aperto:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BSUWIRELESSIF-MIB::aniBsuWirelessFreqAdminFreqValue'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'BSUWIRELESSIF-MIB' -M '/opt/observium/mibs/aperto:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BSUWIRELESSIF-MIB::aniBsuWirelessFreqAdminFreqValue.<aniBsuWirelessPort>.<aniBsuWirelessFreqAdminIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'BSUWIRELESSIF-MIB' -M '/opt/observium/mibs/aperto:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'BSUWIRELESSIF-MIB::aniBsuWirelessFreqAdminFreqValue'

Syntax

MHzSNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255