brcdRouteMapSetValue

This object specifies the value corresponding to the
brcdRouteMapSetType.
setAsPath ֠Identifies the prepend string for BGP AS path attribute.
The value is the string representation of BGP AS number to be
prepended with the AS Path.
If the value specified is the string ҴagҠinstead of the AS path
number then itwill set the tag as an AS path attribute.
              
setAutomaticTag ֠Specifies that the routemap tag is to be computed
automatically.  Value is string representation of a truth value 1.
This object will not be present if it is not configured. Truth value
of 0 can be used to mark its deletion. 
              
setDeleteCommunityList ֠Specifies the name of the BGP community
List to be set for deletion.
              
setCommunityNumber ֠Specifies the BGP community number to be added.
Format is either ӁA:NNҠor '<community number>'.
              
setCommunityFlag ֠This value relates to setCommunityNumber.  It
specifies that the BGP community in setCommunityNumber have the
following behavior noExport(1),noAdvertise(2), localAs(3),additive(4).
The value is string representation of one of the above decimal values.
For additive(4), the value is followed by the community number in either
'AA:NN' or <community number> format.
              
setDampening ֠It consists of four values separated by space.
The first value specifies the string representation of decimal value
for BGP route flap dampening. It should be enabled with half-time in
minutes for the penalty.  Default value is 15 minutes. Valid range is
1-45.
The second value relates to the 1st value and specifies the string
representation of the value to start reusing a BGP route.  Default is
750, with each flap penalty as 1000. Valid range is 1-20000.
The third value relates to the 1st value and specifies the string
representation of value to start suppressing a BGP route. Default
is 2000, with each flap penalty as 1000. Valid range is 1-20000.
The Fourth value relates to the 1st value and specifies the string
representation of maximum duration in minutes to suppress a stable
route. Default is 40. Valid range is 1-255.
If a value is not provided then the default value will be picked up.
              
setDistance ֠Specifies the string representation of admin distance to
be set for matching OSPF routes.
              
setExtCommunityRT ֠Specifies one or more (separated by space)  VPN
extended community attributes.  Each VPN community is of format ҁSN:nnҮ
              
setExtCommunityRTAdditive ֠This object is related to earlier object
setExtCommunityRT.  It specifies that the VPN communities in earlier
should be added to the existing extended community. 
              
setExtCommunitySOO ֠Specifies site-of-origin VPN extended community attributes. The VPN community is
of format ҁSN:nnҮ
              
setOutputInterfaces ֠Identifies the list of output IfIndices.
Value 0 matches to null0 interface.  Each IfIndex is a 32-bit integer in
big endian order.  One or more Interface IfIndices can be specified by
separating each IfIndex by one or more spaces.  If the ifIndex is not
null0 then the preserve-vlan flag is mandatory and which is always
implicitly set.
              
setNextHopIpv4Addr ֠Identifies the string representation of the next
hop ipv4 address without preserve vlan flag.
              
setNextHopIpv4AddrWithPreserveVlan ֠Identifies the string
representation of the next hop ipv4 address with preserve vlan flag.
              
setNextHopIpv6Addr ֠Identifies the string representation of the next
hop ipv6 address without preserve vlan flag.
              
setNextHopIpv6AddrWithPreserveVlan ֠Identifies the string representation
of the next hop ipv6 address with preserve vlan flag.
              
setNextHopIpPeerAddr ֠The value is string representation of truth value.
Identifies that the next hop is BGP IPv4 peer address. When set to Ѱҍ
this object is deleted.
              
setIsisLevel ֠Identifies the level to which the ISIS route to import.
The value is string representation of one of the following decimal values,
level1(1), level2(2) level1or2(3).
              
setLocalPreference ֠Identifies the BGP local preference path attribute
value to be set.  The value is string representation of the decimal
preference value.
              
setMetricType ֠Specifies the route metric type for the destination
routing protocol.  Value is string representation of one of the
following internal(1), external(2), type1(3), type2(4).
              
setMetric ֠Specifies the metric value set for the destination routing
protocol.  Value is string representation of the following:
<n>: Metric value
+<n>: Add <n> to metric
-<n>: Subtract <n> to metric
None: remove metric value
              
setNextHopFloodVlan ֠Specifies the next hop vlan without preserve vlan
to be set.  Value is string representation of vlan Id (1-4090)
              
setNextHopFloodVlanPreserveVlan ֠Specifies the next hop vlan with preserve
vlan to be set.  Value is string representation of vlan Id (1-4090)
              
setNextHopFloodVlanOutgoingDa ֠Specifies the next hop vlan with outgoing
destination address flag set. Value is string representation of vlan id (1-4090) 
followed with MAC address.
              
setNextHopIpTunnel ֠ Specifies the next hop IP tunnel, it can only be
configured for configured GRE tunnels.  The value is string representation
of decimal tunnel ID
              
setNextHopLsp ֠Specifies the next hop LSP name.
              
setBgpOrigin ֠Specifies the BGP origin code.  The value is string
representation of one the following decimal value, igp(1), incomplete(2)
              
setTag ֠Specifies the string representation of the decimal tag value
for the destination routing protocol.
              
setWeight ֠Specifies the string representation of the decimal value for
BGP weight for the routing table.

MIB

BROCADE-ROUTEMAP-MIB

OID

.1.3.6.1.4.1.1991.1.1.3.39.1.1.3.1.3

Type

column

Access

readwrite

Status

current

Parent

brcdRouteMapSetEntry

Table

brcdRouteMapSetTable

Siblings

4