BROCADE-ROUTEMAP-MIB Table View

This table contains the routemap entries.

brcdRouteMapEntry row .1.3.6.1.4.1.1991.1.1.3.39.1.1.1.1

A row in this table represents a routemap entry.

Indexes

brcdRouteMapName brcdRouteMapSequence

Column	Syntax	OID
brcdRouteMapName Identifies the route map. In NetIron, the name can have max 80 characters.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1991.1.1.3.39.1.1.1.1.1
brcdRouteMapSequence Identifies the sequence to insert to/delete from existing route-map entry.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.39.1.1.1.1.2
brcdRouteMapAction Identifies the action to be taken for this Route Map entry.	FOUNDRY-SN-IP-ACL-MIBActionr/w Type Values: 0 deny 1 permit	.1.3.6.1.4.1.1991.1.1.3.39.1.1.1.1.3
brcdRouteMapRuleName Identifies the path name for this map. Max size is 127. This object is not supported in CES/CER platform.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1991.1.1.3.39.1.1.1.1.4
brcdRouteMapRowStatus Setting this object to createAndGo(4) results in addition of new row. Setting this object to destroy( 6)results in removal of a row. The value active(1) is returned for get and get-next requests. Other values in the enu…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1991.1.1.3.39.1.1.1.1.5

RouteMap Match Clause Config Table for a given routemap.

brcdRouteMapMatchEntry row .1.3.6.1.4.1.1991.1.1.3.39.1.1.2.1

A row in this table represents a routemap match clause entry.
Before creating an instance row in this table using a name, a
corresponding entry with that name needs to be existing in the
brcdRouteMapTable.

Indexes

brcdRouteMapName brcdRouteMapSequence brcdRouteMapMatchSequence brcdRouteMapMatchType

Column	Syntax	OID
brcdRouteMapMatchSequence This object identifies the position in this table where this match rule is added. This is running integer. If the brcdRouteMapMatchRowStatus is createAndGo then the row is inserted if there is no match rule is present …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.1.3.39.1.1.2.1.1
brcdRouteMapMatchType A pair of brcdRouteMapMatchType and brcdRouteMapMatchValue objects specifies a particular match clause.	Enumeration Enumerated Values: 0 matchUndefined 1 matchAsPath 2 matchBgpCommunityName 3 matchBgpCommunityNameExact 4 matchBgpExtCommunityNumber 5 matchInterfaces 6 matchIpv4AddressAclNames 7 matchIpv4AddressAclNumbers 8 matchIpv4AddressPrefixList 9 matchIpv4NextHopAclNames 10 matchIpv4NextHopAclNumbers 11 matchIpv4NextHopPrefixList 12 matchIpv4RouteSourceAclNames 13 matchIpv4RouteSourceAclNumbers 14 matchIpv4RouteSourcePrefixList 15 matchIpv6AddressAclNames 16 matchIpv6AddressPrefixList 17 matchIpv6NextHopPrefixList 18 matchIpv6RouteSourcePrefixList 19 matchMetric 20 matchRoutingProtocol 21 matchRouteType 22 matchTags	.1.3.6.1.4.1.1991.1.1.3.39.1.1.2.1.2
brcdRouteMapMatchValue This object specifies the value corresponding to the brcdRouteMapMatchType. matchAsPath - Identifies one or more BGP AS Paths to be matched. This list of AS Path names are separated by one or more spaces.…	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1991.1.1.3.39.1.1.2.1.3
brcdRouteMapMatchCliString This is read-only object. This object is for informative purpose only. For a pair of brcdRouteMapMatchType and brcdRouteMapMatchValue, this object represents equivalent CLI routemap match command.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1991.1.1.3.39.1.1.2.1.4
brcdRouteMapMatchRowStatus Setting this object to createAndGo(4) results in addition of new row. Setting this object to destroy( 6)results in removal of a row. The value active(1) is returned for get and get-next requests. Other values in the enu…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1991.1.1.3.39.1.1.2.1.5

RouteMap Set Clause Config Table for a given routemap.

brcdRouteMapSetEntry row .1.3.6.1.4.1.1991.1.1.3.39.1.1.3.1

A row in this table represents a routemap set clause entry.
Before creating an instance row in this table using a name, a
corresponding entry with that name needs to be existing in the
brcdRouteMapTable.

Indexes

brcdRouteMapName brcdRouteMapSequence brcdRouteMapSetSequence brcdRouteMapSetType

Column	Syntax	OID
brcdRouteMapSetSequence This object identifies the position in this table where this match rule is added. This is running integer. If the brcdRouteMapSetRowStatus is createAndGo then the row is inserted if there is no match rule is present a…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1991.1.1.3.39.1.1.3.1.1
brcdRouteMapSetType A pair of brcdRouteMapSetType and brcdRouteMapSetValue objects specifies a particular set clause.	Enumeration Enumerated Values: 0 setUnDefinedType 1 setAsPath 2 setAutomaticTag 3 setDeleteCommunityList 4 setCommunityNumber 5 setCommunityFlag 6 setDampening 7 setDistance 8 setExtCommunityRT 9 setExtCommunityRTAdditive 10 setExtCommunitySOO 11 setOutputInterfaces 12 setNextHopIpv4Addr 13 setNextHopIpv4AddrWithPreserveVlan 14 setNextHopIpv6Addr 15 setNextHopIpv6AddrWithPreserveVlan 16 setNextHopIpPeerAddr 17 setIsisLevel 18 setLocalPreference 19 setMetricType 20 setMetric 21 setNextHopFloodVlan 22 setNextHopFloodVlanPreserveVlan 23 setNextHopFloodVlanOutgoingDa 24 setNextHopIpTunnel 25 setNextHopLsp 26 setBgpOrigin 27 setTag 28 setWeight	.1.3.6.1.4.1.1991.1.1.3.39.1.1.3.1.2
brcdRouteMapSetValue This object specifies the value corresponding to the brcdRouteMapSetType. setAsPath ֠Identifies the prepend string for BGP AS path attribute. The value is the string representation of BGP AS number to be prepended with …	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1991.1.1.3.39.1.1.3.1.3
brcdRouteMapSetCliString This is read-only object. This object is for informative purpose only. For a pair of brcdRouteMapSetType and brcdRouteMapSetValue, this object represents equivalent CLI routemap set command.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1991.1.1.3.39.1.1.3.1.4
brcdRouteMapSetRowStatus Setting this object to createAndGo(4) results in addition of new row. Setting this object to destroy( 6)results in removal of a row. The value active(1) is returned for get and get-next requests. Other values in the enu…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1991.1.1.3.39.1.1.3.1.5

This table contains the bindings for routemap entries to interfaces.
Only one route map can be bounded to a given interface. Attempting
to bind a second routemap to the same interface will return an error.

brcdRouteMapBindEntry row .1.3.6.1.4.1.1991.1.1.3.39.1.1.4.1

A row in this table represents a binding of a routemap to one interface.

Indexes

brcdRouteMapBindIfIndex brcdRouteMapBindIpType

Column	Syntax	OID
brcdRouteMapBindIfIndex Identifies the interface to bind a routemap. The interface can only be of type physical or virtual.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.1991.1.1.3.39.1.1.4.1.1
brcdRouteMapBindIpType Identifies the IP type for the bind. Route map can be bound only to ipv4 or ipv6 policy.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.1991.1.1.3.39.1.1.4.1.2
brcdRouteMapBindMapName Identifies the route map name. In NetIron, the name can have max 80 characters.	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1991.1.1.3.39.1.1.4.1.3
brcdRouteMapBindRowStatus Setting this object to createAndGo(4) results in addition of new row. Setting this object to destroy( 6)results in removal of a row. The value active(1) is returned for get and get-next requests. Other values in the enu…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.1991.1.1.3.39.1.1.4.1.4

This table contains the various route map rule entries.
A routemap rule instance (map and sequence number) can
have only one rule name. The same rule name could be
applied to multiple routemaps

brcdRMapRuleDisplayEntry row .1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1

A row in this table represents a route map rule entry.

Indexes

brcdRMapRuleDisplayRuleName brcdRMapRuleDisplayRouteMapName brcdRMapRuleDisplaySequence brcdRMapRuleDisplayIpType

Column	Syntax	OID
brcdRMapRuleDisplayRuleName Identifies the rule name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1.1
brcdRMapRuleDisplayRouteMapName Identifies the route map that has this rule.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1.2
brcdRMapRuleDisplaySequence Identifies the instance sequence number.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1.3
brcdRMapRuleDisplayIpType Identifies the IP type for the Rule Display (1(ipv4), or 2(ipv6)). A row is present if the corresponding ipv4 or ipv6 AclMatchFilter is present.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1.4
brcdRMapRuleDisplayInputInterfaceList A list of space separated interface indices which are the port membership of this rule. An * here means the path is configured but disabled.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1.5
brcdRMapRuleDisplayAclMatchFilter The list of space separated ACL match filters name or number used in this rule.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1.6
brcdRMapRuleDisplayOutputVlan Identifies the next-hop-flood VLAN selected (by the interface card). Empty string will be returned if there is no value.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1.7
brcdRMapRuleDisplayOutputPort A list of space separated egress interfaces selected (by the interface card). Empty string will be returned if there is no value.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1.8
brcdRMapRuleDisplayOutputIPAddress A list of space separated selected IPv4 next-hop or IPv6 next-hop address.Empty string will be returned if there is no value.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1991.1.1.3.39.1.2.1.1.9