rlPolicySimpleBcmMibRulesStatus

BROADCOM-MIB · .1.3.6.1.4.1.89.68.2.5.1.21

Object

column r/w SNMPv2-TCRowStatus

The status of a table entry.
It is used to delete an entry from this table.
notInService is used to disable an entry.
notReady will be assigned by the device to indicate that the rule
can not be active because some ports in the output ports list are not
in a state allowing bandwidth allocation guarantee.

Context

MIB: BROADCOM-MIB
OID: .1.3.6.1.4.1.89.68.2.5.1.21
Type: column
Access: readwrite
Status: current
Parent: rlPolicySimpleBcmMibRulesEntry
Table: rlPolicySimpleBcmMibRulesTable
Siblings: 20

Syntax

SNMPv2-TCRowStatus

Source: SNMPv2-TCRowStatus
Base type: Enumeration

Values & Constraints

Type Values

`1`	active
`2`	notInService
`3`	notReady
`4`	createAndGo
`5`	createAndWait
`6`	destroy

Related Objects

Sibling Objects

Object	Type	Syntax	OID
rlPolicySimpleBcmMibRulesIndex This enumerates the table. The user should assign indices in such a way that there will be a gap big enough between one rule and the next to allow insertion of additional rules in…	column	Integer32	`.1.3.6.1.4.1.89.68.2.5.1.1`
rlPolicySimpleBcmMibRulesSrcIp Indicate the srcIp to compare	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.89.68.2.5.1.10`
rlPolicySimpleBcmMibRulesSrcIpMask Indicates the number of most significant bits of the Ip Address that are used in specifying IP source addresses in classifiers.	column	Integer32	`.1.3.6.1.4.1.89.68.2.5.1.11`
rlPolicySimpleBcmMibRulesDstIp Indicate the DstIp to compare	column	SNMPv2-SMIIpAddress	`.1.3.6.1.4.1.89.68.2.5.1.12`
rlPolicySimpleBcmMibRulesDstIpMask Indicates the number of most significant bits of the Ip Address that are used in specifying IP destination addresses in classifiers.	column	Integer32	`.1.3.6.1.4.1.89.68.2.5.1.13`
rlPolicySimpleBcmMibRulesSrcPort Indicate the Src port to compare	column	Integer32	`.1.3.6.1.4.1.89.68.2.5.1.14`
rlPolicySimpleBcmMibRulesDstPort Indicate the Src port to compare	column	Integer32	`.1.3.6.1.4.1.89.68.2.5.1.15`
rlPolicySimpleBcmMibRulesInIfIndexList Indicates the list of input ports to which this rule applies.	column	Q-BRIDGE-MIBPortList	`.1.3.6.1.4.1.89.68.2.5.1.16`
rlPolicySimpleBcmMibRulesOutIfIndexList Indicates the list of output ports to on which bandwidth should be allocated for this rule.	column	Q-BRIDGE-MIBPortList	`.1.3.6.1.4.1.89.68.2.5.1.17`
rlPolicySimpleBcmMibRulesAction Indicates the action to be performed if there is a match with the rule.	column	Enumeration	`.1.3.6.1.4.1.89.68.2.5.1.18`
rlPolicySimpleBcmMibRulesProfilePointer Indicates the profile attached to the rule. The value is the index in the profile table of the attached profile. Value 0 means that no profile is attached to the rule and is valid…	column	Integer32	`.1.3.6.1.4.1.89.68.2.5.1.19`
rlPolicySimpleBcmMibRulesDescription Informational text given by the user to describe the rule.	column	OctetString	`.1.3.6.1.4.1.89.68.2.5.1.2`
rlPolicySimpleBcmMibRulesBitsUsed a bit mask that indicates the the used fields for the entry: (the implemention is identical to BITS implementation,from MSB to LSB) ---------- \|87654321\| ---------- 8 - Vpt 7…	column	OctetString	`.1.3.6.1.4.1.89.68.2.5.1.20`
rlPolicySimpleBcmMibRulesDstMac Indicate the Dst mac to compare	column	OctetString	`.1.3.6.1.4.1.89.68.2.5.1.3`
rlPolicySimpleBcmMibRulesSrcMac Indicate the source mac to compare	column	OctetString	`.1.3.6.1.4.1.89.68.2.5.1.4`
rlPolicySimpleBcmMibRulesVpt Indicate the Vlan priority tag to compare	column	Integer32	`.1.3.6.1.4.1.89.68.2.5.1.5`
rlPolicySimpleBcmMibRulesVid Indicate the vlanId to compare	column	Integer32	`.1.3.6.1.4.1.89.68.2.5.1.6`
rlPolicySimpleBcmMibRulesEthType Indicate the Ethernet type of the packet. 0 means that this field is not used	column	Integer32	`.1.3.6.1.4.1.89.68.2.5.1.7`
rlPolicySimpleBcmMibRulesTosOrDscp Indicates the tos or dscp to compare	column	Integer32	`.1.3.6.1.4.1.89.68.2.5.1.8`
rlPolicySimpleBcmMibRulesProtocol Indicates the protocol to compare	column	Integer32	`.1.3.6.1.4.1.89.68.2.5.1.9`