BROADCOM-MIB Table View

The table defines all the profiles.

rlPolicySimpleBcmMibProfileEntry row .1.3.6.1.4.1.89.68.2.4.1

The entry define one profile.

Indexes

rlPolicySimpleBcmMibIndex

Column	Syntax	OID
rlPolicySimpleBcmMibIndex This enumerates the table entry.	Integer32 Constraints: range: 1-1048576	.1.3.6.1.4.1.89.68.2.4.1.1
rlPolicySimpleBcmMibDescription Informational text given by the user to describe the profile.	OctetStringr/w Constraints: range: 0-40	.1.3.6.1.4.1.89.68.2.4.1.2
rlPolicySimpleBcmMibProfileType Specifies a profile type.	RlPolicySimpleBcmMibProfileTyper/w Type Values: 1 bandwidthGuarantee 2 minDelay 3 bestEffort	.1.3.6.1.4.1.89.68.2.4.1.3
rlPolicySimpleBcmMibRate The rate in kilobytes/second for the specified profile, or in the case of minDelay per session profile type the rate will indicate the rate per individual session	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.89.68.2.4.1.4
rlPolicySimpleBcmMibBurstSize The burst size parameter. A value of 0 means that the device should choose the Burst Size that is most suitable for the profile.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.89.68.2.4.1.5
rlPolicySimpleBcmMibChangeTosOrDscp Indicates whether the TOS or DSCP should be remarked with a new value	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.68.2.4.1.6
rlPolicySimpleBcmMibNewTosOrDscp Indicates the new value for the TOS or DSCP. Relevant only if rlPolicySimpleBcmMibChangeTosOrDscp is true.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.89.68.2.4.1.7
rlPolicySimpleBcmMibStatus The status of a table entry. It is used to delete an entry from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.68.2.4.1.8

This table contains the policy rules defined by the user. The order
of the entries in the table is important, since the first rule that
applies to the incoming packet will be acted upon, ignoring any
further rules that may apply as well.

rlPolicySimpleBcmMibRulesEntry row .1.3.6.1.4.1.89.68.2.5.1

This entry defines one policy rule.

Indexes

rlPolicySimpleBcmMibRulesIndex

Column	Syntax	OID
rlPolicySimpleBcmMibRulesIndex This enumerates the table. The user should assign indices in such a way that there will be a gap big enough between one rule and the next to allow insertion of additional rules in between (a gap of 1000 is recommended).	Integer32 Constraints: range: 1-1048576	.1.3.6.1.4.1.89.68.2.5.1.1
rlPolicySimpleBcmMibRulesDescription Informational text given by the user to describe the rule.	OctetStringr/w Constraints: range: 0-40	.1.3.6.1.4.1.89.68.2.5.1.2
rlPolicySimpleBcmMibRulesDstMac Indicate the Dst mac to compare	OctetStringr/w Constraints: range: 0-6	.1.3.6.1.4.1.89.68.2.5.1.3
rlPolicySimpleBcmMibRulesSrcMac Indicate the source mac to compare	OctetStringr/w Constraints: range: 0-6	.1.3.6.1.4.1.89.68.2.5.1.4
rlPolicySimpleBcmMibRulesVpt Indicate the Vlan priority tag to compare	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.89.68.2.5.1.5
rlPolicySimpleBcmMibRulesVid Indicate the vlanId to compare	Integer32r/w Constraints: range: 0-4095	.1.3.6.1.4.1.89.68.2.5.1.6
rlPolicySimpleBcmMibRulesEthType Indicate the Ethernet type of the packet. 0 means that this field is not used	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.89.68.2.5.1.7
rlPolicySimpleBcmMibRulesTosOrDscp Indicates the tos or dscp to compare	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.89.68.2.5.1.8
rlPolicySimpleBcmMibRulesProtocol Indicates the protocol to compare	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.89.68.2.5.1.9
rlPolicySimpleBcmMibRulesSrcIp Indicate the srcIp to compare	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.89.68.2.5.1.10
rlPolicySimpleBcmMibRulesSrcIpMask Indicates the number of most significant bits of the Ip Address that are used in specifying IP source addresses in classifiers.	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.89.68.2.5.1.11
rlPolicySimpleBcmMibRulesDstIp Indicate the DstIp to compare	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.89.68.2.5.1.12
rlPolicySimpleBcmMibRulesDstIpMask Indicates the number of most significant bits of the Ip Address that are used in specifying IP destination addresses in classifiers.	Integer32r/w Constraints: range: 0-32	.1.3.6.1.4.1.89.68.2.5.1.13
rlPolicySimpleBcmMibRulesSrcPort Indicate the Src port to compare	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.89.68.2.5.1.14
rlPolicySimpleBcmMibRulesDstPort Indicate the Src port to compare	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.89.68.2.5.1.15
rlPolicySimpleBcmMibRulesInIfIndexList Indicates the list of input ports to which this rule applies.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.89.68.2.5.1.16
rlPolicySimpleBcmMibRulesOutIfIndexList Indicates the list of output ports to on which bandwidth should be allocated for this rule.	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.89.68.2.5.1.17
rlPolicySimpleBcmMibRulesAction Indicates the action to be performed if there is a match with the rule.	Enumerationr/w Enumerated Values: 1 block 2 blockAndTrap 3 permitAndTrap 4 permit	.1.3.6.1.4.1.89.68.2.5.1.18
rlPolicySimpleBcmMibRulesProfilePointer Indicates the profile attached to the rule. The value is the index in the profile table of the attached profile. Value 0 means that no profile is attached to the rule and is valid only in case of action block.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.89.68.2.5.1.19
rlPolicySimpleBcmMibRulesBitsUsed a bit mask that indicates the the used fields for the entry: (the implemention is identical to BITS implementation,from MSB to LSB) ---------- |87654321| ---------- 8 - Vpt 7 - Vid 6 - tosOrDscp 5 - Protocol 4 -…	OctetStringr/w Constraints: range: 1-1	.1.3.6.1.4.1.89.68.2.5.1.20
rlPolicySimpleBcmMibRulesStatus The status of a table entry. It is used to delete an entry from this table. notInService is used to disable an entry. notReady will be assigned by the device to indicate that the rule can not be active because some port…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.68.2.5.1.21

The table defines all the rate-limit and qos profiles.

rlBcmQoSRateLimitEntry row .1.3.6.1.4.1.89.68.4.2.1

The entry define one profile.

Indexes

rlBcmQoSRateLimitType rlBcmQoSRateLimitName rlBcmQoSRateLimitIndex

Column	Syntax	OID
rlBcmQoSRateLimitType Specifies a profile's type.	RlBcmQoSRateLimitTyper/w Type Values: 1 aggregate 2 flowAggregate 3 perFlow 4 multiField 5 inPort 6 outPort 7 qosIP 8 qosIPAcl	.1.3.6.1.4.1.89.68.4.2.1.1
rlBcmQoSRateLimitName Name of a profile.	OctetStringr/w Constraints: range: 0-40	.1.3.6.1.4.1.89.68.4.2.1.2
rlBcmQoSRateLimitIndex Unique index for this profile. This index is used to have several profiles with same name.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.4.2.1.3
rlBcmQoSRateLimitAclsNameOrFlow This is a ACL name's list or codded IP flow for multiField and qosIP profiles.	OctetStringr/w Constraints: range: 0-100	.1.3.6.1.4.1.89.68.4.2.1.4
rlBcmQoSRateLimitPortsOrInterfaces This is port's list or ip interafce name's list.	OctetStringr/w Constraints: range: 0-100	.1.3.6.1.4.1.89.68.4.2.1.5
rlBcmQoSRateLimitRatePriority The rate in for the rate-limit profile or priority for qos one.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.4.2.1.6
rlBcmQoSRateLimitBurstSizeTosMask The burst size parameter in a bytes for rate-limit profiles and TOS mask for qos profiles.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.4.2.1.7
rlBcmQoSRateLimitDropOutProfile Indicates whether the OUT profile packets will be droped or no.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.89.68.4.2.1.8
rlBcmQoSRateLimitNewTos Indicates the new value for the TOS of packets. Value > 63 means not change ToS.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.4.2.1.9
rlBcmQoSRateLimitNewTosPrecedence Indicates the new value for the TOS precedence. Value > 15 means not change ToS precedence.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.4.2.1.10
rlBcmQoSRateLimitStatus The status of a table entry. It is used to delete an entry from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.68.4.2.1.11

The table defines ACLs which are applied to profiles.

rlBcmQoSRateLimitAclApplliedEntry row .1.3.6.1.4.1.89.68.4.3.1

The entry define one profile.

Indexes

rlBcmQoSRateLimitAclName rlBcmQoSRateLimitAclApplliedIfIndex

Column	Syntax	OID
rlBcmQoSRateLimitAclName Name of a ACL which defines flow.	OctetStringr/w Constraints: range: 0-40	.1.3.6.1.4.1.89.68.4.3.1.1
rlBcmQoSRateLimitAclApplliedIfIndex Unique index which is point to a profile.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.4.3.1.2
rlBcmQoSRateLimitAclApplliedType This field defines type of application - qos or rate-limit or both.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.4.3.1.3
rlBcmQoSRateLimitAclApplliedStatus The status of a table entry. It is used to delete an entry from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.68.4.3.1.4

This table contains IP flows defined by the user.
An entries of this table are used for QoS and Rate-limit
profiles.

rlBcmQoSRateLimitIPflowEntry row .1.3.6.1.4.1.89.68.4.4.1

This entry defines one policy rule.

Indexes

rlBcmQoSRateLimitIPflowTos rlBcmQoSRateLimitIPflowTosMask rlBcmQoSRateLimitIPflowProtocol rlBcmQoSRateLimitIPflowSrcIp rlBcmQoSRateLimitIPflowSrcIpMask rlBcmQoSRateLimitIPflowDstIp rlBcmQoSRateLimitIPflowDstIpMask rlBcmQoSRateLimitIPflowSrcPort rlBcmQoSRateLimitIPflowDstPort rlBcmQoSRateLimitInIfindex rlBcmQoSRateLimitOutIfindex

Column	Syntax	OID
rlBcmQoSRateLimitIPflowTos Tos byte of a flow. Value must be in range 0-255. Value > 256 means any tos	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.4.4.1.1
rlBcmQoSRateLimitIPflowTosMask Mask which is applied to TOS byte of a flow. Value must be in range 0-255. Value > 256 means any tos	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.4.4.1.2
rlBcmQoSRateLimitIPflowProtocol Protocol of a IP flow.Value must be in range 0-255. Value > 256 means any IP protocol	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.4.4.1.3
rlBcmQoSRateLimitIPflowSrcIp Indicate the srcIp of a flow. 0.0.0.0 means any source address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.89.68.4.4.1.4
rlBcmQoSRateLimitIPflowSrcIpMask Indicates the number of most significant bits of the Ip Address that are used in specifying IP source addresses in classifiers.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.89.68.4.4.1.5
rlBcmQoSRateLimitIPflowDstIp Indicate the DstIp to compare	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.89.68.4.4.1.6
rlBcmQoSRateLimitIPflowDstIpMask Indicates the number of most significant bits of the Ip Address that are used in specifying IP destination addresses in classifiers.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.89.68.4.4.1.7
rlBcmQoSRateLimitIPflowSrcPort Indicate the Src port to compare. Value must be in range 0-65535. Value > 65536 means any src port	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.4.4.1.8
rlBcmQoSRateLimitIPflowDstPort Indicate the Src port to compare. Value must be in range 0-65535. Value > 65536 means any src port.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.4.4.1.9
rlBcmQoSRateLimitInIfindex This is input IfIndex for flow.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.4.4.1.10
rlBcmQoSRateLimitOutIfindex This is output IfIndex for flow.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.4.4.1.11
rlBcmQoSRateLimitIPFlowType This is type of flow.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.4.4.1.12
rlBcmQoSRateLimitIPFlowRule This is rule's index of flow.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.4.4.1.13
rlBcmQoSRateLimitIPflowStatus The status of a table's entry. It is used to delete an entry from this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.68.4.4.1.14

This table hold information the over priority maps

rlTosOverwriteMapEntry row .1.3.6.1.4.1.89.68.5.1.1

The row definition for this table.

Indexes

rlTosOverwriteMapName rlTosOverwriteMapRange

Column	Syntax	OID
rlTosOverwriteMapName The map name	OctetString Constraints: range: 1-25	.1.3.6.1.4.1.89.68.5.1.1.1
rlTosOverwriteMapRange value of the byte in the map	Enumerationr/w Enumerated Values: 7 bits 63 tos 255 byte	.1.3.6.1.4.1.89.68.5.1.1.2
rlTosOverwriteMapMapping The map holding the queue	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.89.68.5.1.1.3
rlTosOverwriteMapPortList the ports that the map, is applied on	Q-BRIDGE-MIBPortListr/w	.1.3.6.1.4.1.89.68.5.1.1.4
rlTosOverwriteMapStatus The status of the table entry. It's used to delete an entry	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.68.5.1.1.5

This table stores names and IDs of ACLs. This table
is used to convert ACL name to a ACL ID. ACL ID is
used in all other tables to identify a particular ACL.
The ACL ID is set to ACL name automatically by SW.

rlBcmACLNamesEntry row .1.3.6.1.4.1.89.68.6.3.1

The row definition for this table.

Indexes

rlBcmACLNamesName

Column	Syntax	OID
rlBcmACLNamesName The ACL name. User identifies ACL by it's unique name.	OctetString Constraints: range: 1-25	.1.3.6.1.4.1.89.68.6.3.1.1
rlBcmACLNamesID The ID of ACL. It is unique value for each ACL name. The ID is defined by SW during new entry creation.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.6.3.1.2
rlBcmACLNamesStatus The status of the table entry. It's used to delete an entry. Only two status are aceptable: CreateAndGo, Destroy. All other values cause error.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.68.6.3.1.3

This table defines entries in ACLs.

rlBcmACLEntry row .1.3.6.1.4.1.89.68.6.4.1

The row definition for this table.

Indexes

rlBcmAclID rlBcmAclRowIndex

Column	Syntax	OID
rlBcmAclID The ID of ACL. It is unique value for each ACL name. The ID must accord to one in the ACL name table.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.6.4.1.1
rlBcmAclRowIndex Unique identification of a particular entry in an ACL. This index is equal to row number in the acl lcli commands. The value of this field starts from 1 up to rlBcmACLMaxNumberOfEntries. Each entry defines classication …	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.6.4.1.2
rlBcmAclAction The permissions/restrictions given to this entry.	Enumerationr/w Enumerated Values: 1 permit 2 permitAndLog 3 deny 4 denyAndLog 5 logAndContinue	.1.3.6.1.4.1.89.68.6.4.1.3
rlBcmAclIPflags Indicate 3-bits IP header flags to compare.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.89.68.6.4.1.4
rlBcmAclIPflagsMask Indicate 3-bits mask for IP header flags to compare. Value 0 means Any IP flags.	Integer32r/w Constraints: range: 0-7	.1.3.6.1.4.1.89.68.6.4.1.5
rlBcmAclIPfragOffset Indicate 13-bits IP header offset to compare.	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.89.68.6.4.1.6
rlBcmAclIPfragOffsetMask Indicate 13-bits mask for IP header offset to compare. Value 0 means Any IP offset.	Integer32r/w Constraints: range: 0-8191	.1.3.6.1.4.1.89.68.6.4.1.7
rlBcmAclIPprotocol Indicate IP protocol to compare. Value 256 means Any ip protocol.	Integer32r/w Constraints: range: 0-256	.1.3.6.1.4.1.89.68.6.4.1.8
rlBcmAclSrcIp Indicate the srcIp to compare.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.89.68.6.4.1.9
rlBcmAclSrcIpMask Indicates the number of most significant bits of the Ip Address that are used in specifying IP source addresses in classifiers. Value 0.0.0.0 means Any source IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.89.68.6.4.1.10
rlBcmAclDstIp Indicate the DstIp to compare.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.89.68.6.4.1.11
rlBcmAclDstIpMask Indicates the number of most significant bits of the Ip Address that are used in specifying IP destination addresses in classifiers. Value 0.0.0.0 means Any destination IP address.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.89.68.6.4.1.12
rlBcmAclSrcL4Port Indicate the Src port to compare. Value 65536 means Any source port.	Integer32r/w Constraints: range: 0-65536	.1.3.6.1.4.1.89.68.6.4.1.13
rlBcmAclDstL4Port Indicate the destination port to compare. Value 65536 means Any destination port.	Integer32r/w Constraints: range: 0-65536	.1.3.6.1.4.1.89.68.6.4.1.14
rlBcmAclTCPbits Indicate 6-bits TCP code bits to compare.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.89.68.6.4.1.15
rlBcmAclTCPbitsMask Indicate 6-bits mask for TCP code bits to compare. Value 0 means Any TCP code bits.	Integer32r/w Constraints: range: 0-63	.1.3.6.1.4.1.89.68.6.4.1.16
rlBcmAclStatus The status of the table entry. It's used to delete an entry. Only three statuses are aceptable: CreateAndGo to create, Active to update,Destroy to delete. All other values cause error.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.68.6.4.1.17

This table defines ports on which ACLs are applied.

rlBcmACLPortsEntry row .1.3.6.1.4.1.89.68.6.5.1

The row definition for this table.

Indexes

rlBcmAclPortsIfIndex rlBcmAclPortsDirection

Column	Syntax	OID
rlBcmAclPortsIfIndex The ifIndex of port or trunk on which ACL is applyed.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.6.5.1.1
rlBcmAclPortsDirection The direction of ACL applying.	Enumerationr/w Enumerated Values: 1 ingress 2 egress 3 both	.1.3.6.1.4.1.89.68.6.5.1.2
rlBcmAclPortsAclID The ID of ACL.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.89.68.6.5.1.3
rlBcmAclPortsStatus The status of the table entry. It's used to delete an entry. Only three statuses are aceptable: CreateAndGo to create, Active to update,Destroy to delete. All other values cause error.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.89.68.6.5.1.4