vrrpCurCfgVirtRtrPriority
BLADETYPE6-NETWORK-MIB ·
.1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.6
Object
column
Integer32
The priority value to be used by the specified VRRP virtual routers.
Context
- MIB
- BLADETYPE6-NETWORK-MIB
- OID
.1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.6- Type
- column
- Access
- readonly
- Status
- current
- Parent
- vrrpCurCfgVirtRtrTableEntry
- Table
- vrrpCurCfgVirtRtrTable
- Siblings
- 10
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-254
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| vrrpCurCfgVirtRtrIndx The VRRP virtual router table index. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.1 |
| vrrpCurCfgVirtRtrTckVirtRtr Enable or disable tracking other virtual routers for priority
adjustment. The priority increment is defined
in vrrpCurCfgGenTckVirtRtrInc. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.10 |
| vrrpCurCfgVirtRtrTckIpIntf Enable or disable tracking other router interfaces for
priority adjustment. The priority increment is defined
in vrrpCurCfgGenTckIpIntfInc. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.11 |
| vrrpCurCfgVirtRtrTckVlanPort Enable or disable tracking port state of VLAN ports
for priority adjustment. The priority increment is
defined in vrrpCurCfgGenTckVlanPortInc. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.12 |
| vrrpCurCfgVirtRtrID The VRRP virtual router identifier. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.2 |
| vrrpCurCfgVirtRtrAddr The VRRP virtual router IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.3 |
| vrrpCurCfgVirtRtrIfIndex The IfIndex that the VRRP virtual router is representing. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.4 |
| vrrpCurCfgVirtRtrInterval The time interval between VRRP advertisements in seconds. | column | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.5 |
| vrrpCurCfgVirtRtrPreempt This is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.
enabled(1) - allow preemption
disabled(2) - prohibit p… | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.7 |
| vrrpCurCfgVirtRtrState Enable or disable the VRRP virtual router. | column | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.6.2.3.1.6.3.1.8 |