BLADETYPE6-NETWORK-MIB Table View

The table of port configuration in the current_configuration block.

agPortCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1

A row in the port table in the current_configuration block.

Indexes

No indexes recorded

Column	Syntax	OID
agPortCurCfgIndx The index of the row in port configurations table.	SNMPv2-SMIInteger32 Constraints: range: 0-262143	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.1
agPortCurCfgState This is the state of the port.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.2
agPortCurCfgVlanTag This is VLAN tag state of the port	Enumeration Constraints: range: 0-262143	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.3
agPortCurCfgRmon This object is used to turn RMON on or off on the port.	Enumeration Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.5
agPortCurCfgPVID The default VLAN ID for the port.	Integer32 Constraints: range: 0-262143	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.6
agPortCurCfgGigEthAutoNeg This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.	Enumeration Constraints: range: 0-65	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.11
agPortCurCfgGigEthSpeed Selects the port speed for gigabit Ethernet connection.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.12
agPortCurCfgGigEthMode This object is used to select port mode for gigabit Ethernet connection.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.13
agPortCurCfgGigEthFctl This object is used to select port flow control for gigabit Ethernet connection.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.14
agPortCurCfgPortName The switch port name.	OctetString Enumerated Values: 2 enabled 3 disabled	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.15
agPortCurCfgLinkTrap Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface…	Enumeration Enumerated Values: 2 tagged 3 untagged	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.18
agPortCurCfgTagPVID This is PVID tag state of the port	Enumeration Enumerated Values: 2 on 3 off	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.19
agPortCurCfgMulticastThreshold Current status of the port's Multicast Threshold.	Enumeration Constraints: range: 1-4095	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.20
agPortCurCfgMulticastThresholdRate Current port's Multicast Threshold Rate.	Integer32 Enumerated Values: 2 on 3 off	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.21
agPortCurCfgBroadcastThreshold Current status of the port's Broadcast Threshold.	Enumeration Enumerated Values: 2 mbs10 3 mbs100 4 any 5 mbs1000 6 mbs10000	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.22
agPortCurCfgBroadcastThresholdRate Current port's Broadcast Threshold Rate.	Integer32 Enumerated Values: 2 full-duplex 3 half-duplex 4 full-or-half-duplex	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.23
agPortCurCfgDLFThreshold Current status of the port's Destination Lookup Fail Threshold.	Enumeration Enumerated Values: 2 transmit 3 receive 4 both 5 none	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.24
agPortCurCfgDLFThresholdRate Current port's Destination Lookup Fail Threshold Rate.	Integer32 Constraints: range: 0-65	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.25
agPortCurCfgType The switch port type.	OctetString Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.2.1.28

The table of port configuration in the new_configuration block.

agPortNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1

A row in the port configuration table in the new_configuration block.

Indexes

No indexes recorded

Column	Syntax	OID
agPortNewCfgIndx The index of the row in port configurations table.	SNMPv2-SMIInteger32 Constraints: range: 0-262143	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.1
agPortNewCfgState This is the state of the port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.2
agPortNewCfgVlanTag This is VLAN tag state of the port	Enumerationr/w Constraints: range: 0-262143	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.3
agPortNewCfgRmon This object is used to turn RMON on or off on the port.	Enumerationr/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.5
agPortNewCfgPVID The default VLAN ID for the port.	Integer32r/w Constraints: range: 0-262143	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.6
agPortNewCfgGigEthAutoNeg This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.	Enumerationr/w Constraints: range: 0-65	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.11
agPortNewCfgGigEthSpeed Selects the port speed for gigabit Ethernet connection.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.12
agPortNewCfgGigEthMode This object is used to select port mode for gigabit Ethernet connection.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.13
agPortNewCfgGigEthFctl This object is used to select port flow control for gigabit Ethernet connection.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.14
agPortNewCfgPortName The switch port name.	OctetStringr/w Constraints: range: 0-128	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.15
agPortNewCfgLinkTrap Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface…	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.18
agPortNewCfgTagPVID This is PVID tag state of the port	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.19
agPortNewCfgMulticastThreshold New status of the port's Multicast Threshold.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.20
agPortNewCfgMulticastThresholdRate New port's Multicast Threshold Rate.	Integer32r/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.21
agPortNewCfgBroadcastThreshold New status of the port's Broadcast Threshold.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.22
agPortNewCfgBroadcastThresholdRate New port's Broadcast Threshold Rate.	Integer32r/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.23
agPortNewCfgDLFThreshold New status of the port's Destination Lookup Fail Threshold.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.24
agPortNewCfgDLFThresholdRate New port's Destination Lookup Fail Threshold Rate.	Integer32r/w Enumerated Values: 0 none 1 user 2 oper 3 admin	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.25
agPortNewCfgType The switch port type.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.2.3.1.28

The table of syslog messages.

agSyslogMsgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.11.1

A syslog message stored on the switch.

Indexes

No indexes recorded

Column	Syntax	OID
agSyslogMsgIndex The syslog message table index.	SNMPv2-SMIInteger32 Enumerated Values: 0 none 1 user 2 oper 3 admin Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.11.1.1
agSyslogMessage The syslog message.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.5.11.1.2

The table of URL path for URL load balancing in the current_config.

agApplyTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.8.5.1

Information about an URL path for URL load balancing.

Indexes

No indexes recorded

Column	Syntax	OID
agApplyIndex The table index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.8.5.1.1
agApplyString A string in the apply table.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.8.5.1.2

The table of tacacs+ user map current configuration.

agTacacsUserMapCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.31.1

A row in the tacacs+ user mapping table.

Indexes

agNewCfgMgmtNetIndex

Column	Syntax	OID
agTacacsUserMapCurCfgUId The current config remote privilege identifier.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.31.1.1
agTacacsUserMapCurCfgMapping Current Tacacs+ user privilege mappings.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.31.1.2

The table of tacacs+ user map new configuration.

agTacacsUserMapNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.32.1

A row in the tacacs+ user mapping table.

Indexes

No indexes recorded

Column	Syntax	OID
agTacacsUserMapNewCfgUId The new config remote privilege identifier.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.32.1.1
agTacacsUserMapNewCfgMapping Set new Tacacs+ user privilege mappings.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.10.32.1.2

The table for Management Network definitions
in the current configuration block.

agCurCfgMgmtNetEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.2.1

A row in the management network definition table.

Indexes

No indexes recorded

Column	Syntax	OID
agCurCfgMgmtNetIndex The index of the Management Network Definition table.	SNMPv2-SMIInteger32 Constraints: range: 0-8	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.2.1.1
agCurCfgMgmtNetSubnet The Management Network Address in the current_configuration block.	SNMPv2-SMIIpAddress Constraints: range: 0-128	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.2.1.2
agCurCfgMgmtNetMask The Management Network Mask in the current_configuration block.	SNMPv2-SMIIpAddress Enumerated Values: 2 enabled 3 disabled Type Constraints: range: 4	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.2.1.3

The table for Management Network definitions
in the new configuration block.

agNewCfgMgmtNetEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.3.1

A row in the management network definition table.

Indexes

agAccessUserNewCfgUId

Column	Syntax	OID
agNewCfgMgmtNetIndex The index of the Management Network Definition table.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.3.1.1
agNewCfgMgmtNetSubnet The Management Network Address in the new_configuration block.	SNMPv2-SMIIpAddressr/w Enumerated Values: 0 user 3 oper 6 admin Type Constraints: range: 4	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.3.1.2
agNewCfgMgmtNetMask The Management Network Mask in the new_configuration block.	SNMPv2-SMIIpAddressr/w Constraints: range: 0-8	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.3.1.3
agNewCfgMgmtNetDelete By setting the value to delete(2), the entire row is deleted.	Enumerationr/w Constraints: range: 0-128	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.11.3.1.4

The table of Access user configuration.

agAccessUserCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.2.1

A row in the Access user configuration table.

Indexes

No indexes recorded

Column	Syntax	OID
agAccessUserCurCfgUId The User identifier.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.2.1.1
agAccessUserCurCos The user class of service.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.2.1.2
agAccessUserCurCfgName The user name.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.2.1.3
agAccessUserCurCfgPswd The character string representing the user passworde.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.2.1.4
agAccessUserCurCfgState Enable or disable a user.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.2.1.5

The table of Access user configuration.

agAccessUserNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.3.1

A row in the Access user configuration table.

Indexes

No indexes recorded

Column	Syntax	OID
agAccessUserNewCfgUId The User identifier.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.3.1.1
agAccessUserNewCos The user class of service.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.3.1.2
agAccessUserNewCfgName The user name.	OctetStringr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.3.1.3
agAccessUserNewCfgPswd The character string representing the user passworde.	OctetStringr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.3.1.4
agAccessUserNewCfgState Enable or disable a user.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.3.1.5
agAccessUserNewCfgDelete This is an action object to create or delete a User. other(1) is returned always when read. The following values are writable: delete(2)...to delete a User	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.1.12.3.1.6

The table of port statistics.

portStatsTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1

A row in the port stats table.

Indexes

No indexes recorded

Column	Syntax	OID
portStatsIndx The port index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.1
portStatsPhyIfInOctets The total number of octets received on the interface, including framing characters.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.2
portStatsPhyIfInUcastPkts The number of subnetwork-unicast packets delivered to a higher-layer protocol.	SNMPv2-SMICounter32 Enumerated Values: 1 clear 2 ok Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.3
portStatsPhyIfInNUcastPkts The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.4
portStatsPhyIfInDiscards The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet co…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.5
portStatsPhyIfInErrors The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.6
portStatsPhyIfInUnknownProtos The number of packets received via the interface which were discarded because of an unknown or unsupported protocol.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.7
portStatsPhyIfOutOctets The total number of octets transmitted out of the interface, including framing characters.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.8
portStatsPhyIfOutUcastPkts The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.9
portStatsPhyIfOutNUcastPkts The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.10
portStatsPhyIfOutDiscards The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer s…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.11
portStatsPhyIfOutErrors The number of outbound packets that could not be transmitted because of errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.12
portStatsPhyIfOutQLen The length of the output packet queue (in packets).	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.13
portStatsPhyIfInBroadcastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.14
portStatsPhyIfOutBroadcastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.15
portStatsClear Setting this value to clear(1) clears the stats for this port.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.16
portStatsPhyIfInMulticastPkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.17
portStatsPhyIfOutMulticastPkts The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.1.1.18

The table of 802.1x port statistics.

dot1xPortStatsTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1

A row in the 802.1x port stats table.

Indexes

No indexes recorded

Column	Syntax	OID
dot1xPortStatsIndx The 802.1x port stats index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.1
eapolFramesRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.2
eapolFramesTx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.3
eapolStartFramesRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.4
eapolLogoffFramesRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.5
eapolRespIdFramesRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.6
eapolRespFramesRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.7
eapolReqIdFramesTx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.8
eapolReqFramesTx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.9
invalidEapolFramesRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.10
eapLengthErrorFramesRx	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.11
authEntersConnecting	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.12
authEapLogoffsWhileConnecting	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.13
authEntersAuthenticating	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.14
authSuccessesWhileAuthenticating	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.15
authTimeoutsWhileAuthenticating	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.16
authFailWhileAuthenticating	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.17
authReauthsWhileAuthenticating	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.18
authEapStartsWhileAuthenticating	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.19
authEapLogoffWhileAuthenticating	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.20
authReauthsWhileAuthenticated	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.21
authEapStartsWhileAuthenticated	SNMPv2-SMIInteger32 Constraints: range: 0-5	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.22
authEapLogoffWhileAuthenticated	SNMPv2-SMIInteger32 Enumerated Values: 2 mbs10 3 mbs100 4 mbs1000 5 any 6 mbs10000 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.23
backendResponses	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.24
backendAccessChallenges	SNMPv2-SMIInteger32 Enumerated Values: 1 up 2 down 3 testing Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.25
backendOtherRequestsToSupplicant	SNMPv2-SMIInteger32 Enumerated Values: 1 up 2 down 3 testing Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.26
backendNonNakResponsesFromSupplicant	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.27
backendAuthSuccesses	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.28
backendAuthFails	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.29
lastEapolFrameVersion	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.30
lastEapolFrameSource	SNMPv2-TCMacAddress Constraints: range: 0-20 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.2.1.31

The table of all ports statistics.

allportsStatsTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1

A row in the table of all ports statistics.

Indexes

No indexes recorded

Column	Syntax	OID
allportsStatsIndx The port number.	SNMPv2-SMIInteger32 Constraints: range: 0-20	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.1
allportsStatsDescr The port description.	OctetString Constraints: range: 0-20	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.2
allportsStatsSpeed The current operational speed of the port.	Enumeration Constraints: range: 0-20	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.3
allportsStatsPhysAddress The port MAC Address.	SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.4
allportsStatsAdminStatus The port Admin state.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.5
allportsStatsOperStatus The port Operational Status.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.6
allportsStatsInOctets Octets In for port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.7
allportsStatsOutOctets Octets Out for port.	SNMPv2-SMICounter32 Constraints: range: 0-20	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.8
allportsStatsInPkts Packets In for port.	SNMPv2-SMICounter32 Constraints: range: 0-20	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.9
allportsStatsOutPkts Packets Out for port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.10
allportsStatsInUcast Unicast Packets In for port.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.11
allportsStatsOutUcast Unicast Packets Out for port.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.12
allportsStatsInBcast Broadcasts Packets In for port.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.13
allportsStatsOutBcast Broadcasts Packets Out for port.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.14
allportsStatsInMcast Multicast Packets In for port.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.15
allportsStatsOutMcast Multicast Packets Out for port.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.16
allportsStatsInDiscards Discarded Packets for port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.17
allportsStatsOutDiscards Outbound Packets for port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.18
allportsStatsInErrors Error Packets for port.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.19
allportsStatsOutErrors Not sent packets due to error.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.20
allportsStatsInUnknownProtos Unknown protocol packets.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.21
allportsStatsOutQLen Outbound Packet Queue Length.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.22
allportsStatsipInReceives Ip In Receives.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.23
allportsStatsipInHeaderErrors Ip In Header Errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.24
allportsStatsipInDiscards Ip In Discards.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.25
allportsStatsLinkStateChange Number of link state changes.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.3.3.1.26

The table of management port statistics.

portMgmtStatsTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1

A row in the management port stats table.

Indexes

No indexes recorded

Column	Syntax	OID
portMgmtStatsIndx The management port index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.1
portMgmtStatsRxpackets Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.2
portMgmtStatsRxErrors The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.3
portMgmtStatsRxDropped The number of inbound packets that were dropped.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.4
portMgmtStatsRxOverruns The number of data overruns over this link.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.5
portMgmtStatsRxFrame The number of frames received on this link.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.6
portMgmtStatsTxpackets Total number of packet allocations from the packet buffer pool by the TCP/IP protocol stack.	SNMPv2-SMICounter32 Enumerated Values: 1 ok 2 clear Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.7
portMgmtStatsTxErrors The number of outbound packets that contained errors preventing them from being deliverable to a higher-layer protocol.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.8
portMgmtStatsTxDropped The number of outbound packets that were dropped.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.9
portMgmtStatsTxOverruns The number of data overruns over this link.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.10
portMgmtStatsTxCarrier The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a this interface.	SNMPv2-SMICounter32 Enumerated Values: 2 mbs10 3 mbs100 4 mbs1000 5 any 6 mbs10000 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.11
portMgmtStatsTxCollisions The number of collisions on this outbound segment.	SNMPv2-SMICounter32 Enumerated Values: 2 full-duplex 3 half-duplex Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.12
portMgmtStatsRxBytes The total number of bytes received.	SNMPv2-SMICounter32 Enumerated Values: 2 transmit 3 receive 4 both 5 none Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.13
portMgmtStatsRxMulticast The total number of multicast packets received.	SNMPv2-SMICounter32 Enumerated Values: 1 up 2 down 3 disabled 4 inoperative Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.14
portMgmtStatsTxBytes The total number of bytes transmitted.	SNMPv2-SMICounter32 Constraints: range: 0-255	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.5.1.1.15

The table of ACL statistics.

aclStatsTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.12.1.1

Statistics about a particular ACL configuration entry.

Indexes

No indexes recorded

Column	Syntax	OID
aclStatsIndex The acl index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.12.1.1.1
aclStatsHits Total number of hits for this ACL entry	SNMPv2-SMICounter32 Enumerated Values: 1 up 2 down 3 testing Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.12.1.1.2
aclClearStats Setting this value to clear(2) clears the stats for the ACL.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.2.12.1.1.3

The table of port information.

portInfoTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1

A row in the port information table.

Indexes

agDiffIndex

Column	Syntax	OID
portInfoIndx The port index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.1
portInfoSpeed The current operational speed of the port.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.2
portInfoMode The current operational mode of the port.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.3
portInfoFlowCtrl The current operational flow control of the port.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.4
portInfoLink The current operational link status of the port.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.5
portInfoPhyIfDescr A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.6
portInfoPhyIfType The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.7
portInfoPhyIfMtu The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that …	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.8
portInfoPhyIfPhysAddress The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet str…	SNMPv2-TCPhysAddress Description: Represents media- or physical-level addresses.	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.9
portInfoPhyIfOperStatus The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.10
portInfoPhyIfLastChange The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object …	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.2.1.1.11

The table of URL path for URL load balancing in the current_config.

agDiffTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.4.4.1

Information about an URL path for URL load balancing.

Indexes

ufdInfoLtDAdminkey

Column	Syntax	OID
agDiffIndex The table index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.4.4.1.1
agDiffString A string in the diff table.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.4.4.1.2

The table of dump strings.

agCfgDumpTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.5.4.1

An entry in the dump table.

Indexes

No indexes recorded

Column	Syntax	OID
agCfgDumpIndex The table index.	SNMPv2-SMIInteger32 Constraints: range: 0-6	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.5.4.1.1
agCfgDumpString A string in the dump table.	OctetString Constraints: range: 0-6	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.5.4.1.2

The table of gea port mapping.

geaportInfoTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.7.1.1

An entry in the geaport table mapping.

Indexes

No indexes recorded

Column	Syntax	OID
geaportInfoLogicalIndex The logical port index.	SNMPv2-SMIInteger32 Enumerated Values: 1 notInstalled 2 fault 3 none 4 notAvailable Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.7.1.1.1
geaportInfoPort The GEA Port (0-based).	SNMPv2-SMIInteger32 Enumerated Values: 1 notInstalled 2 notXFP 3 notSFP 4 yes Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.7.1.1.2
geaportInfoUnit The GEA Unit.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.7.1.1.3

The table of LtD admin key configuration.

ufdInfoLtDAdminkeyTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.8.10.1

A row in the LtD admin key table.

Indexes

No indexes recorded

Column	Syntax	OID
ufdInfoLtDAdminkey The LtD admin key.	SNMPv2-SMIInteger32 Enumerated Values: 1 enabled 2 disabled Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.8.10.1.1

The table of external port SFP information.

sfpInfoTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.9.1.1

A row in the external port SFP information table.

Indexes

No indexes recorded

Column	Syntax	OID
sfpInfoIndx The external port SFX index.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.9.1.1.1
sfpInfoPort External Port SFP/XFP alias.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.9.1.1.2
sfpInfoDevice External Port SFP/XFP Device.	OctetString Enumerated Values: 1 no 2 yes	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.9.1.1.3
sfpInfoTXEnable External Port SFP/XFP TX-Enable.	Enumeration Enumerated Values: 1 no 2 yes	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.9.1.1.4
sfpInfoRXSignal External Port SFP/XFP RX-Signal.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.9.1.1.5
sfpInfoTXFault External Port SFP/XFP TX-Fault.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.9.1.1.6
sfpInfoApproved External Port SFP/XFP Approval.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.3.9.1.1.7

The table of port operations.

agPortOperTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.1.1

A row in the port operations table.

Indexes

No indexes recorded

Column	Syntax	OID
portOperIdx The port index.	SNMPv2-SMIInteger32 Enumerated Values: 2 enabled 3 disabled Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.1.1.1
portOperState Enable/Disable port.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.1.1.2
portOperRmon Enable/Disable RMON for port.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.1.1.3

The table of port operations.

portOperDot1xTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.3.1

A row in the port 802.1x operation table.

Indexes

No indexes recorded

Column	Syntax	OID
portOperDot1xIndx The port index.	SNMPv2-SMIInteger32 Constraints: range: 0-32	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.3.1.1
portOperDot1xReset Reinitialize 802.1x access control on port.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.3.1.2
portOperDot1xReauth Initiate reauthentication on port.	Enumerationr/w Enumerated Values: 2 enabled 3 disabled	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.1.4.3.1.3

The table of VLAN configuration.

vlanCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.2.1

A row in the VLAN configuration table.

Indexes

No indexes recorded

Column	Syntax	OID
vlanCurCfgVlanId The VLAN identifier.	SNMPv2-SMIInteger32 Enumerated Values: 1 other 2 delete Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.2.1.1
vlanCurCfgVlanName The VLAN name.	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.2.1.2
vlanCurCfgPorts The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ port 7 …	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.2.1.3
vlanCurCfgState Enable or disable a VLAN	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.2.1.4
vlanCurCfgStg The Spanning Tree Group for the VLAN.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.2.1.6

The table of VLAN configuration.

vlanNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3.1

A row in the VLAN configuration table.

Indexes

No indexes recorded

Column	Syntax	OID
vlanNewCfgVlanId The VLAN identifier.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3.1.1
vlanNewCfgVlanName The VLAN name.	OctetStringr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3.1.2
vlanNewCfgPorts The port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || || ||___ po…	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3.1.3
vlanNewCfgState Enable or disable a VLAN	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3.1.4
vlanNewCfgAddPort The port to be added to the specified VLAN. A '0' value is returned when read.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3.1.5
vlanNewCfgRemovePort The port to be removed from the specified VLAN. A '0' value is returned when read.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3.1.6
vlanNewCfgDelete This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN	Enumerationr/w Enumerated Values: 1 enable 2 disable	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3.1.7
vlanNewCfgStg The Spanning Tree Group for the VLAN.	SNMPv2-SMIInteger32r/w Enumerated Values: 1 other 2 delete Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.1.3.1.9

The table of trunk group configuration.

trunkGroupCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.2.1

A row in the trunk group configuration table.

Indexes

stgCurCfgIndex

Column	Syntax	OID
trunkGroupCurCfgIndex The identifier of the trunk group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.2.1.1
trunkGroupCurCfgPorts The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || ||…	OctetString Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.2.1.2
trunkGroupCurCfgState Enable or disable a trunk group.	Enumeration Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.2.1.3

The table of trunk group configuration.

trunkGroupNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.3.1

A row in the trunk group configuration table.

Indexes

No indexes recorded

Column	Syntax	OID
trunkGroupNewCfgIndex The identifier of the trunk group.	SNMPv2-SMIInteger32 Constraints: range: 6-40	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.3.1.1
trunkGroupNewCfgPorts The port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || ||…	OctetString Constraints: range: 0-512	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.3.1.2
trunkGroupNewCfgAddPort The port to be added in the trunk group. When read, 0 is returned.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.3.1.3
trunkGroupNewCfgRemovePort The port to be deleted from the trunk group. when read, 0 is returned.	SNMPv2-SMIInteger32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.3.1.4
trunkGroupNewCfgState Enable or disable a trunk group.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.3.1.5
trunkGroupNewCfgDelete Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.2.3.1.6

The table of Spanning Tree Group configuration.

stgCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.1.1

Information about a particular Spanning Tree Group configuration.

Indexes

No indexes recorded

Column	Syntax	OID
stgCurCfgIndex The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.1.1.1
stgCurCfgState Turn on of off Spanning Tree operation of a particular Spanning Tree Group.	Enumeration Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.1.1.2
stgCurCfgPriority The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.1.1.5
stgCurCfgBrgHelloTime The value in seconds that all bridges use for HelloTime when this bridge is acting as the root.	Integer32 Constraints: range: 4-30	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.1.1.6
stgCurCfgBrgForwardDelay The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.	Integer32 Constraints: range: 6-40	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.1.1.7
stgCurCfgBrgMaxAge The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.	Integer32 Constraints: range: 0-512	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.1.1.8
stgCurCfgVlanBmap The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4095. in receiving order: OCTET 1 OCTET 2 .....…	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.1.1.10

The table of Spanning Tree Groups configuration in the new_config.

stgNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1

Information about a particular Spanning Tree Group configuration.

Indexes

No indexes recorded

Column	Syntax	OID
stgNewCfgIndex The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.1
stgNewCfgState Turn on of off Spanning Tree operation of a particular Spanning Tree Group.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.2
stgNewCfgDefaultCfg Setting the value to default-config(1) will set the default configuration as recommended by IEEE 802.1D for a particular Spanning Tree Group. default-config (1) is always returned When read, but it does not mean anyt…	Enumerationr/w Constraints: range: 0-255	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.3
stgNewCfgAddVlan The vlan to be added to the specified Spanning Tree Group. A '0' value is returned when read.	SNMPv2-SMIInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.4
stgNewCfgRemoveVlan The vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read.	SNMPv2-SMIInteger32r/w Enumerated Values: 1 auto 2 p2p 3 shared Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.5
stgNewCfgPriority The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.	Integer32r/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.8
stgNewCfgBrgHelloTime The value in seconds that all bridges use for HelloTime when this bridge is acting as the root.	Integer32r/w Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.9
stgNewCfgBrgForwardDelay The value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.	Integer32r/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.10
stgNewCfgBrgMaxAge The value in seconds that all bridges use for MaxAge when this bridge is acting as the root.	Integer32r/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.11
stgNewCfgVlanBmap The vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4095. in receiving order: OCTET 1 OCTET 2 .....…	OctetString	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.2.1.13

The table of Spanning Tree Group port configuration in the
current_config.

stgCurCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3.1

Information about port configuration of a particular Spanning Tree
Group.

Indexes

No indexes recorded

Column	Syntax	OID
stgCurCfgStgIndex The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.	SNMPv2-SMIInteger32 Constraints: range: 0-255	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3.1.1
stgCurCfgPortIndex The port identifier of a particular Spanning Tree Group.	SNMPv2-SMIInteger32 Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3.1.2
stgCurCfgPortState Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.	Enumeration Enumerated Values: 1 auto 2 p2p 3 shared	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3.1.3
stgCurCfgPortPriority The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.	Integer32 Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3.1.4
stgCurCfgPortPathCost The contribution of this port to the path cost of paths towards the spanning tree root which include this port.	Integer32 Enumerated Values: 1 enabled 2 disabled	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3.1.5
stgCurCfgPortLink The type of the port link.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3.1.6
stgCurCfgPortEdge The state of port edge.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3.1.7
stgCurCfgPortFastFwd The state of port fast forwarding.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.3.1.8

The table of Spanning Tree Group port configuration in the
new_config.

stgNewCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4.1

Information about port configuration of a particular Spanning Tree
Group.

Indexes

No indexes recorded

Column	Syntax	OID
stgNewCfgStgIndex The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4.1.1
stgNewCfgPortIndex The port identifier of a particular Spanning Tree Group.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4.1.2
stgNewCfgPortState Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4.1.3
stgNewCfgPortPriority The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.	Integer32r/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4.1.4
stgNewCfgPortPathCost The contribution of this port to the path cost of paths towards the spanning tree root which include this port.	Integer32r/w Enumerated Values: 1 in 2 out 3 both	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4.1.5
stgNewCfgPortLink The type of the port link.	Enumerationr/w Enumerated Values: 1 other 2 delete	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4.1.6
stgNewCfgPortEdge The state of port edge.	Enumerationr/w Enumerated Values: 1 other 2 delete	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4.1.7
stgNewCfgPortFastFwd The state of port fast forwarding.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.3.4.1.8

The table of monitoring ports.

pmCurCfgPortMonitorEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.3.1

A row in the monitoring port table.

Indexes

No indexes recorded

Column	Syntax	OID
pmCurCfgPmirrMoniPortIndex The monitoring port number.	SNMPv2-SMIInteger32 Constraints: range: 0-240	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.3.1.1
pmCurCfgPmirrMirrPortIndex The mirrored port number	SNMPv2-SMIInteger32 Constraints: range: 0-200000000	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.3.1.2
pmCurCfgPmirrDirection The type of traffic to be monitored with respect to the mirrored port.	Enumeration Enumerated Values: 1 auto 2 p2p 3 shared	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.3.1.3

The table of monitoring ports.

pmNewCfgPortMonitorEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.4.1

A row in the monitoring port table.

Indexes

No indexes recorded

Column	Syntax	OID
pmNewCfgPmirrMoniPortIndex The monitoring port number.	SNMPv2-SMIInteger32 Constraints: range: 1-10	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.4.1.1
pmNewCfgPmirrMirrPortIndex The mirrored port number	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.4.1.2
pmNewCfgPmirrDirection The type of traffic to be monitored with respect to the mirrored port.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.4.1.3
pmNewCfgPmirrDelete Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.	Enumerationr/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.4.1.4
pmNewCfgPmonDelete Setting the value to delete(2) will delete the monitor port. When read, other(1) is returned.	Enumerationr/w Constraints: range: 0-240	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.4.1.4.1.10

The table of CIST Port configuration.

mstCistCurCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.3.1

Information about a particular CIST Port configuration.

Indexes

No indexes recorded

Column	Syntax	OID
mstCistCurCfgPortIndex The port number of the port for which this entry contains spanning tree configuration.	SNMPv2-SMIInteger32 Enumerated Values: 1 enabled 2 disabled Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.3.1.1
mstCistCurCfgPortPriority The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.	Integer32 Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.3.1.2
mstCistCurCfgPortPathCost The contribution of this port to the path cost of paths towards the CIST Root which include this port.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.3.1.3
mstCistCurCfgPortLinkType The administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shar…	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.3.1.4
mstCistCurCfgPortEdge The value of the Edge Port parameter.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.3.1.5
mstCistCurCfgPortStpState Turn port's Spanning Tree on/off.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.3.1.6
mstCistCurCfgPortHelloTime The amount of time between the transmission of Configuration Port PDUs in seconds.	Integer32 Enumerated Values: 1 off 2 active 3 passive	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.3.1.7

The table of CIST Port configuration.

mstCistNewCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.4.1

Information about a particular CIST Port configuration.

Indexes

No indexes recorded

Column	Syntax	OID
mstCistNewCfgPortIndex The port number of the port for which this entry contains spanning tree configuration.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.4.1.1
mstCistNewCfgPortPriority The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.	Integer32r/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.4.1.2
mstCistNewCfgPortPathCost The contribution of this port to the path cost of paths towards the CIST Root which include this port.	Integer32r/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.4.1.3
mstCistNewCfgPortLinkType The administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of shar…	Enumerationr/w Enumerated Values: 1 off 2 active 3 passive	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.4.1.4
mstCistNewCfgPortEdge The value of the Edge Port parameter.	Enumerationr/w Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.4.1.5
mstCistNewCfgPortStpState Turn port's Spanning Tree on/off.	Enumerationr/w Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.4.1.6
mstCistNewCfgPortHelloTime The amount of time between the transmission of Configuration Port PDUs in seconds.	Integer32r/w	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.5.2.4.1.7

The table of LACP port configuration.

lacpCurPortCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.7.1

A row in the LACP port configuration table.

Indexes

No indexes recorded

Column	Syntax	OID
lacpCurPortCfgTableId LACP port number.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.7.1.1
lacpCurPortState LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.	Enumeration	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.7.1.2
lacpCurPortActorPortPriority The priority value assigned to this Aggregation Port. This 16-bit value is read-only.	Integer32	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.7.1.3
lacpCurPortActorAdminKey The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.	Integer32	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.7.1.4

The table of LACP port configuration.

lacpNewPortCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.8.1

A row in the LACP port configuration table.

Indexes

No indexes recorded

Column	Syntax	OID
lacpNewPortCfgTableId LACP port number.	SNMPv2-SMIInteger32 Enumerated Values: 0 forceUnauth 1 auto 2 forceAuth Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.8.1.1
lacpNewPortState LACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but responds to peer.	Enumerationr/w Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.8.1.2
lacpNewPortActorPortPriority The priority value assigned to this Aggregation Port. This 16-bit value is read-write.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.8.1.3
lacpNewPortActorAdminKey The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance.	Integer32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.6.8.1.4

The table of LtD admin key configuration.

ufdLtDAdminkeyCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.14.1

A row in the LtD admin key table.

Indexes

No indexes recorded

Column	Syntax	OID
ufdLtDAdminkeyCurCfg The LtD admin key.	SNMPv2-SMIInteger32 Constraints: range: 0-604800	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.14.1.1

The table of LtD admin key configuration.

ufdLtDAdminkeyNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.15.1

A row in the LtD admin key table.

Indexes

No indexes recorded

Column	Syntax	OID
ufdLtDAdminkeyNewCfg The LtD admin key.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.9.1.15.1.1

The table of 8021x configuration in the Current_config.

dot1xCurCfgPortEntry row .1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1

Information about 8021x Port Config

Indexes

No indexes recorded

Column	Syntax	OID
dot1xCurCfgPortIndex The 8021x Port number for which the table is related.	SNMPv2-SMIInteger32 Constraints: range: 0-65535	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1.1
dot1xCurCfgPortMode Port authenticaton mode forceUnauth(0), auto(1), forceAuth(2)	Enumeration Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1.2
dot1xCurCfgPortQtPeriod Quiet period (0-65535)	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1.3
dot1xCurCfgPortTxPeriod Tx Period	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1.4
dot1xCurCfgPortSupTmout Supplicant timeout (1..65535)	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1.5
dot1xCurCfgPortSrvTmout Server timeout (1..65535)	Integer32 Constraints: range: 1-604800	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1.6
dot1xCurCfgPortMaxRq Maximum numer of requests (1..10)	Integer32 Enumerated Values: 0 off 1 on	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1.7
dot1xCurCfgPortRaPeriod Reautentication period (0..604800)	Integer32 Enumerated Values: 0 other 1 apply	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1.8
dot1xCurCfgPortReAuth ReAuthentication state off(0), on(1)	Enumeration Enumerated Values: 0 other 1 apply	.1.3.6.1.4.1.11.2.3.7.11.33.6.2.2.1.11.3.1.9