agCurBootNxtCliMode
BLADETYPE4-NETWORK-MIB ·
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.66
Object
scalar
Enumeration
Current boot mode.
Context
- MIB
- BLADETYPE4-NETWORK-MIB
- OID
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.66- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- agSystem
- Siblings
- 68
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | bladeos-cli |
2 | iscli |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| agSoftwareVersion The version of the software image that is currently running on the
system in the form of 'major.minor.maintenance.bugfix'. A zero
length string is returned if version is not av… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.10 |
| agCurCfgResetControl Current reset control state. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.102 |
| agNewCfgResetControl Enable/disable reset control after panic. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.103 |
| agBootVer The version of the boot code in the form of 'major.minor.bugfix'.
A zero length string is returned if version is not available. | scalar | OctetString | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.11 |
| agImage1Ver The version of the software image stored in image 1 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no val… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.12 |
| agImage2Ver The version of the software image stored in image 2 storage in the
form of 'major.minor.bugfix'. A zero length string is returned if
version is not available or there is no val… | scalar | OctetString | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.13 |
| agRtcDate The date on the real time clock in the form of 'mm/dd/yy'.
A zero length string is returned if date is not available. | scalar | OctetString | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.14 |
| agRtcTime The time on the real time clock in the form of 'hh:mm:ss'.
A zero length string is returned if time is not available. | scalar | OctetString | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.15 |
| agLastSetErrorReason The error reason of the last SET failure. | scalar | OctetString | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.16 |
| agCurCfgHttpServerPort The TCP port number that the HTTP server is listening to
in the current_configuration block. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.17 |
| agNewCfgHttpServerPort The TCP port number that the HTTP server is listening to
in the new_configuration block. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.18 |
| agCurCfgLoginBanner The user defined login banner. | scalar | OctetString | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.19 |
| agApplyConfiguration This is an action object to apply the changes made to configuration
of the switch. By setting the value to apply(2), all the changes
made since the last apply are written to the… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.2 |
| agNewCfgLoginBanner The user defined login banner. | scalar | OctetString | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.20 |
| agCurCfgConsole Enable or disable console output of syslog messages. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.23 |
| agNewCfgConsole Enable or disable console output of syslog messages. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.24 |
| agCurCfgBootp Enable or disable the use of BootP, as currently configured in the
current_configuration block. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.29 |
| agSavePending This object, when read, gives the user information
whether an save action is needed and that the configuration
has been applied but not saved to the flash. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.3 |
| agNewCfgBootp Enable or disable the use of BootP, in the new_configuration block. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.30 |
| agSlotNumber Identifies the slot in which this switch is installed. If the
agent implementing this MIB is not a blade in a chassis this
value has no meaning. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.31 |
| agCurCfgSnmpTimeout Once SNMP operations like agApplyConfig, agDiffState and
agDumpState, which use the state machine are done the resources
used by these operations need to be freed by setting the… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.32 |
| agNewCfgSnmpTimeout Once SNMP operations like agApplyConfig, agDiffState and
agDumpState, which use the state machine are done the resources
used by these operations need to be freed by setting the… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.33 |
| agCurCfgTelnetServerPort The TCP port number that the telnet server listens for telnet
sessions. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.34 |
| agNewCfgTelnetServerPort The TCP port number that the telnet server listens for telnet
sessions. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.35 |
| agClearFlashDump This is an action object to clear the FLASH dump.
ok(1) is returned when this object is read. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.36 |
| agRackId The rack unique identifier. | scalar | OctetString | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.37 |
| agChassis Chassis serial number. | scalar | OctetString | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.38 |
| agCurCfgTftpServerPort The TCP port number that the TFTP server is listening to
in the current_configuration block. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.39 |
| agSaveConfiguration This is an action object to write current configuration to
nonvolatile storage.
When issued with the saveActive, the active configuration
in flash is saved to backup i… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.4 |
| agNewCfgTftpServerPort The TCP port number that the TFTP server is listening to
in the new_configuration block. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.40 |
| agCurCfgTrapSrcIf The SNMP trap source interface number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.41 |
| agNewCfgTrapSrcIf The SNMP trap source interface number. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.42 |
| agCurCfgHttpsServerPort The TCP port number that the HTTPS server is listening to
in the current_configuration block. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.49 |
| agRevert This is an action object to revert the unapplied changes
made to the switch. By setting the value to revert(2),
all the unapplied changes will be reverted. This action
will cop… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.5 |
| agNewCfgHttpsServerPort The TCP port number that the HTTPS server is listening to
in the new_configuration block. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.50 |
| agCurDaylightSavings The daylight savings location.
Note: Locations are alphabetically ordered and
the corresponding code is not reflected in CLI. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.51 |
| agNewDaylightSavings The daylight savings location.
Note: Locations are alphabetically ordered and
the corresponding code is not reflected in CLI. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.52 |
| agCurCfgSysDlight Current daylight savings time status. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.53 |
| agNewCfgSysDlight Enable/disable daylight savings time. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.54 |
| agCurCfgIdleCLITimeout Set idle CLI sessions timeout. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.55 |
| agNewCfgIdleCLITimeout Set idle CLI sessions timeout. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.56 |
| agCurCfgUfdTrap The current status of the UFDFO SNMP trap. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.57 |
| agNewCfgUfdTrap Enable or disable sending UFDFO SNMP trap. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.58 |
| agCurCfgReminders Current status of reminders feature. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.59 |
| agRevertApply This is an action object to revert the unsaved changes
made to the switch. By setting the value to revertApply(2),
all the unsaved as well as unapplied changes will be
reverted… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.6 |
| agNewCfgReminders Enable or disable reminders feature. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.60 |
| agNewBootNxtCliMode Next cli boot mode. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.67 |
| agReset This is an action object to reboot the switch.
other(1) is returned always when read.
The following values are writable:
coldReset(2)...
warmReset(3)... | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.7 |
| agCurCfgDhcp Enable or disable the use of DHCP, as currently configured in the
current_configuration block. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.70 |
| agNewCfgDhcp Enable or disable the use of DHCP, in the new_configuration block. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.71 |
| agCfgL3Status The current status of L3 feature. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.72 |
| agCurCfgHprompt Current status of hprompt. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.73 |
| agNewCfgHprompt New status of hpprompt. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.75 |
| agCurCfgLoginNotice The user defined login notice. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.76 |
| agNewCfgLoginNotice The user defined login notice. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.77 |
| agCurBootNxtCliModePrompt Current status of selectable CLI mode prompt. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.78 |
| agNewBootNxtCliModePrompt Next status of selectable CLI mode prompt. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.79 |
| agConfigForNxtReset The configuration information to be loaded from at next reset.
The following values are writable:
active(2)...active configuration block
backup(3)...backup conf… | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.8 |
| agCurCfgOldDst Enable or disable system DST for US. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.82 |
| agNewCfgOldDst Enable or disable system DST for US. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.83 |
| agImageForNxtReset The software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2 | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.9 |
| agHavePanicDump This object, when read, gives the user the information
whether a panic dump exist in flash. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.91 |
| agCurHttpAcces Current HTTP server access state. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.92 |
| agNewHttpAcces New HTTP server acces state. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.93 |
| agCurCfgHttpsServerAccess Current HTTPS server access state. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.94 |
| agNewCfgHttpsServerAccess Enable/disable HTTPS server access. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.95 |
| agCurCfgTelnetAccess Current telnet access state. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.96 |
| agNewCfgTelnetAccess Enable/disable telnet access. | scalar | Enumeration | .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.1.97 |