BLADETYPE4-NETWORK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
144
Rows
144
Columns
1,145
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2 · 1 row entry · 21 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk agPortCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::agPortCurCfgTable'
The table of port configuration in the current_configuration block.
agPortCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1
A row in the port table in the current_configuration block.
Column Syntax OID
agPortCurCfgIndxThe index of the row in port configurations table.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.1
agPortCurCfgStateThis is the state of the port.Enumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.2
agPortCurCfgVlanTagThis is VLAN tag state of the portEnumeration
Enumerated Values:
2tagged
3untagged
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.3
agPortCurCfgRmonThis object is used to turn RMON on or off on the port.Enumeration
Enumerated Values:
2on
3off
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.5
agPortCurCfgPVIDThe default VLAN ID for the port.Integer32
Constraints:
range: 1-4095
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.6
agPortCurCfgGigEthAutoNegThis object is used to turn the autonegotiation on or off
for gigabit Ethernet connection.
Enumeration
Enumerated Values:
2on
3off
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.11
agPortCurCfgGigEthSpeedSelects the port speed for gigabit Ethernet connection.Enumeration
Enumerated Values:
2mbs10
3mbs100
4any
5mbs1000
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.12
agPortCurCfgGigEthModeThis object is used to select port mode for gigabit Ethernet connection.Enumeration
Enumerated Values:
2full-duplex
3half-duplex
4any
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.13
agPortCurCfgGigEthFctlThis object is used to select port flow control for
gigabit Ethernet connection.
Enumeration
Enumerated Values:
2transmit
3receive
4both
5none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.14
agPortCurCfgPortNameThe switch port name.OctetString
Constraints:
range: 0-65
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.15
agPortCurCfgLinkTrapIndicates whether linkUp/linkDown traps should be
generated for this interface.

By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface…
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.18
agPortCurCfgTagPVIDThis is PVID tag state of the portEnumeration
Enumerated Values:
2tagged
3untagged
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.19
agPortCurCfgMulticastThresholdCurrent status of the port's Multicast Threshold.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.20
agPortCurCfgMulticastThresholdRateCurrent port's Multicast Threshold Rate.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.21
agPortCurCfgBroadcastThresholdCurrent status of the port's Broadcast Threshold.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.22
agPortCurCfgBroadcastThresholdRateCurrent port's Broadcast Threshold Rate.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.23
agPortCurCfgDLFThresholdCurrent status of the port's Destination Lookup Fail Threshold.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.24
agPortCurCfgDLFThresholdRateCurrent port's Destination Lookup Fail Threshold Rate.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.25
agPortCurCfgPortMediaThe switch port media.Enumeration
Enumerated Values:
0auto
1copper
2fiber
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.26
agPortCurCfgPortMediatThe switch port media.Enumeration
Enumerated Values:
0sfp
1copper
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.27
agPortCurCfgTypeThe switch port type.OctetString
Constraints:
range: 0-65
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.2.1.28
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3 · 1 row entry · 21 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk agPortNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::agPortNewCfgTable'
The table of port configuration in the new_configuration block.
agPortNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1
A row in the port configuration table in the new_configuration block.
Column Syntax OID
agPortNewCfgIndxThe index of the row in port configurations table.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.1
agPortNewCfgStateThis is the state of the port.Enumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.2
agPortNewCfgVlanTagThis is VLAN tag state of the portEnumerationr/w
Enumerated Values:
2tagged
3untagged
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.3
agPortNewCfgRmonThis object is used to turn RMON on or off on the port.Enumerationr/w
Enumerated Values:
2on
3off
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.5
agPortNewCfgPVIDThe default VLAN ID for the port.Integer32r/w
Constraints:
range: 1-4095
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.6
agPortNewCfgGigEthAutoNegThis object is used to turn the autonegotiation on or off
for gigabit Ethernet connection.
Enumerationr/w
Enumerated Values:
2on
3off
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.11
agPortNewCfgGigEthSpeedSelects the port speed for gigabit Ethernet connection.Enumerationr/w
Enumerated Values:
2mbs10
3mbs100
4any
5mbs1000
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.12
agPortNewCfgGigEthModeThis object is used to select port mode for gigabit Ethernet connection.Enumerationr/w
Enumerated Values:
2full-duplex
3half-duplex
4any
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.13
agPortNewCfgGigEthFctlThis object is used to select port flow control for
gigabit Ethernet connection.
Enumerationr/w
Enumerated Values:
2transmit
3receive
4both
5none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.14
agPortNewCfgPortNameThe switch port name.OctetStringr/w
Constraints:
range: 0-65
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.15
agPortNewCfgLinkTrapIndicates whether linkUp/linkDown traps should be
generated for this interface.

By default, this object should have the value
enabled(1) for interfaces which do not operate on
'top' of any other interface…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.18
agPortNewCfgTagPVIDThis is PVID tag state of the portEnumerationr/w
Enumerated Values:
2tagged
3untagged
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.19
agPortNewCfgMulticastThresholdNew status of the port's Multicast Threshold.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.20
agPortNewCfgMulticastThresholdRateNew port's Multicast Threshold Rate.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.21
agPortNewCfgBroadcastThresholdNew status of the port's Broadcast Threshold.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.22
agPortNewCfgBroadcastThresholdRateNew port's Broadcast Threshold Rate.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.23
agPortNewCfgDLFThresholdNew status of the port's Destination Lookup Fail Threshold.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.24
agPortNewCfgDLFThresholdRateNew port's Destination Lookup Fail Threshold Rate.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.25
agPortNewCfgPortMediaNew status of the port's Media.Enumerationr/w
Enumerated Values:
0auto
1copper
2fiber
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.26
agPortNewCfgPortMediatNew status of the port's Media.Enumerationr/w
Enumerated Values:
0sfp
1copper
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.27
agPortNewCfgTypeThe switch port type.OctetString
Constraints:
range: 0-65
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.2.3.1.28
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.11 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk agSyslogMsgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::agSyslogMsgTable'
The table of syslog messages.
agSyslogMsgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.11.1
A syslog message stored on the switch.
Column Syntax OID
agSyslogMsgIndexThe syslog message table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.11.1.1
agSyslogMessageThe syslog message.OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.5.11.1.2

agApplyTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.5 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk agApplyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::agApplyTable'
The table of URL path for URL load balancing in the current_config.
agApplyTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.5.1
Information about an URL path for URL load balancing.
Indexes
Column Syntax OID
agApplyIndexThe table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.5.1.1
agApplyStringA string in the apply table.OctetString.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.8.5.1.2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.31 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk agTacacsUserMapCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::agTacacsUserMapCurCfgTable'
The table of tacacs+ user map current configuration.
agTacacsUserMapCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.31.1
A row in the tacacs+ user mapping table.
Column Syntax OID
agTacacsUserMapCurCfgUIdThe current config remote privilege identifier.
The identifier value corresponds to the remote privilege.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.31.1.1
agTacacsUserMapCurCfgMappingCurrent Tacacs+ user privilege mappings.
The correspondence between the local privilege and the remote privilege is:
- The remote privilege is the privilege identifier value
- The local privilege is the mapped value(u…
Enumeration
Enumerated Values:
0none
1user
2oper
3admin
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.31.1.2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.32 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk agTacacsUserMapNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::agTacacsUserMapNewCfgTable'
The table of tacacs+ user map new configuration.
agTacacsUserMapNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.32.1
A row in the tacacs+ user mapping table.
Column Syntax OID
agTacacsUserMapNewCfgUIdThe new config remote privilege identifier.
The identifier value corresponds to the remote privilege.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.32.1.1
agTacacsUserMapNewCfgMappingSet new Tacacs+ user privilege mappings.
The correspondence between the local privilege and the remote privilege is:
- The remote privilege is the privilege identifier value
- The local privilege is the mapped value(u…
Enumerationr/w
Enumerated Values:
0none
1user
2oper
3admin
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.10.32.1.2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk agCurCfgMgmtNetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::agCurCfgMgmtNetTable'
The table for Management Network definitions
in the current configuration block.
agCurCfgMgmtNetEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2.1
A row in the management network definition table.
Column Syntax OID
agCurCfgMgmtNetIndexThe index of the Management Network Definition table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2.1.1
agCurCfgMgmtNetSubnetThe Management Network Address in the current_configuration
block.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2.1.2
agCurCfgMgmtNetMaskThe Management Network Mask in the current_configuration
block.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.2.1.3
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk agNewCfgMgmtNetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::agNewCfgMgmtNetTable'
The table for Management Network definitions
in the new configuration block.
agNewCfgMgmtNetEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1
A row in the management network definition table.
Column Syntax OID
agNewCfgMgmtNetIndexThe index of the Management Network Definition table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1.1
agNewCfgMgmtNetSubnetThe Management Network Address in the new_configuration
block.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1.2
agNewCfgMgmtNetMaskThe Management Network Mask in the new_configuration
block.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1.3
agNewCfgMgmtNetDeleteBy setting the value to delete(2), the entire row is deleted.Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.11.3.1.4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk agAccessUserCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::agAccessUserCurCfgTable'
The table of Access user configuration.
agAccessUserCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1
A row in the Access user configuration table.
Column Syntax OID
agAccessUserCurCfgUIdThe User identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.1
agAccessUserCurCosThe user class of service.Enumeration
Enumerated Values:
0user
3oper
6admin
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.2
agAccessUserCurCfgNameThe user name.OctetString
Constraints:
range: 0-8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.3
agAccessUserCurCfgPswdThe character string representing the user passworde.OctetString
Constraints:
range: 0-128
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.4
agAccessUserCurCfgStateEnable or disable a user.Enumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.2.1.5
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk agAccessUserNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::agAccessUserNewCfgTable'
The table of Access user configuration.
agAccessUserNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1
A row in the Access user configuration table.
Column Syntax OID
agAccessUserNewCfgUIdThe User identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.1
agAccessUserNewCosThe user class of service.Enumerationr/w
Enumerated Values:
0user
3oper
6admin
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.2
agAccessUserNewCfgNameThe user name.OctetStringr/w
Constraints:
range: 0-8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.3
agAccessUserNewCfgPswdThe character string representing the user passworde.OctetStringr/w
Constraints:
range: 0-128
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.4
agAccessUserNewCfgStateEnable or disable a user.Enumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.5
agAccessUserNewCfgDeleteThis is an action object to create or delete a User.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a User
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.1.12.3.1.6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1 · 1 row entry · 21 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk portStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::portStatsTable'
The table of port statistics.
portStatsTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1
A row in the port stats table.
Indexes
Column Syntax OID
portStatsIndxThe port index.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.1
portStatsPhyIfInOctetsThe total number of octets received on the
interface, including framing characters.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.2
portStatsPhyIfInUcastPktsThe number of subnetwork-unicast packets
delivered to a higher-layer protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.3
portStatsPhyIfInNUcastPktsThe number of non-unicast (i.e., subnetwork-
broadcast or subnetwork-multicast) packets
delivered to a higher-layer protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.4
portStatsPhyIfInDiscardsThe number of inbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being deliverable to a
higher-layer protocol. One possible reason for
discarding such a packet co…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.5
portStatsPhyIfInErrorsThe number of inbound packets that contained
errors preventing them from being deliverable to a
higher-layer protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.6
portStatsPhyIfInUnknownProtosThe number of packets received via the interface
which were discarded because of an unknown or
unsupported protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.7
portStatsPhyIfOutOctetsThe total number of octets transmitted out of the
interface, including framing characters.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.8
portStatsPhyIfOutUcastPktsThe total number of packets that higher-level
protocols requested be transmitted to a
subnetwork-unicast address, including those that
were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.9
portStatsPhyIfOutNUcastPktsThe total number of packets that higher-level
protocols requested be transmitted to a non-
unicast (i.e., a subnetwork-broadcast or
subnetwork-multicast) address, including those
that were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.10
portStatsPhyIfOutDiscardsThe number of outbound packets which were chosen
to be discarded even though no errors had been
detected to prevent their being transmitted. One
possible reason for discarding such a packet could
be to free up buffer s…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.11
portStatsPhyIfOutErrorsThe number of outbound packets that could not be
transmitted because of errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.12
portStatsPhyIfOutQLenThe length of the output packet queue (in
packets).
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.13
portStatsPhyIfInBroadcastPktsThe number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
broadcast address at this sub-layer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.14
portStatsPhyIfOutBroadcastPktsThe total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a broadcast address at this sub-layer,
including those that were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.15
portStatsClearSetting this value to clear(1) clears the stats for this port.Enumerationr/w
Enumerated Values:
1clear
2ok
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.16
portStatsPhyIfInMulticastPktsThe number of packets, delivered by this sub-layer to
a higher (sub-)layer, which were addressed to a
multicast address at this sub-layer.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.17
portStatsPhyIfOutMulticastPktsThe total number of packets that higher-level
protocols requested be transmitted, and which were
addressed to a multicast address at this sub-layer,
including those that were discarded or not sent.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.18
portStatsLinkStateChangeNumber of link state changes.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.20
portStatsPhyIfInFctlPktsThe number of inbound flow control packets.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.21
portStatsPhyIfOutFctlPktsThe number of outbound flow control packets.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.1.1.22
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2 · 1 row entry · 31 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk dot1xPortStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::dot1xPortStatsTable'
The table of 802.1x port statistics.
dot1xPortStatsTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1
A row in the 802.1x port stats table.
Column Syntax OID
dot1xPortStatsIndxThe 802.1x port stats index.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.1
eapolFramesRxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.2
eapolFramesTxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.3
eapolStartFramesRxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.4
eapolLogoffFramesRxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.5
eapolRespIdFramesRxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.6
eapolRespFramesRxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.7
eapolReqIdFramesTxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.8
eapolReqFramesTxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.9
invalidEapolFramesRxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.10
eapLengthErrorFramesRxSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.11
authEntersConnectingSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.12
authEapLogoffsWhileConnectingSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.13
authEntersAuthenticatingSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.14
authSuccessesWhileAuthenticatingSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.15
authTimeoutsWhileAuthenticatingSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.16
authFailWhileAuthenticatingSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.17
authReauthsWhileAuthenticatingSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.18
authEapStartsWhileAuthenticatingSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.19
authEapLogoffWhileAuthenticatingSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.20
authReauthsWhileAuthenticatedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.21
authEapStartsWhileAuthenticatedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.22
authEapLogoffWhileAuthenticatedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.23
backendResponsesSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.24
backendAccessChallengesSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.25
backendOtherRequestsToSupplicantSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.26
backendNonNakResponsesFromSupplicantSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.27
backendAuthSuccessesSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.28
backendAuthFailsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.29
lastEapolFrameVersionSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.30
lastEapolFrameSourceSNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.2.1.31
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3 · 1 row entry · 26 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk allportsStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::allportsStatsTable'
The table of all ports statistics.
allportsStatsTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1
A row in the table of all ports statistics.
Column Syntax OID
allportsStatsIndxThe port number.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.1
allportsStatsDescrThe port description.OctetString
Constraints:
range: 0-7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.2
allportsStatsSpeedThe current operational speed of the port.Enumeration
Enumerated Values:
2mbs10
3mbs100
4mbs1000
5any
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.3
allportsStatsPhysAddressThe port MAC Address.SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.4
allportsStatsAdminStatusThe port Admin state.Enumeration
Enumerated Values:
1up
2down
3testing
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.5
allportsStatsOperStatusThe port Operational Status.Enumeration
Enumerated Values:
1up
2down
3testing
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.6
allportsStatsInOctetsOctets In for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.7
allportsStatsOutOctetsOctets Out for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.8
allportsStatsInPktsPackets In for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.9
allportsStatsOutPktsPackets Out for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.10
allportsStatsInUcastUnicast Packets In for port.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.11
allportsStatsOutUcastUnicast Packets Out for port.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.12
allportsStatsInBcastBroadcasts Packets In for port.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.13
allportsStatsOutBcastBroadcasts Packets Out for port.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.14
allportsStatsInMcastMulticast Packets In for port.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.15
allportsStatsOutMcastMulticast Packets Out for port.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.16
allportsStatsInDiscardsDiscarded Packets for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.17
allportsStatsOutDiscardsOutbound Packets for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.18
allportsStatsInErrorsError Packets for port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.19
allportsStatsOutErrorsNot sent packets due to error.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.20
allportsStatsInUnknownProtosUnknown protocol packets.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.21
allportsStatsOutQLenOutbound Packet Queue Length.OctetString
Constraints:
range: 0-20
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.22
allportsStatsipInReceivesIp In Receives.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.23
allportsStatsipInHeaderErrorsIp In Header Errors.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.24
allportsStatsipInDiscardsIp In Discards.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.25
allportsStatsLinkStateChangeNumber of link state changes.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.3.3.1.26
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk aclStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::aclStatsTable'
The table of ACL statistics.
aclStatsTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1.1
Statistics about a particular ACL configuration entry.
Indexes
Column Syntax OID
aclStatsIndexThe acl index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1.1.1
aclStatsHitsTotal number of hits for this ACL entrySNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1.1.2
aclClearStatsSetting this value to clear(2) clears the stats for the ACL.Enumerationr/w
Enumerated Values:
1ok
2clear
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.2.12.1.1.3
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1 · 1 row entry · 14 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk portInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::portInfoTable'
The table of port information.
portInfoTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1
A row in the port information table.
Indexes
Column Syntax OID
portInfoIndxThe port index.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.1
portInfoSpeedThe current operational speed of the port.Enumeration
Enumerated Values:
2mbs10
3mbs100
4mbs1000
5any
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.2
portInfoModeThe current operational mode of the port.Enumeration
Enumerated Values:
2full-duplex
3half-duplex
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.3
portInfoFlowCtrlThe current operational flow control of the port.Enumeration
Enumerated Values:
2transmit
3receive
4both
5none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.4
portInfoLinkThe current operational link status of the port.Enumeration
Enumerated Values:
1up
2down
3disabled
4inoperative
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.5
portInfoPhyIfDescrA textual string containing information about the
interface. This string should include the name of
the manufacturer, the product name and the version
of the hardware interface.
OctetString
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.6
portInfoPhyIfTypeThe type of interface, distinguished according to
the physical/link protocol(s) immediately `below'
the network layer in the protocol stack.
Enumeration
Enumerated Values:
1other
2regular1822
3hdh1822
4ddn-x25
5rfc877-x25
6ethernet-csmacd
7iso88023-csmacd
8iso88024-tokenBus
9iso88025-tokenRing
10iso88026-man
11starLan
12proteon-10Mbit
13proteon-80Mbit
14hyperchannel
15fddi
16lapb
17sdlc
18ds1
19e1
20basicISDN
21primaryISDN
22propPointToPointSerial
23ppp
24softwareLoopback
25eon
26ethernet-3Mbit
27nsip
28slip
29ultra
30ds3
31sip
32frame-relay
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.7
portInfoPhyIfMtuThe size of the largest datagram which can be
sent/received on the interface, specified in
octets. For interfaces that are used for
transmitting network datagrams, this is the size
of the largest network datagram that …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.8
portInfoPhyIfPhysAddressThe interface's address at the protocol layer
immediately `below' the network layer in the
protocol stack. For interfaces which do not have
such an address (e.g., a serial line), this object
should contain an octet str…
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.9
portInfoPhyIfOperStatusThe current operational state of the interface.
The testing(3) state indicates that no operational
packets can be passed.
Enumeration
Enumerated Values:
1up
2down
3testing
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.10
portInfoPhyIfLastChangeThe value of sysUpTime at the time the interface
entered its current operational state. If the
current state was entered prior to the last re-
initialization of the local network management
subsystem, then this object …
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.11
portInfoMediaThe switch port media.Enumeration
Enumerated Values:
0auto
1copper
2fiber
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.12
portInfoPvidThis is the operational port vlan-id of the port. Typically,
the value of this object is the same as the value of the
agPortCurCfgPVID object. But if, for example, 802.1x is
enabled on the port and the port is assigned …
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.21
portInfoVlanTagThis is the operational VLAN tag state of the port. Typically,
the value of this object is the same as the value of the
agPortCurCfgVlanTag objec. But if, for example, 802.1x is
enabled on the port and if the port is as…
Enumeration
Enumerated Values:
0untagged
1tagged
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.2.1.1.22

agDiffTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.4 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk agDiffTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::agDiffTable'
The table of URL path for URL load balancing in the current_config.
agDiffTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.4.1
Information about an URL path for URL load balancing.
Indexes
Column Syntax OID
agDiffIndexThe table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.4.1.1
agDiffStringA string in the diff table.OctetString.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.4.4.1.2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.4 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk agCfgDumpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::agCfgDumpTable'
The table of dump strings.
agCfgDumpTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.4.1
An entry in the dump table.
Indexes
Column Syntax OID
agCfgDumpIndexThe table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.4.1.1
agCfgDumpStringA string in the dump table.OctetString.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.5.4.1.2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk geaportInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::geaportInfoTable'
The table of gea port mapping.
geaportInfoTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1.1
An entry in the geaport table mapping.
Column Syntax OID
geaportInfoLogicalIndexThe logical port index.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1.1.1
geaportInfoPortThe GEA Port (0-based).SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1.1.2
geaportInfoUnitThe GEA Unit.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.7.1.1.3
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.10 · 1 row entry · 1 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ufdInfoLtDAdminkeyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ufdInfoLtDAdminkeyTable'
The table of LtD admin key configuration.
ufdInfoLtDAdminkeyTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.10.1
A row in the LtD admin key table.
Column Syntax OID
ufdInfoLtDAdminkeyThe LtD admin key.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.8.10.1.1

sfpInfoTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1 · 1 row entry · 9 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk sfpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::sfpInfoTable'
The table of external port SFP information.
sfpInfoTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1
A row in the external port SFP information table.
Indexes
Column Syntax OID
sfpInfoIndxThe external port SFX index.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.1
sfpInfoPortExternal Port SFP/XFP alias.OctetString
Constraints:
range: 0-6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.2
sfpInfoDeviceExternal Port SFP/XFP Device.OctetString
Constraints:
range: 0-6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.3
sfpInfoTXEnableExternal Port SFP/XFP TX-Enable.Enumeration
Enumerated Values:
1notInstalled
2enabled
3disabled
5notAvailable
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.4
sfpInfoRXSignalExternal Port SFP/XFP RX-Signal.Enumeration
Enumerated Values:
1notInstalled
2down
3link
4notAvailable
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.5
sfpInfoTXFaultExternal Port SFP/XFP TX-Fault.Enumeration
Enumerated Values:
1notInstalled
2fault
3none
4notAvailable
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.6
sfpInfoApprovedExternal Port SFP/XFP Approval.Enumeration
Enumerated Values:
1notInstalled
2notApproved
3sfpApproved
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.7
sfpInfoVendorExternal Port SFP/XFP device vendor.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.8
sfpInfoSerialExternal Port SFP/XFP device serial.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.3.9.1.1.9
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk agPortOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::agPortOperTable'
The table of port operations.
agPortOperTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1.1
A row in the port operations table.
Indexes
Column Syntax OID
portOperIdxThe port index.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1.1.1
portOperStateEnable/Disable port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1.1.2
portOperRmonEnable/Disable RMON for port.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.1.1.3
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk portOperDot1xTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::portOperDot1xTable'
The table of port operations.
portOperDot1xTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3.1
A row in the port 802.1x operation table.
Column Syntax OID
portOperDot1xIndxThe port index.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3.1.1
portOperDot1xResetReinitialize 802.1x access control on port.Enumerationr/w
Enumerated Values:
1no
2yes
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3.1.2
portOperDot1xReauthInitiate reauthentication on port.Enumerationr/w
Enumerated Values:
1no
2yes
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.1.4.3.1.3
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk vlanCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::vlanCurCfgTable'
The table of VLAN configuration.
vlanCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1
A row in the VLAN configuration table.
Column Syntax OID
vlanCurCfgVlanIdThe VLAN identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.1
vlanCurCfgVlanNameThe VLAN name.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.2
vlanCurCfgPortsThe port list in the VLAN. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
…
OctetString.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.3
vlanCurCfgStateEnable or disable a VLANEnumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.4
vlanCurCfgStgThe Spanning Tree Group for the VLAN.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.2.1.6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3 · 1 row entry · 8 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk vlanNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::vlanNewCfgTable'
The table of VLAN configuration.
vlanNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1
A row in the VLAN configuration table.
Column Syntax OID
vlanNewCfgVlanIdThe VLAN identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.1
vlanNewCfgVlanNameThe VLAN name.OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.2
vlanNewCfgPortsThe port list in the VLAN. The ports are presented in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ po…
OctetString.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.3
vlanNewCfgStateEnable or disable a VLANEnumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.4
vlanNewCfgAddPortThe port to be added to the specified VLAN. A '0' value is
returned when read.
PortNumberr/w.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.5
vlanNewCfgRemovePortThe port to be removed from the specified VLAN. A '0'
value is returned when read.
PortNumberr/w.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.6
vlanNewCfgDeleteThis is an action object to create or delete a VLAN.
other(1) is returned always when read.
The following values are writable: delete(2)...to delete a VLAN
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.7
vlanNewCfgStgThe Spanning Tree Group for the VLAN.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.1.3.1.9
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk trunkGroupCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::trunkGroupCurCfgTable'
The table of trunk group configuration.
trunkGroupCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2.1
A row in the trunk group configuration table.
Column Syntax OID
trunkGroupCurCfgIndexThe identifier of the trunk group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2.1.1
trunkGroupCurCfgPortsThe port list in the trunk group. The ports are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…
OctetString.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2.1.2
trunkGroupCurCfgStateEnable or disable a trunk group.Enumeration
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.2.1.3
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk trunkGroupNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::trunkGroupNewCfgTable'
The table of trunk group configuration.
trunkGroupNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1
A row in the trunk group configuration table.
Column Syntax OID
trunkGroupNewCfgIndexThe identifier of the trunk group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.1
trunkGroupNewCfgPortsThe port list in the trunk group. The ports are presented
in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…
OctetString.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.2
trunkGroupNewCfgAddPortThe port to be added in the trunk group. When read, 0 is returned.PortNumberr/w.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.3
trunkGroupNewCfgRemovePortThe port to be deleted from the trunk group. when read, 0
is returned.
PortNumberr/w.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.4
trunkGroupNewCfgStateEnable or disable a trunk group.Enumerationr/w
Enumerated Values:
1enable
2disable
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.5
trunkGroupNewCfgDeleteSetting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.2.3.1.6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1 · 1 row entry · 7 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk stgCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::stgCurCfgTable'
The table of Spanning Tree Group configuration.
stgCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1
Information about a particular Spanning Tree Group configuration.
Indexes
Column Syntax OID
stgCurCfgIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.1
stgCurCfgStateTurn on of off Spanning Tree operation of a particular Spanning
Tree Group.
Enumeration
Enumerated Values:
1on
2off
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.2
stgCurCfgPriorityThe value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.5
stgCurCfgBrgHelloTimeThe value in seconds that all bridges use for HelloTime when this
bridge is acting as the root.
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.6
stgCurCfgBrgForwardDelayThe value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.
Integer32
Constraints:
range: 4-30
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.7
stgCurCfgBrgMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.
Integer32
Constraints:
range: 6-40
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.8
stgCurCfgVlanBmapThe vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4095.

in receiving order:

OCTET 1 OCTET 2 .....…
OctetString
Constraints:
range: 0-512
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.1.1.10
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2 · 1 row entry · 10 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk stgNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::stgNewCfgTable'
The table of Spanning Tree Groups configuration in the new_config.
stgNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1
Information about a particular Spanning Tree Group configuration.
Indexes
Column Syntax OID
stgNewCfgIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.1
stgNewCfgStateTurn on of off Spanning Tree operation of a particular Spanning
Tree Group.
Enumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.2
stgNewCfgDefaultCfgSetting the value to default-config(1) will set the default
configuration as recommended by IEEE 802.1D for a particular
Spanning Tree Group. default-config (1) is always returned
When read, but it does not mean anyt…
Enumerationr/w
Enumerated Values:
1default-config
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.3
stgNewCfgAddVlanThe vlan to be added to the specified Spanning Tree Group. A
'0' value is returned when read.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.4
stgNewCfgRemoveVlanThe vlan to be removed from the specified Spanning Tree Group.
A '0' value is returned when read.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.5
stgNewCfgPriorityThe value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID.
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.8
stgNewCfgBrgHelloTimeThe value in seconds that all bridges use for HelloTime when this
bridge is acting as the root.
Integer32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.9
stgNewCfgBrgForwardDelayThe value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.
Integer32r/w
Constraints:
range: 4-30
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.10
stgNewCfgBrgMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.
Integer32r/w
Constraints:
range: 6-40
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.11
stgNewCfgVlanBmapThe vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4095.

in receiving order:

OCTET 1 OCTET 2 .....…
OctetString
Constraints:
range: 0-512
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.2.1.13
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3 · 1 row entry · 8 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk stgCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::stgCurCfgPortTable'
The table of Spanning Tree Group port configuration in the
current_config.
stgCurCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1
Information about port configuration of a particular Spanning Tree
Group.
Column Syntax OID
stgCurCfgStgIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.1
stgCurCfgPortIndexThe port identifier of a particular Spanning Tree Group.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.2
stgCurCfgPortStateTurn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group.
Enumeration
Enumerated Values:
1on
2off
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.3
stgCurCfgPortPriorityThe value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.4
stgCurCfgPortPathCostThe contribution of this port to the path cost of paths towards the
spanning tree root which include this port.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.5
stgCurCfgPortLinkThe type of the port link. (for RSTP only)Enumeration
Enumerated Values:
1auto
2p2p
3shared
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.6
stgCurCfgPortEdgeThe state of port edge. (for RSTP only)Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.7
stgCurCfgPortFastFwdThe state of port fast forwarding.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.3.1.8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4 · 1 row entry · 8 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk stgNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::stgNewCfgPortTable'
The table of Spanning Tree Group port configuration in the
new_config.
stgNewCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1
Information about port configuration of a particular Spanning Tree
Group.
Column Syntax OID
stgNewCfgStgIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.1
stgNewCfgPortIndexThe port identifier of a particular Spanning Tree Group.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.2
stgNewCfgPortStateTurn on of off Spanning Tree operation of a particular port of a
Spanning Tree Group.
Enumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.3
stgNewCfgPortPriorityThe value of the priority field which is contained in the first
(in network byte order) octet of the (2 octet long) Port ID.
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.4
stgNewCfgPortPathCostThe contribution of this port to the path cost of paths towards the
spanning tree root which include this port.
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.5
stgNewCfgPortLinkThe type of the port link. (for RSTP only)Enumerationr/w
Enumerated Values:
1auto
2p2p
3shared
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.6
stgNewCfgPortEdgeThe state of port edge. (for RSTP only)Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.7
stgNewCfgPortFastFwdThe state of port fast forwarding.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.3.4.1.8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk pmCurCfgPortMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::pmCurCfgPortMonitorTable'
The table of monitoring ports.
pmCurCfgPortMonitorEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3.1
A row in the monitoring port table.
Column Syntax OID
pmCurCfgPmirrMoniPortIndexThe monitoring port number.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3.1.1
pmCurCfgPmirrMirrPortIndexThe mirrored port numberPortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3.1.2
pmCurCfgPmirrDirectionThe type of traffic to be monitored with respect to the
mirrored port.
Enumeration
Enumerated Values:
1in
2out
3both
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.3.1.3
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk pmNewCfgPortMonitorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::pmNewCfgPortMonitorTable'
The table of monitoring ports.
pmNewCfgPortMonitorEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1
A row in the monitoring port table.
Column Syntax OID
pmNewCfgPmirrMoniPortIndexThe monitoring port number.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.1
pmNewCfgPmirrMirrPortIndexThe mirrored port numberPortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.2
pmNewCfgPmirrDirectionThe type of traffic to be monitored with respect to the
mirrored port.
Enumerationr/w
Enumerated Values:
1in
2out
3both
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.3
pmNewCfgPmirrDeleteSetting the value to delete(2) will delete the entire
row. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.4
pmNewCfgPmonDeleteSetting the value to delete(2) will delete the monitor
port. When read, other(1) is returned.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.4.1.4.1.10
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3 · 1 row entry · 7 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk mstCistCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::mstCistCurCfgPortTable'
The table of CIST Port configuration.
mstCistCurCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1
Information about a particular CIST Port configuration.
Column Syntax OID
mstCistCurCfgPortIndexThe port number of the port for which this entry contains spanning
tree configuration.
PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.1
mstCistCurCfgPortPriorityThe four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.
Integer32
Constraints:
range: 0-240
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.2
mstCistCurCfgPortPathCostThe contribution of this port to the path cost of paths towards
the CIST Root which include this port.
Integer32
Constraints:
range: 0-200000000
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.3
mstCistCurCfgPortLinkTypeThe administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shar…
Enumeration
Enumerated Values:
1auto
2p2p
3shared
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.4
mstCistCurCfgPortEdgeThe value of the Edge Port parameter. (for MSTP only)Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.5
mstCistCurCfgPortStpStateTurn port's Spanning Tree on/off.Enumeration
Enumerated Values:
1on
2off
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.6
mstCistCurCfgPortHelloTimeThe amount of time between the transmission of Configuration Port
PDUs in seconds.
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.3.1.7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4 · 1 row entry · 7 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk mstCistNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::mstCistNewCfgPortTable'
The table of CIST Port configuration.
mstCistNewCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1
Information about a particular CIST Port configuration.
Column Syntax OID
mstCistNewCfgPortIndexThe port number of the port for which this entry contains spanning
tree configuration.
PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.1
mstCistNewCfgPortPriorityThe four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.
Integer32r/w
Constraints:
range: 0-240
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.2
mstCistNewCfgPortPathCostThe contribution of this port to the path cost of paths towards
the CIST Root which include this port.
Integer32r/w
Constraints:
range: 0-200000000
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.3
mstCistNewCfgPortLinkTypeThe administrative point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port should
always be treated as if it is connected to a point-to-point link.
A value of shar…
Enumerationr/w
Enumerated Values:
1auto
2p2p
3shared
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.4
mstCistNewCfgPortEdgeThe value of the Edge Port parameter. (for MSTP only)Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.5
mstCistNewCfgPortStpStateTurn port's Spanning Tree on/off.Enumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.6
mstCistNewCfgPortHelloTimeThe amount of time between the transmission of Configuration Port
PDUs in seconds.
Integer32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.5.2.4.1.7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk lacpCurPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::lacpCurPortCfgTable'
The table of LACP port configuration.
lacpCurPortCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1
A row in the LACP port configuration table.
Column Syntax OID
lacpCurPortCfgTableIdLACP port number.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1.1
lacpCurPortStateLACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer.
Enumeration
Enumerated Values:
1off
2active
3passive
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1.2
lacpCurPortActorPortPriorityThe priority value assigned to this Aggregation Port.
This 16-bit value is read-only.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1.3
lacpCurPortActorAdminKeyThe current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-only value.
The meaning of particular Key values is of local
significance.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.7.1.4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk lacpNewPortCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::lacpNewPortCfgTable'
The table of LACP port configuration.
lacpNewPortCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1
A row in the LACP port configuration table.
Column Syntax OID
lacpNewPortCfgTableIdLACP port number.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1.1
lacpNewPortStateLACP port state can be one of three states
off (Not participating in LACP)
Active (Initiates LACPDU updates)
Passive (Does not initiate LACPDU updates but responds to peer.
Enumerationr/w
Enumerated Values:
1off
2active
3passive
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1.2
lacpNewPortActorPortPriorityThe priority value assigned to this Aggregation Port.
This 16-bit value is read-write.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1.3
lacpNewPortActorAdminKeyThe current administrative value of the Key for the
Aggregation Port. This is a 16-bit read-write value.
The meaning of particular Key values is of local
significance.
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.6.8.1.4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.14 · 1 row entry · 1 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ufdLtDAdminkeyCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ufdLtDAdminkeyCurCfgTable'
The table of LtD admin key configuration.
ufdLtDAdminkeyCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.14.1
A row in the LtD admin key table.
Column Syntax OID
ufdLtDAdminkeyCurCfgThe LtD admin key.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.14.1.1
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.15 · 1 row entry · 1 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ufdLtDAdminkeyNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ufdLtDAdminkeyNewCfgTable'
The table of LtD admin key configuration.
ufdLtDAdminkeyNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.15.1
A row in the LtD admin key table.
Column Syntax OID
ufdLtDAdminkeyNewCfgThe LtD admin key.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.9.1.15.1.1
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3 · 1 row entry · 9 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk dot1xCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::dot1xCurCfgPortTable'
The table of 8021x configuration in the Current_config.
dot1xCurCfgPortEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1
Information about 8021x Port Config
Column Syntax OID
dot1xCurCfgPortIndexThe 8021x Port number for which the table is related.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.1
dot1xCurCfgPortModePort authenticaton mode
forceUnauth(0),
auto(1),
forceAuth(2)
Enumeration
Enumerated Values:
0forceUnauth
1auto
2forceAuth
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.2
dot1xCurCfgPortQtPeriodQuiet period (0-65535)Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.3
dot1xCurCfgPortTxPeriodTx PeriodInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.4
dot1xCurCfgPortSupTmoutSupplicant timeout (1..65535)Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.5
dot1xCurCfgPortSrvTmoutServer timeout (1..65535)Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.6
dot1xCurCfgPortMaxRqMaximum numer of requests (1..10)Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.7
dot1xCurCfgPortRaPeriodReautentication period (0..604800)Integer32
Constraints:
range: 0-604800
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.8
dot1xCurCfgPortReAuthReAuthentication state
off(0),
on(1)
Enumeration
Enumerated Values:
0off
1on
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.3.1.9
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4 · 1 row entry · 11 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk dot1xNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::dot1xNewCfgPortTable'
The table of 8021x configuration in the new_config.
dot1xNewCfgPortEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1
Information about 8021x Port Config
Column Syntax OID
dot1xNewCfgPortIndexThe 8021x Port number for which the table is related.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.1
dot1xNewCfgPortModePort authentication mode
forceUnauth(0),
auto(1),
forceAuth(2)
Enumerationr/w
Enumerated Values:
0forceUnauth
1auto
2forceAuth
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.2
dot1xNewCfgPortQtPeriodQuiet period (0..65535)Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.3
dot1xNewCfgPortTxPeriodTx Period (1..65535)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.4
dot1xNewCfgPortSupTmoutSupplicant Timeout (1..65535)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.5
dot1xNewCfgPortSrvTmoutServer Timeout (1..65535)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.6
dot1xNewCfgPortMaxRqMaximum number of requests (1..10)Integer32r/w
Constraints:
range: 1-10
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.7
dot1xNewCfgPortRaPeriodReauthentication period (1..604800)Integer32r/w
Constraints:
range: 1-604800
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.8
dot1xNewCfgPortReAuthReauthentication state
off(0),
on(1)
Enumerationr/w
Enumerated Values:
0off
1on
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.9
dot1xNewCfgPortDefaultPort default settingsEnumerationr/w
Enumerated Values:
0other
1apply
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.10
dot1xNewCfgPortApplyGlobalApply Global configEnumerationr/w
Enumerated Values:
0other
1apply
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.11.4.1.11
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk fdbNewCfgStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::fdbNewCfgStaticTable'
The table of FDB static entries.
fdbNewCfgStaticEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1
A row in the fdb table.
Column Syntax OID
fdbNewCfgEntryIndexThe fdb entry indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.1
fdbNewCfgAddVlanAdd vlan for fdb entry indexSNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.2
fdbNewCfgAddPortThe MAC address port number.PortNumberr/w.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.3
fdbNewCfgAddMacAdd a fdb entry.SNMPv2-TCPhysAddressr/w
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.4
fdbNewCfgDelStaticEntryWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.2.1.5
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk fdbCurCfgStaticTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::fdbCurCfgStaticTable'
The table of FDB static entries.
fdbCurCfgStaticEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1
A row in the fdb table.
Column Syntax OID
fdbCurCfgEntryIndexThe fdb entry indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1.1
fdbCurCfgVlanAdd vlan for fdb entry indexSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1.2
fdbCurCfgPortThe MAC address port number.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1.3
fdbCurCfgMacAdd a fdb entry.SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.1.12.3.1.4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk stgStatsPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::stgStatsPortTable'
The table of Spanning Tree Group port statistics.
stgStatsPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1
Statistics about port of a particular Spanning Tree Group.
Column Syntax OID
stgStatsStpIndexThe identifier of a particular Spanning Tree Group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.1
stgStatsPortIndexThe port identifier of a particular Spanning Tree Group.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.2
stgStatsPortRcvCfgBpdusNumber of Configuration BPDU's received on this port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.3
stgStatsPortRcvTcnBpdusNumber of TCN BPDU's received on this port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.4
stgStatsPortXmtCfgBpdusNumber of Configuration BPDU's trasmitted from the port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.5
stgStatsPortXmtTcnBpdusNumber of TCN BPDU's trasmitted from the port.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.2.1.1.6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1 · 1 row entry · 10 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk lacpStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::lacpStatsTable'
The table of LACP Stats.
lacpStatsTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1
Lacp status info.
Indexes
Column Syntax OID
lacpStatsIndexIndexPortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.1
lacpdusRxValid LACPDUs receivedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.2
markerpdusRxValid Marker PDUs receivedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.3
markerresponsepdusRxValid Marker Rsp PDUs receivedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.4
unknownRxUnknown version/TLV typeSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.5
illegalRxIllegal subtype receivedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.6
lacpdusTxLACPDUs transmittedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.7
markerpdusTxMarket PDUs transmittedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.8
markerresponsepdusTxMarker Rsp PDUs transmittedSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.9
lacpClearStatsSetting this to clear(2) results in clearing the LACP statistics.Enumerationr/w
Enumerated Values:
1ok
2clear
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.2.3.1.1.10
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2 · 1 row entry · 9 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk cistInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::cistInfoPortTable'
The table of CIST Port information.
cistInfoPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1
Information about a particular CIST Port.
Column Syntax OID
cistInfoPortIndexThe port number of the port for which this entry contains spanning
tree configuration.
PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.1
cistInfoPortPriorityThe four most significant bits of the Port Identifier of the
Spanning Tree instance can be modified by setting this value.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.2
cistInfoPortPathCostThe contribution of this port to the path cost of paths towards
the CIST Root which include this port.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.3
cistInfoPortStateCurrent state of the Port as defined by the Common
spanning tree protocol.
Enumeration
Enumerated Values:
1disabled
2discarding
4learning
5forwarding
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.4
cistInfoPortRoleSelected Port Role of the port for this spanning tree instance.Enumeration
Enumerated Values:
1disabled
2alternate
3backup
4root
5designated
6master
7unknown
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.5
cistInfoPortDesignatedBridgeThe unique Bridge Identifier of the bridge which this port
considers to be the Designated Bridge for the port's segment.
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.6
cistInfoPortDesignatedPortThe Port identifier of the port on the Designated Bridge
for this port's segment.
OctetString
Constraints:
range: 2-2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.7
cistInfoPortLinkTypeThe point-to-point status of the LAN segment attached
to this port. A value of p2p (2) indicates that this port is being
treated as if it is connected to a point-to-point link.
A value of shared(3) indicates that thi…
Enumeration
Enumerated Values:
1p2p
2shared
3unknown
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.8
cistInfoPortHelloTimeThe amount of time between the transmission of Configuration Port
PDUs in seconds.
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.1.2.1.9

fdbTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk fdbTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::fdbTable'
The table of FDB entries.
fdbEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1
A row in the FDB table
Indexes
Column Syntax OID
fdbMacAddrThe MAC address for the FDB entry.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.1
fdbVlanThe VLAN ID for the FDB entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.2
fdbSrcPortEither the value '0', or the port number of the port on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the port
number has not bee…
PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.3
fdbStateThe state of the FDB entry. The meanings of the values are :
unknown(1) : the MAC address has not yet been learned by the switch
but has only been seen as a destination address
forward(2) : the MAC address …
Enumeration
Enumerated Values:
1unknown
2forward
3trunk
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.4
fdbSrcTrunkEither the value '0', or the trunk number of the trunk on which a frame
having a source address equal to the value of the corresponding
instance has been seen. A value of '0' indicates that the source
address is not as…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.7
fdbStatus'1' if it is permanent
'0' if it is not permanent
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.2.2.1.8

stpInfoTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1 · 1 row entry · 17 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk stpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::stpInfoTable'
The table of Spanning Tree Group information.
stpInfoTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1
Information about a particular Spanning Tree Group.
Indexes
Column Syntax OID
stpInfoIndexThe identifier of a particular Spanning Tree Group. This is also
index to the entLogicalTable of Entity MIB.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.1
stpInfoStateTurn on of off Spanning Tree operation of a particular Spanning
Tree Group.
Enumeration
Enumerated Values:
1on
2off
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.2
stgInfoVlanBmapThe vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 4096.

in receiving order:

OCTET 1 OCTET 2 .....
…
OctetString
Constraints:
range: 0-512
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.3
stpInfoTimeSinceTopChangeThe time (in hundredths of a second) since the last time a topology
change was detected by the bridge entity.
SNMPv2-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.4
stpInfoTopChangesThe total number of topology changes detected by this bridge since
the management entity was last reset or initialized.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.5
stpInfoDesignatedRootThe bridge identifier of the root of the spanning tree as determined
by the Spanning Tree Protocol as executed by this node. This value
is used as the Root Identifier parameter in all Configuration Bridge
PDUs origi…
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.6
stpInfoRootCostThe cost of the path to the root as seen from this bridge.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.7
stpInfoRootPortThe port number of the port which offers the lowest cost path from
this bridge to the root bridge.
PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.8
stpInfoMaxAgeThe maximum age of Spanning Tree Protocol information learned from
the network on any port before it is discarded, in units of
hundredths of a second. This is the actual value that this bridge is
currently using.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.9
stpInfoHelloTimeThe amount of time between the transmission of Configuration bridge
PDUs by this node on any port when it is the root of the spanning
tree or trying to become so, in units of hundredths of a second.
This is the actual…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.10
stpInfoForwardDelayThis time value, measured in units of hundredths of a second,
controls how fast a port changes its spanning state when moving
towards the Forwarding state. The value determines how long the port
stays in each of the …
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.11
stpInfoHoldTimeThis time value determines the interval length during which no more
than two Configuration bridge PDUs shall be transmitted by this node,
in units of hundredths of a second.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.12
stpInfoBrgPriorityThe value of the write-able portion of the Bridge ID, i.e., the first
two octets of the (8 octet long) Bridge ID.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.13
stpInfoBrgHelloTimeThe value in seconds that all bridges use for HelloTime when this
bridge is acting as the root.
Integer32
Constraints:
range: 1-10
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.14
stpInfoBrgForwardDelayThe value in seconds that all bridges use for ForwardDelay when this
bridge is acting as the root.
Integer32
Constraints:
range: 4-30
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.15
stpInfoBrgMaxAgeThe value in seconds that all bridges use for MaxAge when this bridge
is acting as the root.
Integer32
Constraints:
range: 6-40
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.16
stpInfoAgingTimeThe timeout period in seconds for aging out dynamically learned
forwarding information.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.1.1.17
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2 · 1 row entry · 9 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk stpInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::stpInfoPortTable'
The table of Spanning Tree Group port information.
stpInfoPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1
Information about port configuration for a particular Spanning Tree
Group.
Column Syntax OID
stpInfoPortStpIndexThe identifier of a particular Spanning Tree Group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.1
stpInfoPortIndexThe port identifier of a particular Spanning Tree Group.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.2
stpInfoPortStateThe port's current state as defined by application of the Spanning
Tree Protocol. This state controls what action a port takes on
reception of a frame. If the bridge has detected a port that is
malfunctioning it wil…
Enumeration
Enumerated Values:
1disabled
2blocking
3listening
4learning
5forwarding
6broken
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.3
stpInfoPortDesignatedRootThe unique Bridge Identifier of the Bridge recorded as the Root in
the Configuration BPDUs transmitted by the Designated Bridge for the
segment to which the port is attached.
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.4
stpInfoPortDesignatedCostThe path cost of the Designated Port of the segment connected to this
port. This value is compared to the Root Path Cost field in received
bridge PDUs.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.5
stpInfoPortDesignatedBridgeThe Bridge Identifier of the bridge which this port considers to be
the Designated Bridge for this port's segment.
BRIDGE-MIBBridgeId
Type Constraints:
range: 8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.6
stpInfoPortDesignatedPortThe Port Identifier of the port on the Designated Bridge for this
port's segment.
OctetString
Constraints:
range: 2-2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.7
stpInfoPortForwardTransitionsThe number of times this port has transitioned from the Learning
state to the Forwarding state.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.8
stpInfoPortPathCostThe path cost of the port.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.3.2.1.9
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1 · 1 row entry · 14 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk lacpInfoAggrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::lacpInfoAggrTable'
The table of LACP aggregator information.
lacpInfoAggrTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1
Information about a LACP aggregator.
Column Syntax OID
lacpInfoAggrIndexThe aggregator identifier.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.1
lacpInfoAggrIdSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.2
lacpInfoAggrMacSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.3
lacpInfoAggrActSysPrioSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.4
lacpInfoAggrActSysIdSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.5
lacpInfoAggrIndivStateEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.6
lacpInfoAggrActAdminKeySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.7
lacpInfoAggrActOperKeySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.8
lacpInfoAggrPartSysPrioSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.9
lacpInfoAggrPartSysIdSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.10
lacpInfoAggrPartOperKeySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.11
lacpInfoAggrReadyStateEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.12
lacpInfoAggrNumPortsSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.13
lacpInfoAggrPortsSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.1.1.14
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1 · 1 row entry · 23 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk lacpInfoPortGeneralTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::lacpInfoPortGeneralTable'
The table of LACP port general information.
lacpInfoPortGeneralTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1
General information about a LACP port.
Column Syntax OID
lacpInfoPortGeneralIndexThe port identifier.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.1
lacpInfoPortLacpEnaEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.2
lacpInfoPortAdminEnaEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.3
lacpInfoPortActSysIdSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.4
lacpInfoPortActSysPrioSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.5
lacpInfoPortActAdminKeySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.6
lacpInfoPortActOperKeySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.7
lacpInfoPortActPortNumSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.8
lacpInfoPortActPortPrioSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.9
lacpInfoPortIndivStateEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.10
lacpInfoSelAggrIdSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.11
lacpInfoAttAggrIdSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.12
lacpInfoPortReadyNTrue value for Ready_N flag indicates that the wait while timer
has expired and it is waiting to attach to an aggregator.
There is one Ready_N value for each port.
Enumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.13
lacpInfoPortNttNeed to transmit flag. True indicates that there is new protocol
information that should be transmitted on the link.
Enumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.14
lacpInfoPortSelectedSelected flag value indicates that the selection logic has selected
an appropriate Aggregator. A value of unselected indicates that no
aggregator is currently selected. A value of standby indicates that
although the se…
Enumeration
Enumerated Values:
1selected
2unselected
3standby
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.15
lacpInfoPortMovedPort Moved flag is set to true if the receive machine for a port
is in the port_disabled state, and the combination of partner oper
system and partner oper port number in use by the port has been
used by received in a…
Enumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.16
lacpInfoCollDetStateEnumeration
Enumerated Values:
1on
2off
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.17
lacpInfoPortRxStateSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.18
lacpInfoPortMuxStateSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.19
lacpInfoPortPerStateSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.20
lacpInfoPortPerTraTimerPeriodic Transmit TimerSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.21
lacpInfoPortCurWhileTimerCurrent While TimerSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.22
lacpInfoPortOperStateThe current operational state of LACP on the port.Enumeration
Enumerated Values:
1disabled
2up
3down
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.1.1.23
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2 · 1 row entry · 10 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk lacpInfoPortAdminTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::lacpInfoPortAdminTable'
The table of LACP port admin information.
lacpInfoPortAdminTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1
Admin information about a LACP port.
Column Syntax OID
lacpInfoPortAdminIndexThe port identifier.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.1
lacpInfoPortActAdPortStateThe state of Actor Administrator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.7
lacpInfoPortActAdActivEnumeration
Enumerated Values:
1active
2passive
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.8
lacpInfoPortActAdSyncEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.9
lacpInfoPortActAdDefEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.10
lacpInfoPortActAdTimeoutEnumeration
Enumerated Values:
1short
2long
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.11
lacpInfoPortActAdCollEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.12
lacpInfoPortActAdExpEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.13
lacpInfoPortActAdAggrEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.14
lacpInfoPortActAdDistEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.2.1.15
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3 · 1 row entry · 24 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk lacpInfoPortOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::lacpInfoPortOperTable'
The table of LACP port oper information.
lacpInfoPortOperTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1
Oper information about a LACP port.
Column Syntax OID
lacpInfoPortOperIndexThe port identifier.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.1
lacpInfoPortPartOpSysPrioSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.2
lacpInfoPortPartOpSysIdSNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.3
lacpInfoPortPartOpKeySNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.4
lacpInfoPortPartOpPortNumSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.5
lacpInfoPortPartOpPortPrioSNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.6
lacpInfoPortActOpPortStateThe state of Actor Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is s…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.7
lacpInfoPortActOpActivEnumeration
Enumerated Values:
1active
2passive
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.8
lacpInfoPortActOpSyncEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.9
lacpInfoPortActOpDefEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.10
lacpInfoPortActOpTimeoutEnumeration
Enumerated Values:
1short
2long
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.11
lacpInfoPortActOpCollEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.12
lacpInfoPortActOpExpEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.13
lacpInfoPortActOpAggrEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.14
lacpInfoPortActOpDistEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.15
lacpInfoPortPartOpPortStateThe state of Partner Operator Port. This is a octet mask
with the following bits: Activity, Synchronization, Defaulted,
Timeout, Collecting, Expired, Aggregation and Distributing.
If all of them are 0 then the state is…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.16
lacpInfoPortPartOpActivEnumeration
Enumerated Values:
1active
2passive
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.17
lacpInfoPortPartOpSyncEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.18
lacpInfoPortPartOpDefEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.19
lacpInfoPortPartOpTimeoutEnumeration
Enumerated Values:
1short
2long
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.20
lacpInfoPortPartOpCollEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.21
lacpInfoPortPartOpExpEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.22
lacpInfoPortPartOpAggrEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.23
lacpInfoPortPartOpDistEnumeration
Enumerated Values:
1true
2false
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.4.2.3.1.24
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk dot1xInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::dot1xInfoPortTable'
The table of 8021x configuration in the Current_config.
dot1xInfoPortEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1
Information about 8021x Port Config
Column Syntax OID
dot1xInfoPortIndexThe 8021x Port number for which the table is related.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.1
dot1xInfoPortAuthModeAuthentication modeEnumeration
Enumerated Values:
0forceUnauth
1auto
2forceAuth
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.2
dot1xInfoPortAuthStatusAuthentication statusEnumeration
Enumerated Values:
0authorized
1unauthorized
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.3
dot1xInfoPortCtrlDirControlled DirectionsEnumeration
Enumerated Values:
0both
1in
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.4
dot1xInfoPortAuthPAEStateAuthenticator PAE StateEnumeration
Enumerated Values:
0initialize
1disconnected
2connecting
3authenticating
4authenticated
5aborting
6held
7forceauth
8forceunauth
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.5
dot1xInfoPortBackAuthStateBackend authenticator PAE stateEnumeration
Enumerated Values:
0request
1response
2success
3fail
4timeout
5idle
6initialize
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.5.1.1.6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk dot1pInfoPriorityCOSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::dot1pInfoPriorityCOSTable'
The table of current priority to COS queue information.
dot1pInfoPriorityCOSEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1.1
Current information about 8021p priority to COS queue.
Column Syntax OID
dot1pInfoPriorityIndexThe 8021p priority for which the table is related.Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1.1.1
dot1pInfoPriorityCOSQueueThe 8021p priority COSq.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1.1.2
dot1pInfoPriorityCOSWeightThe 8021p priority weight.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.1.1.3
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk dot1pInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::dot1pInfoPortTable'
The table of 8021p port priority configuration 
in the Current_config.
dot1pInfoPortEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1
Information about 8021p Port Priority
Column Syntax OID
dot1pInfoPortIndexThe 8021p Port number for which the table is related.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1.1
dot1pInfoPortPriorityThe 8021p Port number for which the table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1.2
dot1pInfoPortCOSqThe 8021p port COSq.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1.3
dot1pInfoPortWeightThe 8021p port weight.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.6.2.1.4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk vlanInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::vlanInfoTable'
The table of VLAN information.
vlanInfoTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1
Information about a particular VLAN.
Indexes
Column Syntax OID
vlanInfoIdThe VLAN identifier.Integer32
Constraints:
range: 1-4095
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1.1
vlanInfoNameThe VLAN name.OctetString
Constraints:
range: 0-32
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1.2
vlanInfoStatusEnable or disable, VLAN state informationEnumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1.3
vlanInfoPortsThe port list information in the VLAN. The ports are presented
in bitmap format.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| …
OctetString.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.8.1.1.4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk trunkGroupInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::trunkGroupInfoTable'
The table of trunk group information.
trunkGroupInfoTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1
A row in trunk group information table.
Column Syntax OID
trunkGroupInfoIndexThe identifier of the trunk group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.1
trunkGroupInfoStateTrunk group state.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.2
trunkGroupInfoPortsThe port list in the trunk group. The ports are presented in
bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||…
OctetString.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.3
trunkGroupInfoProtocolTrunk group protocol
Static - static trunk group
Lacp - dynamic trunk group
Enumeration
Enumerated Values:
1static
2lacp
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.4
trunkGroupInfoStgsThe stg list the trunk group is in. The stgs are presented in
bitmap format.
OctetString.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.1.1.5
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk trunkGroupInfoPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::trunkGroupInfoPortTable'
The table of Trunk Group Info.
trunkGroupInfoPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2.1
A row in the Trunk Info table.
Column Syntax OID
trunkGroupInfoPortTrunkIdThe Trunk identifier.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2.1.1
trunkGroupInfoPortPortIdThe Port identifier.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2.1.2
trunkGroupInfoPortStatusThe Port Status.Enumeration
Enumerated Values:
0down
1blocking
2forwarding
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.2.3.9.2.1.3
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2 · 1 row entry · 7 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipCurCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipCurCfgIntfTable'
The table of IP interface configuration.
ipCurCfgIntfEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1
A row in the Ip interface table
Column Syntax OID
ipCurCfgIntfIndexThe interface number for which the IP information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.1
ipCurCfgIntfAddrThe IP address of the interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.2
ipCurCfgIntfMaskThe subnet mask of the interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.3
ipCurCfgIntfBroadcastThe broadcast address of the interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.4
ipCurCfgIntfVlanThe VLAN associated with the interface.Integer32
Constraints:
range: 1-4094
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.5
ipCurCfgIntfStateThe state of the interface.Enumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.6
ipCurCfgIntfBootpRelayEnable/disable BOOTP relay.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.2.1.7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3 · 1 row entry · 7 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipNewCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipNewCfgIntfTable'
The table of interface configuration in the New Configuration Block.
ipNewCfgIntfEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1
A row in the Ip interface table
Column Syntax OID
ipNewCfgIntfIndexThe interface number for which the IP information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.1
ipNewCfgIntfAddrThe IP address of the interface.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.2
ipNewCfgIntfMaskThe subnet mask of the interface.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.3
ipNewCfgIntfVlanThe VLAN associated with the interface.Integer32r/w
Constraints:
range: 1-4094
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.5
ipNewCfgIntfStateThe state of the interface.Enumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.6
ipNewCfgIntfDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.7
ipNewCfgIntfBootpRelayEnable/disable BOOTP relay.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.1.3.1.8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipCurCfgGwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipCurCfgGwTable'
The table of gateways  in the Current configuration Block.
ipCurCfgGwEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1
A row in the Ip gateway table
Indexes
Column Syntax OID
ipCurCfgGwIndexThe gateway number for which the information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.1
ipCurCfgGwAddrThe IP address of the default gateway.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.2
ipCurCfgGwIntervalThe interval between ping attempts.Integer32
Constraints:
range: 0-60
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.3
ipCurCfgGwRetryThe number of failed attempts to declare the default gateway DOWN.Integer32
Constraints:
range: 1-120
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.4
ipCurCfgGwStateThe state of the default gateway.Enumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.5
ipCurCfgGwArpThe state of ARP only health checks.Enumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.4.1.6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5 · 1 row entry · 7 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipNewCfgGwTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipNewCfgGwTable'
The table of gateway configuration in the new configuration block.
ipNewCfgGwEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1
A row in the Ip default gateway table
Indexes
Column Syntax OID
ipNewCfgGwIndexThe gateway number for which the information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.1
ipNewCfgGwAddrThe IP address of the default gateway.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.2
ipNewCfgGwIntervalThe interval in seconds between ping attempts.Integer32r/w
Constraints:
range: 0-60
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.3
ipNewCfgGwRetryThe number of failed attempts to declare the default gateway DOWN.Integer32r/w
Constraints:
range: 1-120
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.4
ipNewCfgGwStateThe state of the default gateway.Enumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.5
ipNewCfgGwDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.6
ipNewCfgGwArpThe state of the ARP only health checks.Enumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.2.5.1.7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipCurCfgStaticRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipCurCfgStaticRouteTable'
The table of static routes in the current configuration block.
ipCurCfgStaticRouteEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1
A row in the static IP route table
Column Syntax OID
ipCurCfgStaticRouteIndxThe index of the static routing table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.1
ipCurCfgStaticRouteDestIpThe destination IP address of this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.2
ipCurCfgStaticRouteMaskThe destination IP address of this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.3
ipCurCfgStaticRouteGatewayThe destination IP address of this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.4
ipCurCfgStaticRouteInterfaceThe IP interface of this route. The IP address of the specified
interface shall be use as source IP when performs routing.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.2.1.5
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipNewCfgStaticRouteTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipNewCfgStaticRouteTable'
The table of static routes in the new configuration block.
ipNewCfgStaticRouteEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1
A row in the static IP route table
Column Syntax OID
ipNewCfgStaticRouteIndxThe index of the static routing table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.1
ipNewCfgStaticRouteDestIpThe destination IP address of this route.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.2
ipNewCfgStaticRouteMaskThe subnet mask of this route.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.3
ipNewCfgStaticRouteGatewayThe IP address of the gateway for this route.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.4
ipNewCfgStaticRouteActionWhen set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.5
ipNewCfgStaticRouteInterfaceThe IP interface of this route. The IP address of the specified
interface shall be use as source IP when performs routing.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.3.3.1.6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3 · 1 row entry · 11 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk vrrpCurCfgVirtRtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrTable'
The table of VRRP virtual routers configuration in current_config.
vrrpCurCfgVirtRtrTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1
Information about a VRRP virtual router.
Column Syntax OID
vrrpCurCfgVirtRtrIndxThe VRRP virtual router table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.1
vrrpCurCfgVirtRtrIDThe VRRP virtual router identifier.Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.2
vrrpCurCfgVirtRtrAddrThe VRRP virtual router IP address.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.3
vrrpCurCfgVirtRtrIfIndexThe IfIndex that the VRRP virtual router is representing.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.4
vrrpCurCfgVirtRtrIntervalThe time interval between VRRP advertisements in seconds.
When FAST_ADVERTISEMENT is enabled, this object indicates advertisement
interval in centi-seconds
Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.5
vrrpCurCfgVirtRtrPriorityThe priority value to be used by the specified VRRP virtual routers.Integer32
Constraints:
range: 1-254
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.6
vrrpCurCfgVirtRtrPreemptThis is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.

enabled(1) - allow preemption
disabled(2) - prohibit preemption
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.7
vrrpCurCfgVirtRtrStateEnable or disable the VRRP virtual router.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.8
vrrpCurCfgVirtRtrTckVirtRtrEnable or disable tracking other virtual routers for priority
adjustment. The priority increment is defined
in vrrpCurCfgGenTckVirtRtrInc.
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.10
vrrpCurCfgVirtRtrTckIpIntfEnable or disable tracking other router interfaces for
priority adjustment. The priority increment is defined
in vrrpCurCfgGenTckIpIntfInc.
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.11
vrrpCurCfgVirtRtrTckVlanPortEnable or disable tracking port state of VLAN ports
for priority adjustment. The priority increment is
defined in vrrpCurCfgGenTckVlanPortInc.
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.3.1.12
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4 · 1 row entry · 12 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk vrrpNewCfgVirtRtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrTable'
The table of VRRP virtual routers configuration in current_config.
vrrpNewCfgVirtRtrTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1
Information about a VRRP virtual router.
Column Syntax OID
vrrpNewCfgVirtRtrIndxThe VRRP virtual router table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.1
vrrpNewCfgVirtRtrIDThe VRRP virtual router identifier.Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.2
vrrpNewCfgVirtRtrAddrThe VRRP virtual router IP address.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.3
vrrpNewCfgVirtRtrIfIndexThe IfIndex that the VRRP virtual router is representing.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.4
vrrpNewCfgVirtRtrIntervalThe time interval between VRRP advertisements in seconds.
When FAST_ADVERTISEMENT is enabled, this object indicates advertisement
interval in centi-seconds
Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.5
vrrpNewCfgVirtRtrPriorityThe priority value to be used by the specified VRRP virtual router.Integer32r/w
Constraints:
range: 1-254
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.6
vrrpNewCfgVirtRtrPreemptThis is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.

enabled(1) - allow preemption
disabled(2) - prohibit preemption
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.7
vrrpNewCfgVirtRtrStateEnable or disable the VRRP virtual router.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.8
vrrpNewCfgVirtRtrDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.9
vrrpNewCfgVirtRtrTckVirtRtrEnable or disable tracking other virtual routers for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckVirtRtrInc.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.11
vrrpNewCfgVirtRtrTckIpIntfEnable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckIpIntfInc.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.12
vrrpNewCfgVirtRtrTckVlanPortEnable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpNewCfgGenTckVlanPortInc.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.4.1.13
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk vrrpCurCfgIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::vrrpCurCfgIfTable'
The table of VRRP interface configuration in current_config.
vrrpCurCfgIfTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6.1
Information about a VRRP interface.
Column Syntax OID
vrrpCurCfgIfIndxThe VRRP interface index. This is eqivalent to IfIndex.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6.1.1
vrrpCurCfgIfAuthTypeType of authentication being used.
none(1) - no authentication
simple-text-password(2) - use password specified in
vrrpCurCfgIfPasswd for authentication.
Enumeration
Enumerated Values:
1none
2simple-text-password
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6.1.2
vrrpCurCfgIfPasswdThe password for authentication.OctetString
Constraints:
range: 0-8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.6.1.3
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk vrrpNewCfgIfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::vrrpNewCfgIfTable'
The table of VRRP interface configuration in current_config.
vrrpNewCfgIfTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1
Information about a VRRP interface.
Column Syntax OID
vrrpNewCfgIfIndxThe VRRP interface index. This is eqivalent to IfIndex.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1.1
vrrpNewCfgIfAuthTypeType of authentication being used.
none(1) - no authentication
simple-text-password(2) - use password specified in
vrrpNewCfgIfPasswd for authentication.
Enumerationr/w
Enumerated Values:
1none
2simple-text-password
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1.2
vrrpNewCfgIfPasswdThe password for authentication.OctetStringr/w
Constraints:
range: 0-8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1.3
vrrpNewCfgIfDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.7.1.4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9 · 1 row entry · 9 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk vrrpCurCfgVirtRtrGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::vrrpCurCfgVirtRtrGrpTable'
The table of VRRP virtual router group in current_config.
vrrpCurCfgVirtRtrGrpTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1
Information about a VRRP failover virtual router.
Column Syntax OID
vrrpCurCfgVirtRtrGrpIndxThe VRRP virtual router table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.1
vrrpCurCfgVirtRtrGrpIDThe VRRP virtual router identifier.Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.2
vrrpCurCfgVirtRtrGrpIfIndexThe IfIndex that the VRRP virtual router is representing.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.3
vrrpCurCfgVirtRtrGrpIntervalThe time interval between VRRP advertisements in seconds.Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.4
vrrpCurCfgVirtRtrGrpPriorityThe priority value to be used by the specified VRRP virtual routers.Integer32
Constraints:
range: 1-254
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.5
vrrpCurCfgVirtRtrGrpPreemptThis is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.

enabled(1) - allow preemption
disabled(2) - prohibit preemption
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.6
vrrpCurCfgVirtRtrGrpStateEnable or disable the VRRP virtual router.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.7
vrrpCurCfgVirtRtrGrpTckIpIntfEnable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpCurCfgGenTckIpIntfInc.
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.10
vrrpCurCfgVirtRtrGrpTckVlanPortEnable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpCurCfgGenTckVlanPortInc.
Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.9.1.11
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10 · 1 row entry · 10 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk vrrpNewCfgVirtRtrGrpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::vrrpNewCfgVirtRtrGrpTable'
The table of VRRP virtual router group configuration in new_config.
vrrpNewCfgVirtRtrGrpTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1
Information about a VRRP failover virtual router.
Column Syntax OID
vrrpNewCfgVirtRtrGrpIndxThe VRRP virtual router table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.1
vrrpNewCfgVirtRtrGrpIDThe VRRP virtual router identifier.Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.2
vrrpNewCfgVirtRtrGrpIfIndexThe IfIndex that the VRRP virtual router is representing.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.3
vrrpNewCfgVirtRtrGrpIntervalThe time interval between VRRP advertisements in seconds.Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.4
vrrpNewCfgVirtRtrGrpPriorityThe priority value to be used by the specified VRRP virtual router.Integer32r/w
Constraints:
range: 1-254
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.5
vrrpNewCfgVirtRtrGrpPreemptThis is for controlling whether a higher priority Backup
VRRP virtual router preempts a low priority Master.

enabled(1) - allow preemption
disabled(2) - prohibit preemption
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.6
vrrpNewCfgVirtRtrGrpStateEnable or disable the VRRP virtual router.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.7
vrrpNewCfgVirtRtrGrpDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than delete(2) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.8
vrrpNewCfgVirtRtrGrpTckIpIntfEnable or disable tracking other router interfaces for
priority adjustment. the priority increment is defined
in vrrpNewCfgGenTckIpIntfInc.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.11
vrrpNewCfgVirtRtrGrpTckVlanPortEnable or disable tracking port state of VLAN ports
for priority adjustment. the priority increment is
defined in vrrpNewCfgGenTckVlanPortInc.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.6.10.1.12
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipCurCfgStaticArpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipCurCfgStaticArpTable'
The table of static ARPs in the current configuration block.
ipCurCfgStaticArpEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1
A row in the static ARP table
Column Syntax OID
ipCurCfgStaticArpIndxThe index of the static ARP table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.1
ipCurCfgStaticArpIpThe IP address for the ARP entry.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.2
ipCurCfgStaticArpMACThe MAC address for the ARP entry.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.3
ipCurCfgStaticArpVlanThe VLAN for the ARP entry.Integer32
Constraints:
range: 1-4095
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.4
ipCurCfgStaticArpPortThe port for the ARP entry.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.4.1.5
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipNewCfgStaticArpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipNewCfgStaticArpTable'
The table of static ARPs in the new configuration block.
ipNewCfgStaticArpEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1
A row in the static ARP table
Column Syntax OID
ipNewCfgStaticArpIndxThe index of the static ARP table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.1
ipNewCfgStaticArpIpThe IP address for the ARP entry.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.2
ipNewCfgStaticArpMACThe MAC address for the ARP entry.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.3
ipNewCfgStaticArpVlanThe VLAN for the ARP entry.Integer32r/w
Constraints:
range: 1-4095
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.4
ipNewCfgStaticArpPortThe port for the ARP entry.PortNumberr/w.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.5
ipNewCfgStaticArpActionWhen set to the value of 2 (delete), the entire row is deleted.
When read, other is returned. Setting the value to anything other
than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.7.5.1.6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipCurCfgNwfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipCurCfgNwfTable'
The table of IP network filter configuration in the current_config.
ipCurCfgNwfEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1
Information about an IP network filter.
Column Syntax OID
ipCurCfgNwfIndexThe netowrk filter number for which the NWF is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1.1
ipCurCfgNwfAddrThe IP address of the network filter.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1.2
ipCurCfgNwfMaskThe IP network filter mask.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1.3
ipCurCfgNwfStateEnable or disable the network filter.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.2.1.4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipNewCfgNwfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipNewCfgNwfTable'
The table of IP network filter configuration in the current_config.
ipNewCfgNwfEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1
Information about an IP network filter.
Column Syntax OID
ipNewCfgNwfIndexThe netowrk filter number for which the NWF is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.1
ipNewCfgNwfAddrThe IP address of the network filter.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.2
ipNewCfgNwfMaskThe IP network filter mask.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.3
ipNewCfgNwfStateEnable or disable the network filter.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.4
ipNewCfgNwfDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.10.3.1.5
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipCurCfgRmapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipCurCfgRmapTable'
The table of IP route map configuration in the current_config.
ipCurCfgRmapEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1
Information about an IP route map.
Column Syntax OID
ipCurCfgRmapIndexThe route map number for which the RMAP is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.1
ipCurCfgRmapMetricThe metric of the route map. 4294967295 means noneUnsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.3
ipCurCfgRmapPrecThe precedence of the route map.Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.4
ipCurCfgRmapStateEnable or disable the route map.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.6
ipCurCfgRmapMetricTypeThe OSPF metric-type of the matched route.Enumeration
Enumerated Values:
1none
2type1
3type2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.2.1.8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipNewCfgRmapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipNewCfgRmapTable'
The table of IP route map configuration in the current_config.
ipNewCfgRmapEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1
Information about an IP route map.
Column Syntax OID
ipNewCfgRmapIndexThe route map number for which the RMAP is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.1
ipNewCfgRmapMetricThe metric of the route map. 16777215 means noneUnsigned32r/w
Constraints:
range: 0-16777215
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.3
ipNewCfgRmapPrecThe precedence of the route map.Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.4
ipNewCfgRmapStateEnable or disable the route map.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.6
ipNewCfgRmapMetricTypeThe OSPF metric-type of the matched route.Enumerationr/w
Enumerated Values:
1none
2type1
3type2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.8
ipNewCfgRmapDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.3.1.9
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipCurCfgAlistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipCurCfgAlistTable'
The table of IP route map access list configuration in the 
current_config.
ipCurCfgAlistEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1
Information about an IP route map.
Column Syntax OID
ipCurCfgAlistRmapIndexThe route map number for which the RMAP is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.1
ipCurCfgAlistIndexThe access list number for which the access list is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.2
ipCurCfgAlistNwfThe network filter number of the route map access list.
0 means none
Integer32
Constraints:
range: 0-256
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.3
ipCurCfgAlistMetricThe metric of the route map access list. 4294967295 means noneUnsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.4
ipCurCfgAlistActionAction of the route map access list.Enumeration
Enumerated Values:
1permit
2deny
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.5
ipCurCfgAlistStateEnable or disable the route map access list.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.5.1.6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6 · 1 row entry · 7 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipNewCfgAlistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipNewCfgAlistTable'
The table of IP route map access list configuration in the 
current_config.
ipNewCfgAlistEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1
Information about an IP route map.
Column Syntax OID
ipNewCfgAlistRmapIndexThe route map number for which the RMAP is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.1
ipNewCfgAlistIndexThe access list number for which the access list is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.2
ipNewCfgAlistNwfThe network filter number of the route map access list.
0 means none
Integer32r/w
Constraints:
range: 1-256
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.3
ipNewCfgAlistMetricThe metric of the route map access list. 16777215 means noneUnsigned32r/w
Constraints:
range: 1-16777215
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.4
ipNewCfgAlistActionAction of the route map access list.Enumerationr/w
Enumerated Values:
1permit
2deny
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.5
ipNewCfgAlistStateEnable or disable the route map access list.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.6
ipNewCfgAlistDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.11.6.1.7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2 · 1 row entry · 7 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfCurCfgAreaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfCurCfgAreaTable'
The table of OSPF Area configuration in the current_config.
ospfCurCfgAreaEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1
Information about a OSPF area.
Column Syntax OID
ospfCurCfgAreaIndexThe OSPF area number for which the OSPF area table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.1
ospfCurCfgAreaIdThe IP Address of the OSPF area.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.2
ospfCurCfgAreaSpfIntervalThe SPF interval for the OSPF area.Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.3
ospfCurCfgAreaAuthTypeType of authentication being used.
none(1) - no authentication
password(2) - use password
md5(3) - use MD5 authentication.
Enumeration
Enumerated Values:
1none
2password
3md5
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.4
ospfCurCfgAreaTypeType of Area.
transit(0)
stub(1)
nssa(2)
Enumeration
Enumerated Values:
0transit
1stub
2nssa
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.5
ospfCurCfgAreaMetricMetric (1-65535)Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.6
ospfCurCfgAreaStatusStatus
disabled(0)
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.2.1.7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3 · 1 row entry · 8 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfNewCfgAreaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfNewCfgAreaTable'
The table of OSPF Area configuration in the new_config.
ospfNewCfgAreaEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1
Information about a OSPF area.
Column Syntax OID
ospfNewCfgAreaIndexThe OSPF area number for which the OSPF area table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.1
ospfNewCfgAreaIdThe IP Address of the OSPF area.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.2
ospfNewCfgAreaSpfIntervalThe SPF interval for the OSPF area.Integer32r/w
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.3
ospfNewCfgAreaAuthTypeType of authentication being used.
none(1) - no authentication
password(2) - use password.
md5(3) - use MD5 authentication.
Enumerationr/w
Enumerated Values:
1none
2password
3md5
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.4
ospfNewCfgAreaTypeType of Area.
transit(0)
stub(1)
nssa(2)
Enumerationr/w
Enumerated Values:
0transit
1stub
2nssa
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.5
ospfNewCfgAreaMetricMetric (1-65535)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.6
ospfNewCfgAreaStatusStatus
disabled(0)
enabled(1)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.7
ospfNewCfgAreaDeleteDelete the area
no(0),
yes(1)
Enumerationr/w
Enumerated Values:
0no
1yes
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.3.1.8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.5 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfCurCfgMdkeyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfCurCfgMdkeyTable'
The table of OSPF MD5 keys in the current_config.
ospfCurCfgMdkeyEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.5.1
Information about an OSPF MD keys table.
Column Syntax OID
ospfCurCfgMdkeyIndexThe OSPF MD5 Key number for which the OSPF MdKey table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.5.1.1
ospfCurCfgMdkeyKeyThe character string representing the MD5 Key.OctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.5.1.2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfNewCfgMdkeyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfNewCfgMdkeyTable'
The table of OSPF MD5 keys in the new_config.
ospfNewCfgMdkeyEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6.1
Information about an OSPF MD keys table.
Column Syntax OID
ospfNewCfgMdkeyIndexThe OSPF MD5 Key number for which the OSPF MdKey table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6.1.1
ospfNewCfgMdkeyKeyThe character string representing the MD5 Key.OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6.1.2
ospfNewCfgMdkeyDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.6.1.3
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7 · 1 row entry · 12 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfCurCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfCurCfgIntfTable'
The table of OSPF Interface configuration in the current_config.
ospfCurCfgIntfEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1
Information about an OSPF Interface.
Column Syntax OID
ospfCurCfgIntfIndexThe OSPF Interface number for which the OSPF Interface table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.1
ospfCurCfgIntfIdThe IP Address of the OSPF interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.2
ospfCurCfgIntfAreaThe index of the area that the interface belongsInteger32
Constraints:
range: 0-2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.3
ospfCurCfgIntfMdkeyThe MD5 key for the OSPF interface
0 (none) no MD5 authentication.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.4
ospfCurCfgIntfCostInterface costInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.5
ospfCurCfgIntfPrioInterface router priorityInteger32
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.6
ospfCurCfgIntfHelloHello intervalInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.7
ospfCurCfgIntfDeadDead intervalInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.9
ospfCurCfgIntfTransTransit delayInteger32
Constraints:
range: 1-3600
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.11
ospfCurCfgIntfRetraRetransmit intervalInteger32
Constraints:
range: 1-3600
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.12
ospfCurCfgIntfAuthKeyAuthentication KeyOctetString
Constraints:
range: 0-8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.13
ospfCurCfgIntfStatusStatus of the interface
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.7.1.15
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8 · 1 row entry · 13 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfNewCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfNewCfgIntfTable'
The table of OSPF Interface configuration in the new_config.
ospfNewCfgIntfEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1
Information about an OSPF Interface.
Column Syntax OID
ospfNewCfgIntfIndexThe OSPF Interface number for which the OSPF Interface table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.1
ospfNewCfgIntfIdThe IP Address of the OSPF interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.2
ospfNewCfgIntfAreaThe index of the area that the interface belongs (0..2)Integer32r/w
Constraints:
range: 0-2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.3
ospfNewCfgIntfMdkeyThe MD5 key for the OSPF interface
0 (none) no MD5 authentication.
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.4
ospfNewCfgIntfCostInterface cost(1..65535)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.5
ospfNewCfgIntfPrioInterface router priority(0..255)Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.6
ospfNewCfgIntfHelloHello interval(1..65535)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.7
ospfNewCfgIntfDeadDead interval(1..65535)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.9
ospfNewCfgIntfTransTransit delay(1..3600)Integer32r/w
Constraints:
range: 1-3600
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.11
ospfNewCfgIntfRetraRetransmit interval(1..3600)Integer32r/w
Constraints:
range: 1-3600
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.12
ospfNewCfgIntfAuthKeyAuthentication KeyOctetStringr/w
Constraints:
range: 0-8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.13
ospfNewCfgIntfStatusStatus of the interface
disabled(0),
enabled(1)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.15
ospfNewCfgIntfDeleteDelete the interface
other(0),
delete(1)
Enumerationr/w
Enumerated Values:
0other
1delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.8.1.16
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9 · 1 row entry · 10 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfCurCfgVirtIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfCurCfgVirtIntfTable'
The table of OSPF Virtual Interface configuration in the current_config.
ospfCurCfgVirtIntfEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1
Information about an OSPF virtual Interface.
Column Syntax OID
ospfCurCfgVirtIntfIndexThe OSPF Virtual Interface number for which the OSPF
Virtual Interface table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.1
ospfCurCfgVirtIntfAreaIdThe index of the OSPF area to which this virtual interface
belongs.
Integer32
Constraints:
range: 0-2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.2
ospfCurCfgVirtIntfNbrThe IP Address of the OSPF neighbor for this virtual interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.3
ospfCurCfgVirtIntfMdkeyThe MD5 key for the OSPF virtual interface
0 (none) no MD5 authentication.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.4
ospfCurCfgVirtIntfHelloHello intervalInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.5
ospfCurCfgVirtIntfDeadDead intervalInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.7
ospfCurCfgVirtIntfTransTransit delayInteger32
Constraints:
range: 1-3600
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.9
ospfCurCfgVirtIntfRetraRetransmit intervalInteger32
Constraints:
range: 1-3600
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.10
ospfCurCfgVirtIntfAuthKeyAuthentication KeyOctetString
Constraints:
range: 0-8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.11
ospfCurCfgVirtIntfStatusStatus
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.9.1.12
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10 · 1 row entry · 11 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfNewCfgVirtIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfNewCfgVirtIntfTable'
The table of OSPF Virtual Interface configuration in the new_config.
ospfNewCfgVirtIntfEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1
Information about an OSPF virtual Interface.
Column Syntax OID
ospfNewCfgVirtIntfIndexThe OSPF Virtual Interface number for which the OSPF
Virtual Interface table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.1
ospfNewCfgVirtIntfAreaIdThe index of the OSPF area to which this virtual interface
belongs.
Integer32r/w
Constraints:
range: 0-2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.2
ospfNewCfgVirtIntfNbrThe IP Address of the OSPF neighbor for this virtual interface.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.3
ospfNewCfgVirtIntfMdkeyThe MD5 key for the OSPF virtual interface
0 (none) no MD5 authentication.
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.4
ospfNewCfgVirtIntfHelloHello interval(1..65535)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.5
ospfNewCfgVirtIntfDeadDead interval(1..65535)Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.7
ospfNewCfgVirtIntfTransTransit dela(1..3600)yInteger32r/w
Constraints:
range: 1-3600
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.9
ospfNewCfgVirtIntfRetraRetransmit interval(1..3600)Integer32r/w
Constraints:
range: 1-3600
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.10
ospfNewCfgVirtIntfAuthKeyAuthentication Key SIZE(0..8)OctetStringr/w
Constraints:
range: 0-8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.11
ospfNewCfgVirtIntfStatusStatus
disabled(0),
enabled(1)
Enumerationr/w
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.12
ospfNewCfgVirtIntfDeleteDelete
other(0),
delete(1)
Enumerationr/w
Enumerated Values:
0other
1delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.10.1.13
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfCurCfgHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfCurCfgHostTable'
The table of OSPF Host configuration.
ospfCurCfgHostEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1
Information about a OSPF host.
Column Syntax OID
ospfCurCfgHostIndexThe OSPF host number for which the OSPF host table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.1
ospfCurCfgHostIpAddrThe IP Address of the OSPF host.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.2
ospfCurCfgHostAreaIndexThe area index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.3
ospfCurCfgHostCostThe cost of the OSPF host.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.4
ospfCurCfgHostStateEnable or disable an OSPF HostEnumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.12.1.5
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfNewCfgHostTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfNewCfgHostTable'
The table of OSPF Host configuration.
ospfNewCfgHostEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1
Information about a OSPF host.
Column Syntax OID
ospfNewCfgHostIndexThe OSPF host number for which the OSPF host table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.1
ospfNewCfgHostIpAddrThe IP Address of the OSPF host.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.2
ospfNewCfgHostAreaIndexThe OSPF area index.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.3
ospfNewCfgHostCostThe cost of the OSPF host.Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.4
ospfNewCfgHostStateEnable or disable an OSPF HostEnumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.5
ospfNewCfgHostDeleteDelete the OSPF host:
no(0),
yes(1)
Enumerationr/w
Enumerated Values:
0no
1yes
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.13.1.6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfCurCfgRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfCurCfgRangeTable'
The table of OSPF summary range in the current configuration.
ospfCurCfgRangeEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1
Information about an OSPF summary range.
Column Syntax OID
ospfCurCfgRangeIndexThe range number for which the OSPF summary range table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.1
ospfCurCfgRangeAddrThe IP Address of the range.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.2
ospfCurCfgRangeMaskThe mask of the range.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.3
ospfCurCfgRangeAreaIndexThe area index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.4
ospfCurCfgRangeHideStateThe state of the hide range.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.5
ospfCurCfgRangeStateThe state of the range.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.14.1.6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15 · 1 row entry · 7 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfNewCfgRangeTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfNewCfgRangeTable'
The table of OSPF summary range in the new configuration.
ospfNewCfgRangeEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1
Information about an OSPF summary range.
Column Syntax OID
ospfNewCfgRangeIndexThe range number for which the OSPF summary range table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.1
ospfNewCfgRangeAddrThe IP Address of the range.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.2
ospfNewCfgRangeMaskThe mask of the range.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.3
ospfNewCfgRangeAreaIndexThe area index.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.4
ospfNewCfgRangeHideStateThe state of the hide range.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.5
ospfNewCfgRangeStateThe state of the range.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.6
ospfNewCfgRangeDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.13.15.1.7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk igmpStaticMrtrCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::igmpStaticMrtrCurCfgTable'
The IGMP Static Multicast Router table in the current configuration block.
igmpStaticMrtrCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1
A row in the Static Multicast Router table.
Column Syntax OID
igmpStaticMrtrCurCfgIndxThe IGMP Multicast Router table port index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1.1
igmpStaticMrtrCurCfgPortIdThe IGMP Multicast Router port in the current configuration block.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1.2
igmpStaticMrtrCurCfgVlanIdThe IGMP Multicast Router port in the current configuration block.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1.3
igmpStaticMrtrCurCfgVersionThe IGMP version of the IGMP Static Multicast Router.Enumeration
Enumerated Values:
1version1
2version2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.1.1.4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk igmpStaticMrtrNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::igmpStaticMrtrNewCfgTable'
The IGMP Static Multicast Router table in the new configuration block.
igmpStaticMrtrNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1
A row in the Static Multicast Router table.
Column Syntax OID
igmpStaticMrtrNewCfgIndxThe IGMP Multicast Router table port index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.1
igmpStaticMrtrNewCfgPortIdThe IGMP Multicast Router port in the new configuration block.PortNumberr/w.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.2
igmpStaticMrtrNewCfgVlanIdThe IGMP Multicast Router port in the new configuration block.SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.3
igmpStaticMrtrNewCfgVersionThe IGMP version of the IGMP Static Multicast Router.Enumerationr/w
Enumerated Values:
1version1
2version2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.4
igmpStaticMrtrNewCfgDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.4.2.1.5
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk igmpFltCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::igmpFltCurCfgTable'
The IGMP filtering table in the current configuration block.
igmpFltCurCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1
A row in the filtering table.
Column Syntax OID
igmpFltCurCfgIndxThe IGMP filter table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.1
igmpFltCurCfgMcastIp1Range1 Multicast IP address to be filtered.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.2
igmpFltCurCfgMcastIp2Range2 Multicast IP address to be filtered.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.3
igmpFltCurCfgActionThe action for the IGMP filtering rule.Enumeration
Enumerated Values:
1allow
2deny
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.4
igmpFltCurCfgStateThe state of this IGMP filtering rule.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.1.1.5
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk igmpFltNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::igmpFltNewCfgTable'
The IGMP filtering table in the current configuration block.
igmpFltNewCfgTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1
A row in the filtering table.
Column Syntax OID
igmpFltNewCfgIndxThe IGMP filter table index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.1
igmpFltNewCfgMcastIp1Range1 Multicast source IP address to be filtered.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.2
igmpFltNewCfgMcastIp2Range2 Multicast source IP address to be filtered.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.3
igmpFltNewCfgActionThe action for the IGMP filtering rule.Enumerationr/w
Enumerated Values:
1allow
2deny
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.4
igmpFltNewCfgStateThe state of this IGMP filtering rule.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.5
igmpFltNewCfgDeleteWhen set to the value of 2 (delete), the entire row is deleted.
When read, other(1) is returned. Setting the value to anything
other than 2(delete) has no effect on the state of the row.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.2.1.6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk igmpFltCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::igmpFltCurCfgPortTable'
The IGMP filtering port table in the current configuration block.
igmpFltCurCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3.1
A row in the IGMP filtering port table.
Column Syntax OID
igmpFltCurCfgPortIndxThe port index.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3.1.1
igmpFltCurCfgPortStateEnable or disable IGMP filtering.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3.1.2
igmpFltCurCfgPortFiltBmapThe IGMP filtering rules applied to the port. The filtering rules are
presented in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| …
OctetString
Constraints:
range: 0-256
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.3.1.3
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk igmpFltNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::igmpFltNewCfgPortTable'
The IGMP filtering port table in the new configuration block.
igmpFltNewCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1
A row in the IGMP filtering port table.
Column Syntax OID
igmpFltNewCfgPortIndxThe port index.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.1
igmpFltNewCfgPortStateEnable or disable IGMP filtering.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.2
igmpFltNewCfgPortFiltBmapThe IGMP filtering rules applied to the port. The filtering rules
are presented in bitmap format.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| ||…
OctetString
Constraints:
range: 0-256
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.3
igmpFltNewCfgPortAddFiltRuleThis is an action object to add filtering rule to a port. The value
specified with this object is the index to the fltNewCfgTable for
which filtering rule to be added to the port. The range of the
valid index is betw…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.4
igmpFltNewCfgPortRemFiltRuleThis is an action object to remove filtering rule from a port. The
value specified with this object is the index to the fltNewCfgTable
for which filtering rule to be removed from the port. The range of
the valid inde…
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.15.5.4.1.5
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1 · 1 row entry · 13 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ripCurCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ripCurCfgIntfTable'
The table of RIP on IP interface configuration in the current_config.
ripCurCfgIntfEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1
Information about RIP on IP interface.
Column Syntax OID
ripCurCfgIntfIndexThe interface number for which the RIP information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.1
ripCurCfgIntfVersionRIP version.Enumeration
Enumerated Values:
1ripVersion1
2ripVersion2
3ripVersionBoth
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.2
ripCurCfgIntfSupplyEnable or disable supplying route updates.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.3
ripCurCfgIntfListenEnable or disable listening to route updates.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.4
ripCurCfgIntfDefaultSpecifies what RIP does with default routes.Enumeration
Enumerated Values:
1both
2listen
3supply
4none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.5
ripCurCfgIntfTrigUpdateEnable or disable tirggered updates.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.6
ripCurCfgIntfMcastUpdateEnable or disable multicast updates.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.7
ripCurCfgIntfPoisonReverseRIP poison reverse.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.8
ripCurCfgIntfStateEnable or disable RIP protocol.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.9
ripCurCfgIntfMetricRIP route metric for this interface.Integer32
Constraints:
range: 1-16
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.10
ripCurCfgIntfAuthEnable or disable RIP update authorization with a
simple plain text password.
Enumeration
Enumerated Values:
1none
2password
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.11
ripCurCfgIntfKeyRIP update authentication password.OctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.12
ripCurCfgIntfSplitHorizonRIP split horizon.Enumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.1.1.13
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2 · 1 row entry · 13 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ripNewCfgIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ripNewCfgIntfTable'
The table of RIP on IP interface configuration in the new_config.
ripNewCfgIntfEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1
Information about RIP on IP interface.
Column Syntax OID
ripNewCfgIntfIndexThe interface number for which the RIP information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.1
ripNewCfgIntfVersionRIP version.Enumerationr/w
Enumerated Values:
1ripVersion1
2ripVersion2
3ripVersionBoth
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.2
ripNewCfgIntfSupplyEnable or disable supplying route updates.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.3
ripNewCfgIntfListenEnable or disable listening to route updates.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.4
ripNewCfgIntfDefaultSpecifies what RIP does with default routes. The default routes
action could be set to listen/supply/both/none.
Enumerationr/w
Enumerated Values:
1both
2listen
3supply
4none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.5
ripNewCfgIntfTrigUpdateEnable or disable tirggered updates.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.6
ripNewCfgIntfMcastUpdateEnable or disable multicast updates.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.7
ripNewCfgIntfPoisonReverseRIP poison reverse.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.8
ripNewCfgIntfStateEnable or disable RIP protocol.Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.9
ripNewCfgIntfMetricRIP route metric for this interface.Integer32r/w
Constraints:
range: 1-15
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.10
ripNewCfgIntfAuthEnable or disable RIP update authorization with a
simple plain text password.
Enumerationr/w
Enumerated Values:
1none
2password
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.11
ripNewCfgIntfKeyRIP update authentication password.OctetStringr/w
Constraints:
range: 0-16
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.12
ripNewCfgIntfSplitHorizonRIP split horizon.Enumerationr/w
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.1.18.2.1.13
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1 · 1 row entry · 13 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfAreaRxTxStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfAreaRxTxStats'
The table of OSPF Area Rx/Tx Statistics.
ospfAreaRxTxStatsEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1
Rx Tx packet Statistics about a OSPF area.
Column Syntax OID
ospfAreaRxTxIndexThe index of the ospf Area for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.1
ospfAreaRxPktsThe total number of OSPF packets received in this OSPF area.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.2
ospfAreaTxPktsThe total number of OSPF packets transmitted in this OSPF area.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.3
ospfAreaRxHelloThe total number of Hello packets received in this OSPF area.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.4
ospfAreaTxHelloThe total number of Hello packets transmitted in this OSPF
area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.5
ospfAreaRxDatabaseThe total number of Database Description packets transmitted
for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.6
ospfAreaTxDatabaseThe total number of Database Description packets transmitted
for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.7
ospfAreaRxlsReqsThe total number of Link State Request packets received for
this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.8
ospfAreaTxlsReqsThe total number of Link State Request packets transmitted for
this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.9
ospfAreaRxlsAcksThe total number of Link State Acknowledgement packets received for
this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.10
ospfAreaTxlsAcksThe total number of Link State Acknowledgement packets transmitted
for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.11
ospfAreaRxlsUpdatesThe total number of Link State Update packets received for
this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.12
ospfAreaTxlsUpdatesThe total number of Link State Update packets transmitted for
this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.1.1.13
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2 · 1 row entry · 13 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfAreaNbrChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfAreaNbrChangeStats'
The table of OSPF Area Neighbour Statistics.
ospfAreaNbrChangeStatsEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1
Area Neighbour Change Statistics about a OSPF area.
Column Syntax OID
ospfAreaNbrIndexThe index of the ospf Area for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.1
ospfAreaNbrhelloThe total number of Hello packets received from neighbours
in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.2
ospfAreaNbrStartThe total number of neighbours in this state (i.e. an indication
that Hello packets should now be sent to the neighbour at intervals
of HelloInterval seconds.) in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.3
ospfAreaNbrAdjointOkThe total number of decisions to be made (again) as to whether
an adjacency should be established/maintained with the neighbour.
for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.4
ospfAreaNbrNegotiationDoneThe total number of neighbours in this state wherein the
Master/slave relationship has been negotiated, and sequence
numbers have been exchanged, for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.5
ospfAreaNbrExchangeDoneThe total number of neighbours in this state (i.e. in an
adjacency's final state) having transimitted a full sequence
of Database Description packets, for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.6
ospfAreaNbrBadRequestsThe sum total number of Link State Requests which have been received
for a link state advertisement not contained in the database across
this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.7
ospfAreaNbrBadSequenceThe total number of Database Description packets which have been
received that either
a) has an unexpected DD sequence number
b) Unexpectedly has the init bit set
c) Has an options field differing from the last Options…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.8
ospfAreaNbrLoadingDoneThe total number of link state updates received for all
out-of-date portions of the database in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.9
ospfAreaNbrN1wayThe total number of Hello packets received from neighbours, in
which this router is not mentioned in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.10
ospfAreaNbrRstAdThe total number of times the Neighbour adjacency has been reset
across this OPSF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.11
ospfAreaNbrDownThe total number of Neighbouring routers down (i.e. in the initial
state of a neighbour conversation.) in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.12
ospfAreaNbrN2wayThe total number of Hello packets received from neighbours, in
which this router is mentioned in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.2.1.13
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3 · 1 row entry · 8 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfAreaChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfAreaChangeStats'
The table of OSPF Area Change Statistics.
ospfAreaChangeStatsEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1
Area Change Statistics about a OSPF area.
Column Syntax OID
ospfAreaIntfIndexThe index of the OSPF Area for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.1
ospfAreaIntfHelloThe total number of Hello packets sent on this OSPF area.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.2
ospfAreaIntfDownThe total number of interfaces down in this OSPF area.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.3
ospfAreaIntfLoopThe total number of interfaces no longer connected to
the attatched network in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.4
ospfAreaIntfUnloopThe total number of interfaces connected to the attatched
network in this OSPF area..
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.5
ospfAreaIntfWaitTimerThe total number of times the Wait Timer has been fired,
(indicating the end of the waiting period that is required
before electing a (Backup) Designated Router) for this
OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.6
ospfAreaIntfBackupThe total number of Backup Designated Routers on the attatched
network for this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.7
ospfAreaIntfNbrChangeThe total number of changes in the set of bidirectional neighbours
associated with the interface in this OSPF area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.3.1.8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4 · 1 row entry · 8 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfAreaErrorStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfAreaErrorStats'
The table of OSPF Area Error Statistics.
ospfAreaErrorStatsEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1
Error Statistics for an OSPF area.
Column Syntax OID
ospfAreaErrIndexThe index of the OSPF Area for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.1
ospfAreaErrAuthFailureThe total number of packets received with a wrong password in
this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.2
ospfAreaErrNetmaskMismatchThe total number of packets received with a wrong netmask in
this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.3
ospfAreaErrHelloMismatchThe total number of packets received with a different hello interval
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.4
ospfAreaErrDeadMismatchThe total number of packets received with a different dead interval
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.5
ospfAreaErrOptionsMismatchThe total number of packets received with a different options
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.6
ospfAreaErrUnknownNbrThe total number of packets received from an unknown neighbor
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.7
ospfAreaErrAreaMismatchThe total number of packets received with a wrong area.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.2.4.1.8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1 · 1 row entry · 13 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfIntfRxTxStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfIntfRxTxStats'
The table of OSPF Interface Rx/Tx packet Statistics.
ospfIntfRxTxStatsEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1
OSPF interface Rx/Tx packet statistics.
Column Syntax OID
ospfIntfRxTxIndexThe OSPF interface for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.1
ospfIntfRxPktsThe total number of OSPF packets received for this OSPF interface.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.2
ospfIntfTxPktsThe total number of OSPF packets transmitted for this OSPF interface.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.3
ospfIntfRxHelloThe total number of Hello packets received
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.4
ospfIntfTxHelloThe total number of Hello packets transmitted
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.5
ospfIntfRxDatabaseThe total number of Database Description packets received
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.6
ospfIntfTxDatabaseThe total number of Database Description packets transmitted
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.7
ospfIntfRxlsReqsThe total number of Link State Request packets received
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.8
ospfIntfTxlsReqsThe total number of Link State Request packets transmitted
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.9
ospfIntfRxlsAcksThe total number of Link State Acknowledgement packets received
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.10
ospfIntfTxlsAcksThe total number of Link State Acknowledgement packets transmitted
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.11
ospfIntfRxlsUpdatesThe total number of Link State Update packets received for
this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.12
ospfIntfTxlsUpdatesThe total number of Link State Update packets transmitted for
this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.1.1.13
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2 · 1 row entry · 13 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfIntfNbrChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfIntfNbrChangeStats'
The table of OSPF Interface Neighbour change Statistics.
ospfIntfNbrChangeStatsEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1
OSPF interface Neighbour Change statistics.
Column Syntax OID
ospfIntfNbrIndexThe index of the OSPF Interface for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.1
ospfIntfNbrhelloThe total number of Hello packets received from neighbours
in this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.2
ospfIntfNbrStartThe total number of neighbours in this state (i.e. an indication
that Hello packets should now be sent to the neighbour at intervals
of HelloInterval seconds.) in this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.3
ospfIntfNbrAdjointOkThe total number of decisions to be made (again) as to whether
an adjacency should be established/maintained with the neighbour.
for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.4
ospfIntfNbrNegotiationDoneThe total number of neighbours in this state wherein the
Master/slave relationship has been negotiated, and sequence
numbers have been exchanged, for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.5
ospfIntfNbrExchangeDoneThe total number of neighbours in this state (i.e. in an
adjacency's final state) having transimitted a full sequence
of Database Description packets, for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.6
ospfIntfNbrBadRequestsThe total number of Link State Requests which have been received
for a link state advertisement not contained in the database for
this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.7
ospfIntfNbrBadSequenceThe total number of Database Description packets which have been
received that either
a) has an unexpected DD sequence number
b) Unexpectedly has the init bit set
c) Has an options field differing from the last Options…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.8
ospfIntfNbrLoadingDoneThe total number of link state updates received for all
out-of-date portions of the database for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.9
ospfIntfNbrN1wayThe total number of Hello packets received from neighbours, in
which this router is not mentioned for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.10
ospfIntfNbrRstAdThe sum total number of times the Neighbour adjacency has been reset
on this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.11
ospfIntfNbrDownThe total number of Neighbouring routers down (i.e. in the initial
state of a neighbour conversation.) for this interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.12
ospfIntfNbrN2wayThe total number of Hello packets received from neighbours, in
which this router is mentioned for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.2.1.13
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3 · 1 row entry · 8 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfIntfChangeStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfIntfChangeStats'
The table of OSPF Interface change Statistics.
ospfIntfChangeStatsEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1
OSPF interface Change statistics.
Indexes
Column Syntax OID
ospfIntfIndexThe index of the OSPF Interface for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.1
ospfIntfHelloThe total number of Hello packets sent by this interface.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.2
ospfIntfDownThe total number of times the interface was down.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.3
ospfIntfLoopThe total number of times the interface was no longer connected to
the attatched network.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.4
ospfIntfUnloopThe total number of times the interface, connected back to
the attatched network.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.5
ospfIntfWaitTimerThe total number of times the Wait Timer has been fired,
(indicating the end of the waiting period that is required
before electing a (Backup) Designated Router) for this
OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.6
ospfIntfBackupThe total number of Backup Designated Routers on the attatched
network for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.7
ospfIntfNbrChangeThe total number of changes in the set of bidirectional neighbours
associated with the interface for this OSPF interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.3.1.8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4 · 1 row entry · 8 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfIntfErrorStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfIntfErrorStats'
The table of OSPF Interface Error Statistics.
ospfIntfErrorStatsEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1
Error Statistics for an OSPF area.
Column Syntax OID
ospfIntfErrIndexThe index of the OSPF Intf for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.1
ospfIntfErrAuthFailureThe total number of packets received with a wrong password in
this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.2
ospfIntfErrNetmaskMismatchThe total number of packets received with a wrong netmask in
this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.3
ospfIntfErrHelloMismatchThe total number of packets received with a different hello interval
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.4
ospfIntfErrDeadMismatchThe total number of packets received with a different dead interval
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.5
ospfIntfErrOptionsMismatchThe total number of packets received with a different options
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.6
ospfIntfErrUnknownNbrThe total number of packets received from an unknown neighbor
in this area.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.7
ospfIntfErrAreaMismatchThe total number of packets received with a wrong area.SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.5.3.4.1.8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1 · 1 row entry · 11 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk igmpSnoopStats
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::igmpSnoopStats'
Statistics for IGMP Snooping.
igmpSnoopStatsEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1
Statistics for IGMP Snooping.
Column Syntax OID
igmpSnoopVlanIndexThe index of the VLAN for which these statistics apply.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.1
rxIgmpValidPktsThe total number of valid IGMP packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.2
rxIgmpInvalidPktsThe total number of invalid IGMP packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.3
rxIgmpGenQueriesThe total number of IGMP General Query packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.4
rxIgmpGrpSpecificQueriesThe total number of IGMP Group Specific Query packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.5
rxIgmpLeavesThe total number of IGMP Leave packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.6
rxIgmpReportsThe total number of IGMP Report packets received
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.7
txIgmpGrpSpecificQueriesThe total number of IGMP Group Specific Query packets
transmitted on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.8
txIgmpReportsThe total number of IGMP Report packets transmitted
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.9
txIgmpLeavesThe total number of IGMP Leave packets transmitted
on this VLAN.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.10
igmpClearVlanStatsSetting this to clear(1) results in clearing the statistics for this
snooping VLAN.
Enumerationr/w
Enumerated Values:
1clear
2ok
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.2.7.1.1.11
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1 · 1 row entry · 8 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipRouteInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipRouteInfoTable'
The table of run-time IP routes.
ipRouteInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1
A row in the run-time IP route table
Indexes
Column Syntax OID
ipRouteInfoIndxThe index of this route table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.1
ipRouteInfoDestIpThe destination IP address of this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.2
ipRouteInfoMaskThe destination IP mask of this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.3
ipRouteInfoGatewayThe next-hop router address for this route.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.4
ipRouteInfoTagThe tag-type for this route.Enumeration
Enumerated Values:
1fixed
2static
3addr
4rip
5broadcast
6martian
7multicast
8vip
9bgp
10ospf
11none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.5
ipRouteInfoTypeThe type of the route.Enumeration
Enumerated Values:
1indirect
2direct
3local
4broadcast
5martian
6multicast
7other
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.6
ipRouteInfoInterfaceThe interface number for which the destination address is applicable.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.7
ipRouteInfoMetricThe metric of this route.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.1.1.1.8

arpInfoTable

table
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk arpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::arpInfoTable'
The table of ARP entries.
arpInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1
A row in the ARP table
Indexes
Column Syntax OID
arpInfoDestIpThe destination IP address of the ARP entry.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.1
arpInfoMacAddrThe MAC address for the ARP entry.SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.2
arpInfoVLANThe VLAN identifier for the ARP entry.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.3
arpInfoSrcPortThe port number on which this entry's equivalence is effective.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.4
arpInfoFlagThe flag associated with this ARP entry.Enumeration
Enumerated Values:
1clear
2unresolved
3permanent
4indirect
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.2.1.1.6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1 · 1 row entry · 8 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk vrrpInfoVirtRtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::vrrpInfoVirtRtrTable'
The table of VRRP virtual router run-time information.
vrrpInfoVirtRtrTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1
The run-time information about a VRRP virtual router.
Column Syntax OID
vrrpInfoVirtRtrIndexThe VRRP virtual router index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.1
vrrpInfoVirtRtrConfigThe status of the VRRP virtual router.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.2
vrrpInfoVirtRtrIDThe VRRP virtual router identifier.Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.3
vrrpInfoVirtRtrAddrThe VRRP virtual router IP address.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.4
vrrpInfoVirtRtrIfIndexThe IfIndex that the VRRP virtual router is representing.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.5
vrrpInfoVirtRtrPriorityThe priority value to be used by the specified VRRP virtual routers.Integer32
Constraints:
range: 1-254
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.6
vrrpInfoVirtRtrStateThe VRRP virtual router state.Enumeration
Enumerated Values:
1init
2master
3backup
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.7
vrrpInfoVirtRtrOwnershipThe VRRP virtual router ownership status.Enumeration
Enumerated Values:
1owner
2renter
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.3.1.1.8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2 · 1 row entry · 15 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfAreaInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfAreaInfoTable'
The table of OSPF Area information.
ospfAreaInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1
Information about a OSPF area.
Column Syntax OID
ospfAreaInfoIndexThe OSPF area number for which the OSPF info table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.1
ospfAreaInfoIdThe IP address of the OSPF area.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.2
ospfAreaInfoStatusArea Status:
disabled(0), enabled(1).
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.3
ospfTotalNumberOfInterfacesThe total number of interfaces for this OSPF area.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.4
ospfNumberOfInterfacesUpThe number of interfaces UP in area.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.5
ospfAreaInfoAuthTypeType of authentication being used:
none(1) - no authentication
password(2) - use password
md5(3) - use MD5 authentication.
Enumeration
Enumerated Values:
1none
2password
3md5
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.6
ospfAreaInfoSPFThe number of times SPF ran.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.7
ospfNumberOfLsdbEntriesThe number of Link State Database entries for this OSPF area.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.8
ospfAreaInfoAreaBorderRouterThe Area Border Router count.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.9
ospfAreaInfoASBoundaryRouterThe AS Boundary Router count.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.10
ospfAreaInfoTotalNeighboursThe total number of OSPF neighbors.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.11
ospfAreaInfoNeighborsINITstateTotal neighbors in INIT state.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.12
ospfAreaInfoNeighborsEXCHstateTotal neighbors in EXCH state.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.13
ospfAreaInfoNeighborsFULLstateTotal neighbors in FULL state.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.14
ospfAreaInfoLsTypesAcceptedLS types accepted by this area.OctetString
Constraints:
range: 0-40
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.2.1.15
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3 · 1 row entry · 19 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfIntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfIntfInfoTable'
The table of OSPF Interface information.
ospfIntfInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1
Information about a OSPF interface.
Indexes
Column Syntax OID
ospfIfInfoIndexThe OSPF interface number for which the OSPF info table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.1
ospfIfInfoIpAddressThe IP address of the OSPF interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.2
ospfIfInfoAreaThe index of the area that the interface belongs.Integer32
Constraints:
range: 0-2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.3
ospfIfInfoAdminStatusAdmin Status of the interface:
down(0), up(1).
Enumeration
Enumerated Values:
0down
1up
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.4
ospfIfInfoRouterIDThe router ID of the switch.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.6
ospfIfInfoStateThe state of the interface:
Down(0), Loopback(1),
Waiting(2), P to P(3),
DR(4), BackuDR(5),
DR Other(6).
Enumeration
Enumerated Values:
0down
1loopback
2waiting
3ptop
4dr
5backupdr
6drother
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.7
ospfIfInfoPriorityInterface router priorityInteger32
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.8
ospfIfInfoDesignatedRouterIDThe OSPF Designated Router ID for this OSPF interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.9
ospfIfInfoDesignatedRouterIpAddressThe OSPF Designated Router IP Address for this OSPF interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.10
ospfIfInfoBackupDesignatedRouterIDThe OSPF Backup Designated Router ID for this OSPF
interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.11
ospfIfInfoBackupDesignatedRouterIpAddressThe OSPF Backup Designated Router Ip Address for this OSPF
interface.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.12
ospfIfInfoHelloThe hello timer for this OSPF interface.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.13
ospfIfInfoDeadThe dead timer for this OSPF interface.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.15
ospfIfInfoWaitThe OSPF Wait interval for this OSPF interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.17
ospfIfInfoRetransmitThe retransmit interval for this OSPF interface.Integer32
Constraints:
range: 1-3600
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.19
ospfIfInfoTransitDelayThe transit delay for this OSPF interface.Integer32
Constraints:
range: 1-3600
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.20
ospfIfInfoTotalNeighboursThe total number of neighbours for this OSPF interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.21
ospfIfInfoEventsThe total number of events for this OSPF interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.22
ospfIfInfoAuthTypeType of authentication being used:
none(1) - no authentication,
password(2) - use password,
md5(3) - use MD5 authentication.
Enumeration
Enumerated Values:
1none
2password
3md5
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.3.1.23
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4 · 1 row entry · 16 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfVirtIntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfVirtIntfInfoTable'
The table of OSPF virtual interfaces information.
ospfVirtIntfInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1
Information about an OSPF virtual interface.
Column Syntax OID
ospfVirtIntfInfoIndexThe OSPF Virtual Interface number for which this table is
related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.1
ospfVirtIntfInfoIpAddrThe IP Address of this virtual interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.2
ospfVirtIntfInfoAreaThe index of the OSPF area to which this virtual interface
belongs.
Integer32
Constraints:
range: 0-2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.3
ospfVirtIntfInfoRouterIdThe Router ID.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.4
ospfVirtIntfInfoStateState
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.5
ospfVirtIntfInfoCostThe cost of the virtual interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.6
ospfVirtIntfInfoTransThe transit delay for the virtual interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.7
ospfVirtIntfInfoHelloHello interval.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.8
ospfVirtIntfInfoDeadDead interval.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.10
ospfVirtIntfInfoWaitWait interval.Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.12
ospfVirtIntfInfoRetraRetransmit interval.Integer32
Constraints:
range: 1-3600
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.14
ospfVirtIntfInfoAuthAuthentication.OctetString
Constraints:
range: 0-8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.15
ospfVirtIntfInfoEventsEvents.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.16
ospfVirtIntfInfoNbrThe IP Address of the OSPF neighbor for this virtual interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.17
ospfVirtIntfInfoNbrStateState
down(0),attempt(1),init(2),2 way(3),
exstart(4),exchange(5),loading(6),full(7)
Enumeration
Enumerated Values:
0down
1attempt
2init
3twoway
4exstart
5exchange
6loading
7full
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.18
ospfVirtIntfInfoAreaIdThea AreaId of the virtual interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.4.1.19
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5 · 1 row entry · 7 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfIfNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfIfNbrTable'
The table of OSPF Interface Neighbor information.
ospfIfNbrEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1
Information about a OSPF interface, neighbor pair.
Column Syntax OID
ospfIfNbrIntfIndexThe OSPF Interface number for which this Interface/Nbr table is
related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.1
ospfIfNbrIpAddrThe OSPF Neighbor ID .SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.2
ospfIfNbrPriorityThe priority of the OSPF neighbor.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.3
ospfIfNbrStateThe state of the OSPF neighbor.Enumeration
Enumerated Values:
1down
2attempt
3init
4twoway
5exStart
6exchange
7loading
8full
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.4
ospfIfNbrDesignatedRtrThe IP Address of the Designated Router for this OSPF Neighbor.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.5
ospfIfNbrBackupDesignatedRtrThe IP Address of the backup designated Router for this OSPF Neighbor.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.6
ospfIfNbrIpAddressThe IP Address of the OSPF Neighbor.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.5.1.7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfSumRangesInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfSumRangesInfoTable'
The table of OSPF summary ranges information.
ospfSumRangesInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1
Summary ranges information.
Column Syntax OID
ospfSumRangesInfoIndexThe OSPF range index for which this table is
related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.1
ospfSumRangesInfoAreaArea.Integer32
Constraints:
range: 0-2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.2
ospfSumRangesInfoNetworkNetwork.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.3
ospfSumRangesInfoMaskMask.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.4
ospfSumRangesInfoActionAction
propagate(0),
hide(1)
Enumeration
Enumerated Values:
0propagate
1hide
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.5
ospfSumRangesInfoListTypeSummary address list
Non-NSSA(0),
NSSA(1)
Enumeration
Enumerated Values:
0non-nssa
1nssa
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.6.1.6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfRoutesInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfRoutesInfoTable'
The table of OSPF routes information.
ospfRoutesInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1
OSPF routes information.
Column Syntax OID
ospfRoutesInfoIndexThe OSPF route table entry index for which
this table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.1
ospfRoutesInfoDestinationDestination.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.2
ospfRoutesInfoMaskMask.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.3
ospfRoutesInfoViaNext hop.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.4
ospfRoutesInfoTypeRoute type. Codes: IA - OSPF inter area,
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
* - best
OctetString
Constraints:
range: 0-8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.7.1.5
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8 · 1 row entry · 9 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfLsdbInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfLsdbInfoTable'
The OSPF Process's Link State Database.
ospfLsdbInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1
A single Link State Advertisement.
Column Syntax OID
ospfLsdbInfoIndexThe 32 bit index in the table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.1
ospfLsdbInfoAreaIdThe 32 bit identifier of the Area from which
the LSA was received.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.2
ospfLsdbInfoTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format.
Enumeration
Enumerated Values:
1routerLink
2networkLink
3summaryLink
4asSummaryLink
5asExternalLink
6multicastLink
7nssaExternalLink
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.3
ospfLsdbInfoLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.4
ospfLsdbInfoRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.5
ospfLsdbInfoSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number t…
OctetString
Constraints:
range: 10-10
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.6
ospfLsdbInfoAgeThis field is the age of the link state adver-
tisement in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.7
ospfLsdbInfoChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checks…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.8
ospfLsdbInfoAdvertisementThe entire Link State Advertisement, including
its header.
OctetString
Constraints:
range: 36-36
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.8.1.9
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9 · 1 row entry · 8 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ospfExtLsdbInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ospfExtLsdbInfoTable'
The OSPF Process's Links State Database.
ospfExtLsdbInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1
A single Link State Advertisement.
Column Syntax OID
ospfExtLsdbInfoIndexThe 32 bit index in the table.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.1
ospfExtLsdbInfoTypeThe type of the link state advertisement.
Each link state type has a separate advertise-
ment format.
Enumeration
Enumerated Values:
5asExternalLink
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.2
ospfExtLsdbInfoLsidThe Link State ID is an LS Type Specific field
containing either a Router ID or an IP Address;
it identifies the piece of the routing domain
that is being described by the advertisement.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.3
ospfExtLsdbInfoRouterIdThe 32 bit number that uniquely identifies the
originating router in the Autonomous System.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.4
ospfExtLsdbInfoSequenceThe sequence number field is a signed 32-bit
integer. It is used to detect old and dupli-
cate link state advertisements. The space of
sequence numbers is linearly ordered. The
larger the sequence number t…
OctetString
Constraints:
range: 10-10
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.5
ospfExtLsdbInfoAgeThis field is the age of the link state adver-
tisement in seconds.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.6
ospfExtLsdbInfoChecksumThis field is the checksum of the complete
contents of the advertisement, excepting the
age field. The age field is excepted so that
an advertisement's age can be incremented
without updating the checks…
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.7
ospfExtLsdbInfoAdvertisementThe entire Link State Advertisement, including
its header.
OctetString
Constraints:
range: 36-36
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.4.9.1.8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk igmpInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::igmpInfoTable'
The table of IGMP group membership information.
igmpInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1
Information about an IGMP group member .
Indexes
Column Syntax OID
igmpInfoIndexThe igmp group number for which the IGMP info table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.1
igmpInfoGroupIdThe IP address of the IGMP group.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.2
igmpInfoVlanIdThe VLAN ID for this IGMP group.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.3
igmpInfoVersionThe Version of IGMP host.Enumeration
Enumerated Values:
1v3
2v2
3v1
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.5
igmpInfoPortNumThe Version of IGMP host.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.6
igmpInfoExpiresThe expiration time for this host.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.1.1.7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk igmpMrtrInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::igmpMrtrInfoTable'
The table of IGMP mrouters.
igmpMrtrInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1
Information about an IGMP mrouter.
Column Syntax OID
igmpMrtrInfoIndexThe mrouter number for which the IGMP mrouter info table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.1
igmpMrtrInfoVlanIdThe VLAN ID on which this IGMP mrouter is attached.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.2
igmpMrtrInfoPortIdThe port on which this IGMP mrouter is attached.PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.3
igmpMrtrInfoVersionThe version of this IGMP mrouter.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.4
igmpMrtrInfoExpiresThe expiration time for this mrouter.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.5
igmpMrtrInfoMrtThe Maximum Query Response time of this IGMP mrouter.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.5.2.1.6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2 · 1 row entry · 13 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk rip2InfoIntfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::rip2InfoIntfTable'
The information table of RIP.
ripInfoIntfEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1
Information about RIP on IP interface.
Column Syntax OID
ripInfoIntfIndexThe interface number for which the RIP information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.1
ripInfoIntfVersionRIP version.Enumeration
Enumerated Values:
1ripVersion1
2ripVersion2
3ripVersionBoth
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.2
ripInfoIntfAddressThe interface address.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.3
ripInfoIntfStateThe status of RIP protocol.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.4
ripInfoIntfListenThe status of listening to route updates.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.5
ripInfoIntfTrigUpdateThe status of triggered updates.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.6
ripInfoIntfMcastUpdateThe status of multicast updates.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.7
ripInfoIntfPoisonReverseThe status of RIP poison reverse.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.8
ripInfoIntfSupplyThe status of supplying route updates.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.9
ripInfoIntfMetricRIP route metric for this interface.Integer32
Constraints:
range: 1-15
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.10
ripInfoIntfAuthThe type of Authentication used on this interface.Enumeration
Enumerated Values:
1none
2password
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.11
ripInfoIntfKeyRIP update authentication password.OctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.12
ripInfoIntfDefaultSpecifies what RIP does with default routes.Enumeration
Enumerated Values:
1both
2listen
3supply
4none
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.7.2.1.13
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipIntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipIntfInfoTable'
The table of IP interface information.
intfInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1
A row in IP interface information table.
Indexes
Column Syntax OID
intfInfoIndexThe interface number for which the information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.1
intfInfoAddrThe IP address of the interface.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.2
intfInfoNetMaskThe subnet mask of the interface.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.3
intfInfoBcastAddrThe broadcast address of the interface.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.4
intfInfoVlanThe VLAN number for this interface.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.5
intfInfoStatusThe status of the interface.Enumeration
Enumerated Values:
1up
2down
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.2.1.6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk gatewayInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::gatewayInfoTable'
The table containing information for the default gateways.
gatewayInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1
A row in the gateway information table
Column Syntax OID
gatewayInfoIndexThe gateway number for which the information is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1.1
gatewayInfoAddrThe IP address of the default gateway.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1.2
gatewayInfoVlanThe VLAN number for this gateway (0 for any).Integer32
Constraints:
range: 0-4090
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1.3
gatewayInfoStatusThe status of the default gateway.Enumeration
Enumerated Values:
1up
2failed
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.3.1.4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9 · 1 row entry · 4 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipInfoNwfTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipInfoNwfTable'
The table of IP network filter information.
ipInfoNwfEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1
A row in the IP network filter information table.
Indexes
Column Syntax OID
ipInfoNwfIndexThe netowrk filter number for which the NWF is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1.1
ipInfoNwfAddrThe IP address of the network filter.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1.2
ipInfoNwfMaskThe IP network filter mask.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1.3
ipInfoNwfStateThe state of the network filter.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.9.1.4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10 · 1 row entry · 8 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipInfoRmapTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipInfoRmapTable'
The table of IP route map information.
ipInfoRmapEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1
Information about an IP route map.
Indexes
Column Syntax OID
ipInfoRmapIndexThe route map number for which the RMAP is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.1
ipInfoRmapLpThe local-preference of the route map. 4294967295 means noneUnsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.2
ipInfoRmapMetricThe metric of the route map. 4294967295 means noneUnsigned32
Constraints:
range: 0-4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.3
ipInfoRmapPrecThe precedence of the route map.Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.4
ipInfoRmapWeightThe weight of the route map. 65535 means noneInteger32
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.5
ipInfoRmapStateEnable or disable the route map.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.6
ipInfoRmapApThe as-path prepend of the matched route. Up to 3 AS number can be
displayed for the string.
The usuage is:<AS number> [<AS number>][ <AS number>]
OctetString
Constraints:
range: 0-17
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.7
ipInfoRmapMetricTypeThe OSPF metric-type of the matched route.Enumeration
Enumerated Values:
1none
2type1
3type2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.10.1.8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6 · 1 row entry · 7 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipOspfAreaInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipOspfAreaInfoTable'
The table of OSPF Area Information.
ipOspfAreaInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1
Information about a OSPF area.
Column Syntax OID
ipOspfAreaInfoIndexThe OSPF area number for which the OSPF area table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.1
ipOspfAreaInfoIdThe IP Address of the OSPF area.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.2
ipOspfAreaInfoSpfIntervalThe SPF interval for the OSPF area.Integer32
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.3
ipOspfAreaInfoAuthTypeType of authentication being used.
none(1) - no authentication
password(2) - use password
md5(3) - use MD5 authentication.
Enumeration
Enumerated Values:
1none
2password
3md5
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.4
ipOspfAreaInfoTypeType of Area.
transit(0)
stub(1)
nssa(2)
Enumeration
Enumerated Values:
0transit
1stub
2nssa
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.5
ipOspfAreaInfoMetricMetric (1-65535)Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.6
ipOspfAreaInfoStatusStatus
disabled(0)
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.6.1.7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7 · 1 row entry · 6 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipOspfRangeInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipOspfRangeInfoTable'
The table of OSPF summary range information.
ipOspfRangeInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1
Information about an OSPF summary range.
Column Syntax OID
ipOspfRangeInfoIndexThe range number for which the OSPF summary range table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.1
ipOspfRangeInfoAddrThe IP Address of the range.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.2
ipOspfRangeInfoMaskThe mask of the range.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.3
ipOspfRangeInfoAreaIndexThe area index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.4
ipOspfRangeInfoHideStateThe state of the hide range.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.5
ipOspfRangeInfoStateThe state of the range.Enumeration
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.7.1.6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8 · 1 row entry · 12 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipOspfIntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipOspfIntfInfoTable'
The table of OSPF Interface Information.
ipOspfIntfInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1
Information about an OSPF Interface.
Column Syntax OID
ipOspfIntfInfoIndexThe OSPF Interface number for which the OSPF Interface table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.1
ipOspfIntfInfoIdThe IP Address of the OSPF interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.2
ipOspfIntfInfoAreaThe index of the area that the interface belongsInteger32
Constraints:
range: 0-2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.3
ipOspfIntfInfoMdkeyThe MD5 key for the OSPF interface
0 (none) no MD5 authentication.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.4
ipOspfIntfInfoCostInterface costInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.5
ipOspfIntfInfoPrioInterface router priorityInteger32
Constraints:
range: 1-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.6
ipOspfIntfInfoHelloHello intervalInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.7
ipOspfIntfInfoDeadDead intervalInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.9
ipOspfIntfInfoTransTransit delayInteger32
Constraints:
range: 1-3600
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.11
ipOspfIntfInfoRetraRetransmit intervalInteger32
Constraints:
range: 1-3600
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.12
ipOspfIntfInfoAuthKeyAuthentication KeyOctetString
Constraints:
range: 0-8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.13
ipOspfIntfInfoStatusStatus of the interface
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.8.1.15
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9 · 1 row entry · 10 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipOspfVirtIntfInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipOspfVirtIntfInfoTable'
The table of OSPF Virtual Interface Information.
ipOspfVirtIntfInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1
Information about an OSPF virtual Interface.
Column Syntax OID
ipOspfVirtIntfInfoIndexThe OSPF Virtual Interface number for which the OSPF
Virtual Interface table is related.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.1
ipOspfVirtIntfInfoAreaIdThe index of the OSPF area to which this virtual interface
belongs.
Integer32
Constraints:
range: 0-2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.2
ipOspfVirtIntfInfoNbrThe IP Address of the OSPF neighbor for this virtual interface.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.3
ipOspfVirtIntfInfoMdkeyThe MD5 key for the OSPF virtual interface
0 (none) no MD5 authentication.
Integer32
Constraints:
range: 0-255
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.4
ipOspfVirtIntfInfoHelloHello intervalInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.5
ipOspfVirtIntfInfoDeadDead intervalInteger32
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.7
ipOspfVirtIntfInfoTransTransit delayInteger32
Constraints:
range: 1-3600
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.9
ipOspfVirtIntfInfoRetraRetransmit intervalInteger32
Constraints:
range: 1-3600
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.10
ipOspfVirtIntfInfoAuthKeyAuthentication KeyOctetString
Constraints:
range: 0-8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.11
ipOspfVirtIntfInfoStatusStatus
disabled(0),
enabled(1)
Enumeration
Enumerated Values:
0disabled
1enabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.9.1.12
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipOspfHostInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipOspfHostInfoTable'
The table of OSPF Host Information.
ipOspfHostInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1
Information about a OSPF host.
Column Syntax OID
ipOspfHostInfoIndexThe OSPF host number for which the OSPF host table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.1
ipOspfHostInfoIpAddrThe IP Address of the OSPF host.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.2
ipOspfHostInfoAreaIndexThe area index.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.3
ipOspfHostInfoCostThe cost of the corresponding host.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.4
ipOspfHostInfoStateEnable or disable an OSPF HostEnumeration
Enumerated Values:
2enabled
3disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.10.1.5
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.12 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk ipOspfMd5keyInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::ipOspfMd5keyInfoTable'
The table of OSPF MD5 keys Information.
ipOspfMd5keyInfoEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.12.1
Information about an OSPF MD keys table.
Column Syntax OID
ipOspfMd5keyInfoIndexThe OSPF MD5 Key number for which the OSPF MdKey table is related.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.12.1.1
ipOspfMd5keyInfoKeyThe character string representing the MD5 Key.OctetString
Constraints:
range: 0-16
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.3.8.11.12.1.2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.1 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk vrrpOperVirtRtrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::vrrpOperVirtRtrTable'
An entry in the table of virtual routers.
vrrpOperVirtRtrEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.1.1
A row in the vrrpOperVirtRtrTable
Column Syntax OID
vrrpOperVirtRtrIndexThe index for the VRRP virtual router.SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.1.1.1
vrrpOperVirtRtrBackupWhen set to a value of 'backup(2)' it forces the specified
master virtual router into backup mode.
'ok(1)' is returned when the object os read.
Enumerationr/w
Enumerated Values:
1ok
2backup
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.3.4.1.1.1.2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.1 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk qosCurCfgPortPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::qosCurCfgPortPriorityTable'
The table of QOS Port Priority configuration.
qosCurCfgPortPriorityEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.1.1
Information about a particular QOS Port Priority configuration.
Column Syntax OID
qosCurCfgPortIndexSwitch Port NumberPortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.1.1.1
qosCurCfgPortPrioritySwitch Port Priority Should be between 0 and 7Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.1.1.2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.2 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk qosNewCfgPortPriorityTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::qosNewCfgPortPriorityTable'
The table of QOS Port Priority configuration.
qosNewCfgPortPriorityEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.2.1
Information about a particular QOS Port Priority configuration.
Column Syntax OID
qosNewCfgPortIndexSwitch Port NumberPortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.2.1.1
qosNewCfgPortPrioritySwitch Port Priority Should be between 0 and 7Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.2.1.2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.3 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk qosCurCfgPriorityCoSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::qosCurCfgPriorityCoSTable'
The table of Frame Priority and COSq configuration.
qosCurCfgPriorityCoSEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.3.1
Information about a particular Frame Priority and COSq configuration.
Column Syntax OID
qosCurCfgPriorityIndexFrame priority NumberInteger32
Constraints:
range: 0-7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.3.1.1
qosCurCfgPriorityCoSqCoSq for a Frame Priority Should be between 0 and 7Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.3.1.2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.4 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk qosNewCfgPriorityCoSTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::qosNewCfgPriorityCoSTable'
The table of Frame Priority and COSq configuration.
qosNewCfgPriorityCoSEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.4.1
Information about a particular Frame Priority and COSq configuration.
Column Syntax OID
qosNewCfgPriorityIndexFrame priority NumberInteger32
Constraints:
range: 0-7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.4.1.1
qosNewCfgPriorityCoSqCoSq for a Frame Priority Should be between 0 and 7Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.4.1.2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.5 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk qosCurCfgCosWeightTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::qosCurCfgCosWeightTable'
The table of CoSq and Weight configuration.
qosCurCfgCosWeightEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.5.1
Information about a particular CoSq and Weight configuration.
Column Syntax OID
qosCurCfgCosIndexCoSq NumberInteger32
Constraints:
range: 0-7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.5.1.1
qosCurCfgCosWeightWeight of CoSqInteger32
Constraints:
range: 0-15
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.5.1.2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.6 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk qosNewCfgCosWeightTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::qosNewCfgCosWeightTable'
The table of CoSq and Weight configuration.
qosNewCfgCosWeightEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.6.1
Information about a particular CoSq and Weight configuration.
Column Syntax OID
qosNewCfgCosIndexCoSq NumberInteger32
Constraints:
range: 0-7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.6.1.1
qosNewCfgCosWeightWeight of CoSqInteger32r/w
Constraints:
range: 0-15
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.8.1.1.6.1.2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1 · 1 row entry · 41 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk aclCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::aclCurCfgTable'
The table of current ACL configuration.
aclCurCfgEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1
Current information about a particular ACL configuration entry.
Indexes
Column Syntax OID
aclCurCfgIndexThe index associated with this ACL entry.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.1
aclCurCfgGroupThe index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.3
aclCurCfgFilterActionThe action to be performed on a packet that matches the filter
settings of this ACL entry.
Enumeration
Enumerated Values:
0none
1permit
2deny
3setprio
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.4
aclCurCfgFilterActionSetPrioThe value to be used when the action to be performed is setprio
for this ACL entry.
Enumeration
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.5
aclCurCfgEthFmtThe packet ethernet format to be filtered.Enumeration
Enumerated Values:
0none
1ethernet2
2snap
3llc
4ieee802dot3
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.6
aclCurCfgTagFmtThe packet tag format to be filtered.Enumeration
Enumerated Values:
1disabled
2any
3untagged
4tagged
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.7
aclCurCfgIPFmtThe packet IP format to be filtered.Enumeration
Enumerated Values:
1none
2ipv4
3ipv6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.8
aclCurCfgSrcMACAddressThe source MAC address to be filtered.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.9
aclCurCfgSrcMACMaskThe address mask applied to aclCurCfgSrcMACAddress for filtering.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.10
aclCurCfgDstMACAddressThe destination MAC address to be filtered.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.11
aclCurCfgDstMACMaskThe address mask applied to aclCurCfgDstMACAddress for filtering.SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.12
aclCurCfgEthernetTypeNameThe Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered.
Enumeration
Enumerated Values:
0none
1arp
2ipv4
3ipv6
4mpls
5rarp
6any
7other
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.13
aclCurCfgEthernetTypeValueThe Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined valu…
Integer32
Constraints:
range: 1536-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.14
aclCurCfgVLanIdThe virtual LAN identifier to be filtered.Integer32
Constraints:
range: 0-4095
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.15
aclCurCfgVLanMaskThe mask applied to aclCurCfgVLanId for filtering.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.16
aclCurCfg8021pPriorityThe 802.1p priority to be filtered.Enumeration
Enumerated Values:
0none
1priority0
2priority1
3priority2
4priority3
5priority4
6priority5
7priority6
8priority7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.17
aclCurCfgTypeOfServiceThe type of service to be filtered.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.18
aclCurCfgProtocolThe protocol to be filtered.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.19
aclCurCfgSrcIPAddressThe source IP address to be filtered.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.20
aclCurCfgSrcIPMaskThe address mask applied to aclCurCfgSrcIPAddress for filtering.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.21
aclCurCfgDstIPAddressThe destination IP address to be filtered.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.22
aclCurCfgDstIPMaskThe address mask applied to aclCurCfgDstIPAddress for filtering.SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.23
aclCurCfgSrcPortThe source TCP/UDP port number to be filtered.Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.24
aclCurCfgSrcPortMaskThe mask applied to aclCurCfgSrcPort for filtering.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.25
aclCurCfgDstPortThe destination TCP/UDP port number to be filtered.Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.26
aclCurCfgDstPortMaskThe mask applied to aclCurCfgDstPort for filtering.SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.27
aclCurCfgTCPFlagsThe TCP flags to be filtered.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
-…
Bits
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.28
aclCurCfgEgressPortsThe port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…
OctetString.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.29
aclCurCfgStatisticsWhether statistics collection for this ACL is enabled or not.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.30
aclCurCfgTCPFlagsMaskThe TCP flags mask.
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reserved1(0)

where:
- reserved1 - 0;
- reserved2…
Bits
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.39
aclCurCfgMeterActionMeter Action for this ACL.Enumeration
Enumerated Values:
0unconfigured
1outdrop
2outpass
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.41
aclCurCfgMeterEnableMeter state for this ACL.Enumeration
Enumerated Values:
0enabled
1disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.42
aclCurCfgKbitsSecThe commited rate of meter associated with this ACL entry.Unsigned32
Constraints:
range: 64-10000000
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.43
aclCurCfgKbitsBurstThe maxmium burst sizeof meter associated with this ACL entry.Enumeration
Enumerated Values:
32kbits32
64kbits64
128kbits128
256kbits256
512kbits512
1024kbits1024
2048kbits2048
4096kbits4096
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.44
aclCurCfgUserSet user defined priority for this ACL.Integer32
Constraints:
range: 0-7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.45
aclCurCfgInprofDscpSet in profile pkts DSCP value.Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.46
aclCurCfgTosTo enable/disable setting pkts based on TOS bits.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.47
aclCurCfgOutprofDscpSet out profile pkts DSCP value.Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.48
aclCurCfgUserEnableSet update method for this ACL.Enumeration
Enumerated Values:
0disabled
1userdefined
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.49
aclCurCfgInprofDscpEnableWhether in profile update DSCP for this ACL is enabled or not.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.50
aclCurCfgOutprofDscpEnableWhether out profile update DSCP for this ACL is enabled or not.Enumeration
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.1.1.51
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2 · 1 row entry · 53 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk aclNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::aclNewCfgTable'
The table of new ACL configuration.
aclNewCfgEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1
New information about a particular ACL configuration.
Indexes
Column Syntax OID
aclNewCfgIndexThe index associated with this ACL entry.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.1
aclNewCfgGroupThe index of the ACL group to which this ACL entry is a member of.
A value of zero means the ACL is not a member of any group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.3
aclNewCfgFilterActionThe action to be performed on a packet that matches the filter
settings of this ACL entry.
Enumerationr/w
Enumerated Values:
0none
1permit
2deny
3setprio
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.4
aclNewCfgFilterActionSetPrioThe COS queue to be used when the action for this ACL entry is
set to setprio.
Enumerationr/w
Enumerated Values:
0none
1prio0
2prio1
3prio2
4prio3
5prio4
6prio5
7prio6
8prio7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.5
aclNewCfgEthFmtThe packet ethernet format to be filtered.Enumerationr/w
Enumerated Values:
0none
1ethernet2
2snap
3llc
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.6
aclNewCfgTagFmtThe packet tagging format to be filtered.Enumerationr/w
Enumerated Values:
1disabled
2any
3none
4tagged
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.7
aclNewCfgIPFmtThe packet IP format to be filtered.Enumerationr/w
Enumerated Values:
1none
2ipv4
3ipv6
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.8
aclNewCfgSrcMACAddressThe source MAC address to be filtered. Whenever this object is
set to a nonzero value, the aclNewCfgSrcMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.9
aclNewCfgSrcMACMaskThe address mask to be applied to aclNewCfgSrcMACAddress
for filtering.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.10
aclNewCfgDstMACAddressThe destination MAC address to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgDstMACMask object, if not
yet set, will be automatically set to ff:ff:ff:ff:ff:ff.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.11
aclNewCfgDstMACMaskThe address mask to be applied to aclNewCfgDstMACAddress
for filtering.
SNMPv2-TCMacAddressr/w
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.12
aclNewCfgEthernetTypeNameThe Ethernet type to be filtered. If the value of this
object is other(7), the value of aclNewCfgEthernetTypeValue
indicates the ethernet type that will be filtered. If this
object is set to a value other than other(7),…
Enumerationr/w
Enumerated Values:
0none
1arp
2ipv4
3ipv6
4mpls
5rarp
6any
7other
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.13
aclNewCfgEthernetTypeValueThe Ethernet type value to be filtered. The value of this
object is equivalent to the value of aclNewCfgEthernetTypeName
except when the value of aclNewCfgEthernetTypeName is other(7),
which can be any user-defined valu…
Integer32r/w
Constraints:
range: 1536-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.14
aclNewCfgVLanIdThe virtual LAN identifier to be filtered. Whenever this object
is set to a nonzero value, the aclNewCfgVLanMask object, if not
yet set, will be automatically set to 4095 (0xfff). When this
object is set to 0, the Vlan …
Integer32r/w
Constraints:
range: 0-4095
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.15
aclNewCfgVLanMaskThe mask to be applied to aclNewCfgVLanId for filtering.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.16
aclNewCfg8021pPriorityThe 802.1p priority to be filtered.Enumerationr/w
Enumerated Values:
0none
1priority0
2priority1
3priority2
4priority3
5priority4
6priority5
7priority6
8priority7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.17
aclNewCfgTypeOfServiceThe type of service to be filtered.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.18
aclNewCfgProtocolThe protocol to be filtered.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.19
aclNewCfgSrcIPAddressThe source IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgSrcIPMask object, if not yet set,
will be automatically set to 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.20
aclNewCfgSrcIPMaskThe address mask to be applied to aclNewCfgSrcIPAddress
for filtering.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.21
aclNewCfgDstIPAddressThe destination IP address to be filtered. Whenever this object is set
to a nonzero value, the aclNewCfgDstIPMask object, if not yet set,
will be automatically set to 255.255.255.255.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.22
aclNewCfgDstIPMaskThe address mask to be applied to aclNewCfgDstIPAddress for filtering.SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.23
aclNewCfgSrcPortThe source TCP/UDP port number to be filtered. Whenever this
object is set if the aclNewCfgSrcPortMask object is not set
will be automatically set to 65535 (0xffff).
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.24
aclNewCfgSrcPortMaskThe mask to be applied to aclNewCfgSrcPort for filtering.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.25
aclNewCfgDstPortThe destination TCP/UDP port number to be filtered. Whenever this
object is set the aclNewCfgSrcPortMask object, if not yet set, will
be automatically set to 65535 (0xffff).
Integer32r/w
Constraints:
range: 1-65535
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.26
aclNewCfgDstPortMaskThe mask to be applied to aclNewCfgDstPort for filtering.SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.27
aclNewCfgTCPFlagsThe TCP flags to be filtered.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|___…
Bitsr/w
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.28
aclNewCfgEgressPortsThe port list in the ACL configured for egress filtering.
The ports are presented in bitmap format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ port 9
…
OctetString.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.29
aclNewCfgStatisticsWhether statistics collection for this ACL is enabled or not.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.30
aclNewCfgAddEgressPortThe port to be added to the specified ACL for egress filtering.
A value of zero is always returned when this object is read.
PortNumberr/w.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.31
aclNewCfgRemoveEgressPortThe port to be removed from the specified ACL. A value of zero
is always returned when this object is read.
PortNumberr/w.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.32
aclNewCfgDeleteThis is an action object to delete an ACL entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.33
aclNewCfgTCPFlagsMaskThe TCP flags mask.
The TCP flags are presented in bitmap format, as follows:
OCTET
xxxxxxxx
||||..||
||||..||_tcpFIN(7)
||||..|__tcpSYN(6)
||||
||||_____tcpACK(3)
|||______tcpURG(2)
||_______reserved2(1)
|________reser…
Bitsr/w
Enumerated Values:
0reserved1
1reserved2
2tcpURG
3tcpACK
4tcpPSH
5tcpRST
6tcpSYN
7tcpFIN
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.39
aclNewCfgMeterActionMeter Action for this ACL.Enumerationr/w
Enumerated Values:
0unconfigured
1outdrop
2outpass
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.41
aclNewCfgMeterEnableMeter state for this ACL.Enumerationr/w
Enumerated Values:
0enabled
1disabled
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.42
aclNewCfgKbitsSecThe commited rate of meter associated with this ACL entry.Unsigned32r/w
Constraints:
range: 64-10000000
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.43
aclNewCfgKbitsBurstThe maximum burst size of the meter associated with this ACL entry.Enumerationr/w
Enumerated Values:
32kbits32
64kbits64
128kbits128
256kbits256
512kbits512
1024kbits1024
2048kbits2048
4096kbits4096
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.44
aclNewCfgUserSet user defined priority for this ACL.Integer32r/w
Constraints:
range: 0-7
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.45
aclNewCfgInprofDscpSet in profile pkts DSCP value.Integer32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.46
aclNewCfgTosTo enable/disable setting pkts based on TOS bits.Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.47
aclNewCfgOutprofDscpSet out profile pkts DSCP value.Integer32r/w
Constraints:
range: 0-63
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.48
aclNewCfgUserEnableSet update method for this ACL.Enumerationr/w
Enumerated Values:
0disabled
1userdefined
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.49
aclNewCfgInprofDscpEnableWhether in profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the in profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when setting …
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.50
aclNewCfgOutprofDscpEnableWhether out profile update DSCP for this ACL is enabled or not.
Only the value disable(0) can be set, causing the out profile
update DSCP to be disabled for this ACL.
The value enable(1) is automatically set when settin…
Enumerationr/w
Enumerated Values:
0disable
1enable
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.51
aclNewCfgResetThis is an action object to reset an ACL entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.53
aclNewCfgEthernetResetThis is an action object to reset an ACL Ethernet entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.54
aclNewCfgIpv4ResetThis is an action object to reset an ACL IPV4 entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.55
aclNewCfgTcpudpResetThis is an action object to reset an ACL Tcpudp entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.56
aclNewCfgMeterResetThis is an action object to reset an ACL Meter entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.57
aclNewCfgRemarkResetThis is an action object to reset an ACL Remark entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.58
aclNewCfgRemarkInprofResetThis is an action object to reset an ACL Remark Inprof entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.59
aclNewCfgRemarkOutprofResetThis is an action object to reset an ACL Remark Outprof entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.60
aclNewCfgPktfmtResetThis is an action object to reset an ACL Pktfmt entry. A value of
other(1) is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2reset
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.1.2.1.61
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.1 · 1 row entry · 2 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk aclGroupCurCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::aclGroupCurCfgTable'
The table of current ACL Group configuration.
aclGroupCurCfgEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.1.1
Information about a particular ACL configuration.
Column Syntax OID
aclGroupCurCfgIndexThe index associated with this ACL Group entry.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.1.1.1
aclGroupCurCfgMemberAclsThe ACL members of this ACL group, presented in bitmap
format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| …
OctetString.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.1.1.2
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2 · 1 row entry · 5 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk aclGroupNewCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::aclGroupNewCfgTable'
The table of new ACL Group configuration.
aclGroupNewCfgEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1
New information about a particular ACL configuration.
Column Syntax OID
aclGroupNewCfgIndexThe index associated with this ACL Group entry.SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.1
aclGroupNewCfgMemberAclsThe ACL members of this ACL group, presented in bitmap
format, as follows:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |
|| || |_ ACL 9
|| ||
|| ||___ ACL 8
|| …
OctetString.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.2
aclGroupNewCfgAddAclThe index of the ACL entry to be added into this ACL group.
A successful set operation on this object will also set the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is alway…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.4
aclGroupNewCfgRemoveAclThe index of the ACL entry to be removed from this ACL group.
A successful set operation on this object will unset the bit
corresponding to the ACL entry in the aclGroupNewCfgMemberAcls
bitmap. A value of zero is always…
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.5
aclGroupNewCfgDeleteThis is an action object to delete an ACL group. A value of other(1)
is always returned when this object is read.
Enumerationr/w
Enumerated Values:
1other
2delete
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.3.2.1.8
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1 · 1 row entry · 3 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk aclCurCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::aclCurCfgPortTable'
The table of port acl groups configuration.
aclCurCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1.1
Information about a particular port acl configuration.
Column Syntax OID
aclCurCfgPortIndexThe identifier of a particular port. This is also
index to the entLogicalTable of Entity MIB.
PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1.1.1
aclCurCfgPortAclBmapThe acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.

in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx …
OctetString
Constraints:
range: 0-512
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1.1.2
aclCurCfgPortAclGrpBmapThe acl groups applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
…
OctetString
Constraints:
range: 0-512
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.1.1.4
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2 · 1 row entry · 7 columns
Uses the hp variant from /opt/observium/mibs/hp.
Command help
Walk aclNewCfgPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BLADETYPE4-NETWORK-MIB' -M '/opt/observium/mibs/hp:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BLADETYPE4-NETWORK-MIB::aclNewCfgPortTable'
The table of port acl configuration.
aclNewCfgPortTableEntry row .1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1
Information about a particular port acl groups configuration.
Column Syntax OID
aclNewCfgPortIndexThe identifier of a particular port. This is also
index to the entLogicalTable of Entity MIB.
PortNumber.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.1
aclNewCfgPortAddAclThe acl to be added to the specified port. A
'0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.2
aclNewCfgPortAddAclGrpThe acl group to be added to the specified port. A
'0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.4
aclNewCfgPortRemoveAclThe acl to be removed from the specified port.
A '0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.5
aclNewCfgPortRemoveAclGrpThe acl group to be removed from the specified port.
A '0' value is returned when read.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.7
aclNewCfgPortAclBmapThe acls applied to the port. The acls are
presented in bitmap format. This string displays acl number
from 1 to 896.
in receiving order:

OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| …
OctetString
Constraints:
range: 0-512
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.8
aclNewCfgPortAclGrpBmapThe acl groups applied to the port. The acl groups are
presented in bitmap format. This string displays group number
from 1 to 4096.

in receiving order:

OCTET 1 OCTET 2 .....
xxx…
OctetString
Constraints:
range: 0-512
.1.3.6.1.4.1.11.2.3.7.11.33.4.2.9.1.4.2.1.10