mobileStatLteSupport

BINTEC-MOBILE-MIB · .0.4.1.22.1.20
MIB view Table view

Object

column Enumeration 
Signals for configuration software if the hardware
is capable to attach to LTE networks.
- none(1)          no LTE support
- available(2)     LTE support available

Context

MIB
BINTEC-MOBILE-MIB
OID
.0.4.1.22.1.20
Type
column
Access
readonly
Status
current
Parent
mobileStatEntry
Table
mobileStatTable
Siblings
23

Syntax

Enumeration

Values & Constraints

Enumerated Values
1none
2available

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
mobileStatIfIndex
The interface index of the corresponding TTY interface.
columnSNMPv2-SMIInteger32.0.4.1.22.1.1
mobileStatCellId
The actual Cell-ID the UMTS-Modem is registered.
columnOctetString.0.4.1.22.1.10
mobileStatAccessType
The Access Type the modem actually registers on. Normally the `edge' or `hs*pa' Access Types aren't provided in detail by the network operator and/or modem. Possible Access Types …
columnEnumeration.0.4.1.22.1.11
mobileStatCSQ
The GSM receive signal level in decibel (db). A value below -100 signals a very low signal quality. A value between -100 and -80 means that signal quality is low. If the value is …
columndBm SNMPv2-SMIInteger32.0.4.1.22.1.12
mobileStatIMEI
The IMEI (International Mobile Equipment Identity) of the detected mobile device.
columnOctetString.0.4.1.22.1.13
mobileStatCtrlIfIndex
If the UMTS card provides several channels and one could be used to control the card e.g. get status information from the card like the signal quality a dedicated daemon uses the …
columnSNMPv2-SMIInteger32.0.4.1.22.1.14
mobileStatGpsSupport
Signals for configuration software if the hardware is capable to deliver GPS information. - none(1) no GPS support - available(2) GPS support available
columnEnumeration.0.4.1.22.1.15
mobileStatIccId
The ICC-ID of the SIM-Card found in the mobile device which is actually enumerated with mobileStatIfIndex. Some UMTS modem vendors offer no capability to read this …
columnOctetString.0.4.1.22.1.16
mobileStatHomePLMN
The PLMN (Public Land Mobile Network) code of the Home PLMN.
columnSNMPv2-SMIInteger32.0.4.1.22.1.17
mobileStatSubscriberNumber
The Subscriber Number stored on the SIM card.
columnOctetString.0.4.1.22.1.18
mobileStatServiceCenterAddr
The Service Center Address stored on the SIM card.
columnOctetString.0.4.1.22.1.19
mobileStatOperStatus
The operational status of the GSM modem. The following states can occur: - up(1) the device is up - initialization finished - down(2) the device is down - init…
columnEnumeration.0.4.1.22.1.2
mobileStatBand
The Band Class currently used.
columnEnumeration.0.4.1.22.1.21
mobileStatSmsStorageBits
The SMS storage types supported by the modem hardware.
columnBits.0.4.1.22.1.22
mobileStatAction
Perform extern triggered Action on sierra wireless modems - idle no waiting Action - reset reset the modem - qmi switch modem into qmi mode - dip …
columnEnumeration.0.4.1.22.1.23
mobileStatATexec
Perform a User requested AT Command in idle state
columnOctetString.0.4.1.22.1.24
mobileStatErrorCode
If an error occurs (OperStatus is set to error) this variable shows the reason for the error. Currently the following error codes are possible: - none(1) no error occured -…
columnEnumeration.0.4.1.22.1.3
mobileStatCommand
The last command that was sent to the mobile device.
columnOctetString.0.4.1.22.1.4
mobileStatAnswer
The last answer received from the mobile device.
columnOctetString.0.4.1.22.1.5
mobileStatInDiscards
The number of frames which can't be enqueued upstream.
columnSNMPv2-SMIInteger32.0.4.1.22.1.6
mobileStatSelectedPLMN
The PLMN (Public Land Mobile Network) code of the Network currently selected.
columnSNMPv2-SMIInteger32.0.4.1.22.1.7
mobileStatNetwork
The name of the PLMN (Public Land Mobile Network) actually being used.
columnOctetString.0.4.1.22.1.8
mobileStatLocationAreaCode
The actual Location Area Code the UMTS-Modem is registered.
columnOctetString.0.4.1.22.1.9