mobileSimCfgDispatch
BINTEC-MOBILE-MIB ·
.0.4.1.21.1.8
Object
column
r/w
Enumeration
The dispatch service the Modem should be used for. The SIM-Card should support/enable basic functionality to use the service (eg access circuit switched networks to use V.110 and/or V.120). Routing tasks (IP, IPX, X.25, bridging, ...) should use ppp(1). For isdnlogin program use the isdnlogin(2) item. For IPSec callback use item ipsec(60).
Context
- MIB
- BINTEC-MOBILE-MIB
- OID
.0.4.1.21.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- mobileSimCfgEntry
- Table
- mobileSimCfgTable
- Siblings
- 15
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | ppp |
2 | isdnlogin |
3 | none |
13 | ppp-modem |
15 | ppp-v110-1200 |
16 | ppp-v110-2400 |
17 | ppp-v110-4800 |
18 | ppp-v110-9600 |
19 | ppp-v110-14400 |
20 | ppp-v110-19200 |
21 | ppp-v110-38400 |
23 | ppp-v120 |
26 | ppp-modem-profile-1 |
27 | ppp-modem-profile-2 |
28 | ppp-modem-profile-3 |
29 | ppp-modem-profile-4 |
30 | ppp-modem-profile-5 |
31 | ppp-modem-profile-6 |
32 | ppp-modem-profile-7 |
33 | ppp-modem-profile-8 |
60 | ipsec |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mobileSimCfgIccId The ICC-ID of the used SIM-Card to configure.
Unfortunately some UMTS modem vendors offer no capability
to read this ID before entering the valid PIN :-( | column | OctetString | .0.4.1.21.1.1 |
| mobileSimCfgCugAddr The provider assigned IP-Address if any. | column | SNMPv2-SMIIpAddress | .0.4.1.21.1.15 |
| mobileSimCfgCugAuth The authentication method to be used. | column | Enumeration | .0.4.1.21.1.16 |
| mobileSimCfgCugUser The provider assigned user name. | column | SNMPv2-TCDisplayString | .0.4.1.21.1.17 |
| mobileSimCfgCugPwd The provider assigned password. | column | SNMPv2-TCDisplayString | .0.4.1.21.1.18 |
| mobileSimCfgOperatorScan Handling of scanning available Providers (PLMN)
never - use only home or fixed PLMN
startup - scan on startup, only for information
always - used for using roaming… | column | Enumeration | .0.4.1.21.1.19 |
| mobileSimCfgPIN The PIN code of the SIM card. This is used to
authorize the access to the SIM-Card. | column | OctetString | .0.4.1.21.1.2 |
| mobileSimCfgPinData Not accessible entry for storing the PIN permanently.
This is a security feature (?) used by France Telecom. | column | OctetString | .0.4.1.21.1.20 |
| mobileSimCfgCugAPN Closed User Group authentication APN,
may be different from registration APN. | column | OctetString | .0.4.1.21.1.21 |
| mobileSimCfgPUK The PUK code of the SIM card.
Needed in case of wrong PIN input for three times in a row. | column | OctetString | .0.4.1.21.1.3 |
| mobileSimCfgAPN GPRS APN (Access Point Name) used by this SIM-Card. | column | OctetString | .0.4.1.21.1.4 |
| mobileSimCfgAccessMode The default Access Type to be used by the GPRS/UMTS/LTE Modem.
This setting depends on local network availability and
therefore it's bound to the network operator specific
SIM-Car… | column | Enumeration | .0.4.1.21.1.5 |
| mobileSimCfgRoamingMode The Roaming configuration for this mobile interface.
Possible values are:
disabled - no roaming at all
auto - roaming decision by modems factory defaults
… | column | Enumeration | .0.4.1.21.1.6 |
| mobileSimCfgRoamingPLMN The PLMN (Public Land Mobile Netword) code used for Roaming.
Used only if mobileDevCfgRoamingMode_fixed is selected. | column | SNMPv2-SMIInteger32 | .0.4.1.21.1.7 |
| mobileSimCfgGsmFallback If the Router is called using the GsmFallback number
the actual connection is dropped and the Access Type
is switched back from UMTS to GSM. | column | OctetString | .0.4.1.21.1.9 |