mobileSimCfgAccessMode

BINTEC-MOBILE-MIB · .0.4.1.21.1.5

Object

column r/w Enumeration

The default Access Type to be used by the GPRS/UMTS/LTE Modem.
This setting depends on local network availability and
therefore it's bound to the network operator specific
SIM-Card. Possible settings are:
   auto(1)           -- factory default settings
   gprs-only(2)      -- GPRS only (no UMTS/LTE)
   umts-only(3)      -- UMTS only (no GPRS/LTE)
   gprs-pref(4)      -- GPRS preferred (Priority 2G/3G/xxx)
   umts-pref(5)      -- UMTS preferred (Priority 3G/2G/xxx)
   lte-only(7)       -- LTE only
   lte-pref(8)       -- LTE preferred (Priority 4G/3G/2G)
   lte-umts(9)       -- Priority 4G/3G, no GPRS
   lte-gprs(10)      -- Priority 4G/2G, no UMTS
   lte-gprs-umts(11) -- Priority 4G/2G/3G
   umts-lte(12)      -- Priority 3G/4G, no GPRS
   umts-gprs(13)     -- Priority 3G/2G, no LTE
   umts-lte-gprs(14) -- Priority 3G/4G/2G
   gprs-lte(15)      -- Priority 2G/4G, no UMTS
   gprs-umts(16)     -- Priority 2G/3G, no LTE
   gprs-lte-umts(17) -- Priority 2G/4G/3G
Not all possible settings make sense and/or are supported
by all LTE capable Modems.

Context

MIB: BINTEC-MOBILE-MIB
OID: .0.4.1.21.1.5
Type: column
Access: readwrite
Status: current
Parent: mobileSimCfgEntry
Table: mobileSimCfgTable
Siblings: 15

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	auto
`2`	gprs-only
`3`	umts-only
`4`	gprs-pref
`5`	umts-pref
`6`	delete
`7`	lte-only
`8`	lte-pref
`9`	lte-umts
`10`	lte-gprs
`11`	lte-gprs-umts
`12`	umts-lte
`13`	umts-gprs
`14`	umts-lte-gprs
`15`	gprs-lte
`16`	gprs-umts
`17`	gprs-lte-umts

Related Objects

Sibling Objects

Object	Type	Syntax	OID
mobileSimCfgIccId The ICC-ID of the used SIM-Card to configure. Unfortunately some UMTS modem vendors offer no capability to read this ID before entering the valid PIN :-(	column	OctetString	`.0.4.1.21.1.1`
mobileSimCfgCugAddr The provider assigned IP-Address if any.	column	SNMPv2-SMIIpAddress	`.0.4.1.21.1.15`
mobileSimCfgCugAuth The authentication method to be used.	column	Enumeration	`.0.4.1.21.1.16`
mobileSimCfgCugUser The provider assigned user name.	column	SNMPv2-TCDisplayString	`.0.4.1.21.1.17`
mobileSimCfgCugPwd The provider assigned password.	column	SNMPv2-TCDisplayString	`.0.4.1.21.1.18`
mobileSimCfgOperatorScan Handling of scanning available Providers (PLMN) never - use only home or fixed PLMN startup - scan on startup, only for information always - used for using roaming…	column	Enumeration	`.0.4.1.21.1.19`
mobileSimCfgPIN The PIN code of the SIM card. This is used to authorize the access to the SIM-Card.	column	OctetString	`.0.4.1.21.1.2`
mobileSimCfgPinData Not accessible entry for storing the PIN permanently. This is a security feature (?) used by France Telecom.	column	OctetString	`.0.4.1.21.1.20`
mobileSimCfgCugAPN Closed User Group authentication APN, may be different from registration APN.	column	OctetString	`.0.4.1.21.1.21`
mobileSimCfgPUK The PUK code of the SIM card. Needed in case of wrong PIN input for three times in a row.	column	OctetString	`.0.4.1.21.1.3`
mobileSimCfgAPN GPRS APN (Access Point Name) used by this SIM-Card.	column	OctetString	`.0.4.1.21.1.4`
mobileSimCfgRoamingMode The Roaming configuration for this mobile interface. Possible values are: disabled - no roaming at all auto - roaming decision by modems factory defaults …	column	Enumeration	`.0.4.1.21.1.6`
mobileSimCfgRoamingPLMN The PLMN (Public Land Mobile Netword) code used for Roaming. Used only if mobileDevCfgRoamingMode_fixed is selected.	column	SNMPv2-SMIInteger32	`.0.4.1.21.1.7`
mobileSimCfgDispatch The dispatch service the Modem should be used for. The SIM-Card should support/enable basic functionality to use the service (eg access circuit switched networks to use V.110 and/…	column	Enumeration	`.0.4.1.21.1.8`
mobileSimCfgGsmFallback If the Router is called using the GsmFallback number the actual connection is dropped and the Access Type is switched back from UMTS to GSM.	column	OctetString	`.0.4.1.21.1.9`