ipHostAccessWalledURL

BINTEC-HACC-MIB · .0.62.1.1.6
Commands MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
If not empty, meaning depends on value of field
ipHostAccessLoginViaWalledGarden:
- false: Two frames are used. During login, left frame shows
    internal login-page, and right frame shows specified
    walled-garden-page, e.g. 'http://www.thecompany.com/'.
    After successful login, if ipHostAccessPostLoginURL is empty,
    right frame is kept. Otherwise, right frame is replaced by
    related external post-login-page.
- true: Single frame is used. URL specifies external login-page
    to be used instead of internal one. External server must make
    sure that client sends its account-data to Hotspot-gateway
    for access-control afterwards. After successful login,
    if ipHostAccessPostLoginURL is empty, frame is replaced by
    internal status-page. Otherwise, frame is replaced by related
    external post-login-page.
This field can be deactivated via empty string or via field
ipHostAccessWalledStatus. In this case, the following
default-scenario applies: Single frame and internal login-page
  is used. After successful login, if ipHostAccessPostLoginURL is
  empty, frame is replaced by internal status-page. Otherwise,
  is replaced by related external post-login-page.

Context

MIB
BINTEC-HACC-MIB
OID
.0.62.1.1.6
Type
column
Access
readwrite
Status
current
Parent
ipHostAccessEntry

Net-SNMP examples

How SNMP and these commands work

Walk the column to discover its indexed instances, or supply every index to read one instance.

Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BINTEC-HACC-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BINTEC-HACC-MIB::ipHostAccessWalledURL'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'BINTEC-HACC-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BINTEC-HACC-MIB::ipHostAccessWalledURL.<ipHostAccessIfIndex>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'BINTEC-HACC-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'BINTEC-HACC-MIB::ipHostAccessWalledURL'

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString
Display format
255a
Type Description
Represents textual information taken from the NVT ASCII
          
character set, as defined in pages 4, 10-11 of RFC 854.
          
To summarize RFC 854, the NVT ASCII repertoire specifies:
          
  - the use of character codes 0-127 (decimal)
          
  - the graphics characters (32-126) are interpreted as
    US ASCII
          
  - NUL, LF, CR, BEL, BS, HT, VT and FF have the special
    meanings specified in RFC 854
          
  - the other 25 codes have no standard interpretation
          
  - the sequence 'CR LF' means newline
          
  - the sequence 'CR NUL' means carriage-return
          
  - an 'LF' not preceded by a 'CR' means moving to the
    same column on the next line.
          
  - the sequence 'CR x' for any x other than LF or NUL is
    illegal.  (Note that this also means that a string may
    end with either 'CR LF' or 'CR NUL', but not with CR.)
          
Any object defined using this syntax may not exceed 255
characters in length.

Values & Constraints

Type Constraints
range: 0..255