BINTEC-HACC-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
5
Rows
5
Columns
61
.0.62.1 · 1 row entry · 21 columns
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk ipHostAccessTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BINTEC-HACC-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BINTEC-HACC-MIB::ipHostAccessTable'
The (conceptual) table listing the interfaces on host
access authentication is enabled.
ipHostAccessEntry row .0.62.1.1
An entry (conceptual row) representing an interface on
which host access authentication is enabled.
Column Syntax OID
The status of this entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.0.62.1.1.1
The corresponding interface for which host access authentication
should be applied.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.0.62.1.1.2
The default password used for authentication.
If defined, only a valid vouchure ID is
needed for authentication.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.0.62.1.1.3
This object specifies together with ipHostAccessWalledNetmask
the network where hosts can communicate without authorization.
Further walled-garden-entries can be specified by domain-name
via table ipWalledGardenDomainCf…
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.0.62.1.1.4
The netmask which corresponds to ipHostAccessWalledNetwork.
The whole walled-garden-feature can be deactivated via field
ipHostAccessWalledStatus.
SNMPv2-SMIIpAddressr/w
Type Constraints:
range: 4
.0.62.1.1.5
If not empty, meaning depends on value of field
ipHostAccessLoginViaWalledGarden:
- false: Two frames are used. During login, left frame shows
internal login-page, and right frame shows specified
walled-garden-p…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.0.62.1.1.6
The URL of the Terms & Conditions link shown in the internal
login-page, e.g. 'http://www.thecompany.com/'.
This field can be deactivated via empty string or via field
ipHostAccessWalledStatus or indirectly (together wi…
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.0.62.1.1.7
The domain name which automatically will be appended
to the username during authentication.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.0.62.1.1.8
The re-authentication-period in seconds.
A value of 0 is interpreted as NO re-authentications.
sSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.0.62.1.1.9
The default session-timeout-period in seconds that is used if the
Radius-server does not specify it. In deviation from RFC 2865,
section 5.27, a value of 0 is interpreted as NO session-timeout.
sSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.0.62.1.1.10
The default maximum number of received plus sent bytes if the
Radius-server does not specify it. 0 means NO limit. Radius
standard does not specify any attribute for this maximum.
SNMPv2-SMICounter64r/w
Type Constraints:
range: 0..18446744073709551615
.0.62.1.1.11
The default idle-timeout-period in seconds that is used if the
Radius-server does not specify it. In deviation from RFC 2865,
section 5.28, a value of 0 is interpreted as NO idle-timeout.
sSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.0.62.1.1.12
The default accounting-interim-interval in seconds that is used
if the Radius-server does not specify it. In deviation from
RFC 2869, section 5.16, a value of 0 means NO interim-updates.
sSNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
.0.62.1.1.13
Toggles calculation of session-time (RFC 2866, section 5.7).
For with-idle-time(1), the session-start is subtracted from the
current time. For without-idle-time(2), it is subtracted from
time of the latest sent/received…
Enumerationr/w
Enumerated Values:
1with-idle-time
2without-idle-time
.0.62.1.1.14
Toggles activation of walled-garden-feature and of dependent
fields ipHostAccessWalledNetwork, ipHostAccessWalledNetmask,
ipHostAccessWalledURL, ipHostAccessTermsURL,
ipHostAccessLoginViaWalledGarden, and of dependent t…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.0.62.1.1.15
Default-language used for Web-interface.
OctetStringr/w
Constraints:
range: 3-3
.0.62.1.1.16
The unique index of this entry.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.0.62.1.1.17
Toggles between internal and external/customised login-page.
- false: Internal login-page is used.
- true: External login-page is used.
More details on possible scenarios are described with field
ipHostAccessWalledURL.
Enumerationr/w
Enumerated Values:
1false
2true
.0.62.1.1.18
Toggles whether browser is requested to open popup-window with
status-info after successful login.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.0.62.1.1.19
The URL of the external page to be shown after successful login.
This field can be deactivated via empty string.
More details on possible scenarios are described with field
ipHostAccessWalledURL.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.0.62.1.1.20
Number of subsequent re-authentication-attempts before related
client-session is aborted when RADIUS-replies are missing.
Sets balance between tight synchronisation with RADIUS-server
and robustness against temporary wi…
Integer32r/w
Constraints:
range: 1-65535
.0.62.1.1.21
.0.62.2 · 1 row entry · 29 columns
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk ipHostAccessClientTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BINTEC-HACC-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BINTEC-HACC-MIB::ipHostAccessClientTable'
List of known clients which requested host 
access authentication.
ipHostAccessClientEntry row .0.62.2.1
An entry representing a client on a particular interface which
has requested host access authentication.
Column Syntax OID
The interface index where the client is coming from.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.0.62.2.1.1
The client's user name in upper/lower-case-writing as entered by
the user. Please note that only one entry per user is allowed.
The internal check for double-entries is done case-insensitively
because many people use up…
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.0.62.2.1.2
The client password.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.0.62.2.1.3
The client's IP address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.0.62.2.1.4
The client's hardware address.
SNMPv2-TCPhysAddress
Description:
Represents media- or physical-level addresses.
.0.62.2.1.5
The time when the client has successfully authenticated.
Valid only if ipHostAccessClientAdminStatus is NOT pending.
.0.62.2.1.6
The time when the client expires. 0 means NO expiry.
Valid only if ipHostAccessClientAdminStatus is NOT pending.
.0.62.2.1.7
The client-status is initialised to <pending>. After successful
(initial) authentication, it is updated to <active>. Setting it
to <delete> kills the related client-entry and triggers the final
Radius-account-request. I…
Enumerationr/w
Enumerated Values:
1active
2delete
3pending
.0.62.2.1.8
Max. number of bytes this client can transfer. 0 means NO limit.
Valid only if ipHostAccessClientAdminStatus is NOT pending.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.0.62.2.1.9
Current number of incoming packets for this client.
Valid only if ipHostAccessClientAdminStatus is NOT pending.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.0.62.2.1.10
Current number of outgoing packets for this client.
Valid only if ipHostAccessClientAdminStatus is NOT pending.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.0.62.2.1.11
Current number of incoming octets for this client.
Valid only if ipHostAccessClientAdminStatus is NOT pending.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.0.62.2.1.12
Current number of outgoing octets for this client.
Valid only if ipHostAccessClientAdminStatus is NOT pending.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.0.62.2.1.13
Timestamp of latest in-packet: accounted-remote->client
Valid only if ipHostAccessClientAdminStatus is NOT pending.
.0.62.2.1.14
Timestamp of latest out-packet: client->accounted-remote
Valid only if ipHostAccessClientAdminStatus is NOT pending.
.0.62.2.1.15
Timestamp of latest in-packet: walled-garden->client
Valid only if ipHostAccessClientAdminStatus is NOT pending.
.0.62.2.1.16
Timestamp of latest out-packet: client->walled-garden
Valid only if ipHostAccessClientAdminStatus is NOT pending.
.0.62.2.1.17
Timestamp of latest in-packet: router->client
Valid only if ipHostAccessClientAdminStatus is NOT pending.
.0.62.2.1.18
Timestamp of latest out-packet: client->router
Valid only if ipHostAccessClientAdminStatus is NOT pending.
.0.62.2.1.19
Timestamp of latest access-request.
.0.62.2.1.20
Timestamp of latest accounting-request.
Valid only if ipHostAccessClientAdminStatus is NOT pending.
.0.62.2.1.21
Latest reported number of incoming octets for this client.
Valid only if ipHostAccessClientAdminStatus is NOT pending.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.0.62.2.1.22
Latest reported number of outgoing octets for this client.
Valid only if ipHostAccessClientAdminStatus is NOT pending.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
.0.62.2.1.23
Latest reported session-time in seconds.
Valid only if ipHostAccessClientAdminStatus is NOT pending.
sSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.0.62.2.1.24
The idle-timeout-period in seconds that is used for the client
(coming from Radius-server or from default-value).
In deviation from RFC 2865, section 5.28, a value of 0 is
interpreted as NO idle-timeout.
Valid only if i…
sSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.0.62.2.1.25
The accounting-interim-interval in seconds that is used for the
client (coming from Radius-server or from default-value).
In deviation from RFC 2869, section 5.16, a value of 0 is
interpreted as NO interim-updates.
Vali…
sSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.0.62.2.1.26
Copied from related ipHostAccessSessionTimeReporting entry.
This avoids complications when this field is toggled.
Enumeration
Enumerated Values:
1with-idle-time
2without-idle-time
.0.62.2.1.27
The accounting-terminate-cause as described in RFC 2866,
section 5.10. See ipHostAccessClientAdminStatus for more details.
If not set explicitly, <Lost Service> is used as default-value.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.0.62.2.1.28
This counter is initialised to 0 and increased whenever
re-authentication fails because of no reply (e.g. because WAN
down or server too slow). It is reset whenever re-authentication
succeeds. When the counter reaches t…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.0.62.2.1.29
.0.62.4 · 1 row entry · 4 columns
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk ipWalledGardenDomainCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BINTEC-HACC-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BINTEC-HACC-MIB::ipWalledGardenDomainCfgTable'
Table of allowed domains for ipHostAccess
Column Syntax OID
The unique index of this entry.
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.0.62.4.1.1
The administrative status of this entry.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3delete
.0.62.4.1.2
The parent index in ipHostAccessTable (ipHostAccessIndex)
SNMPv2-SMIInteger32r/w
Type Constraints:
range: -2147483648..2147483647
.0.62.4.1.3
The domain name or IP address in dotted format.
SNMPv2-TCDisplayStringr/w
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.0.62.4.1.4
.0.62.5 · 1 row entry · 5 columns
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk ipWalledGardenDomainOperTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BINTEC-HACC-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BINTEC-HACC-MIB::ipWalledGardenDomainOperTable'
Oper table of allowed domains for ipHostAccess
Column Syntax OID
The unique index of this entry.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.0.62.5.1.1
The parent index in ipWalledGardenDomainCfgTable
(ipWalledGardenDomainCfgIndex). This might be 0 if no relation to
any ipWalledGardenDomainCfgTable exists.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.0.62.5.1.2
The parent index in ipHostAccessTable (ipHostAccessIndex)
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.0.62.5.1.3
The domain name or IP address in dotted format.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.0.62.5.1.4
The time to live until next DNS query has to be initiated.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.0.62.5.1.5
.0.62.6 · 1 row entry · 2 columns
Uses the bintec variant from /opt/observium/mibs/bintec.
Command help
Walk ipWalledGardenAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BINTEC-HACC-MIB' -M '/opt/observium/mibs/bintec:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BINTEC-HACC-MIB::ipWalledGardenAddressTable'
Table of allowed addresses for ipHostAccess
An entry representing an IP address for which
host access authentication is enabled.
Column Syntax OID
The parent index in ipWalledGardenDomainOperTable with same
value for ipWalledGardenDomainOperIndex.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
.0.62.6.1.1
This object specifies together with ipWalledGardenAddressNetmask
the network where hosts can communicate without authorization.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
.0.62.6.1.2